Screw Pumps Dealers in Ahmedabad

effluent treatment:- raw sewage water digested & activated sludge drained sludge up to 40% dry contents.chemicals:- acidic & alkaline slurry dyes alum , viscous adhesive dispersion & emulsion detergent slurry soap slurry. dairy :- milk , butter , cream , crystal , paste , soft cheese , cottage cheese.fruits & vegetable processing :- fruits & vegetable juices & pulp tomato pulp. sweets & confectioneries :- glucose , chocolate compounds jams , honey, paints & warnishes :-dispersion paints , printing ink , oil pasters , solvent binding agent , high viscous oil verosore oil / furnace oil / lubricating oil / grease. pulp & paper :- alum solutions , high consistency pulp , coating paint , glues , milk of lime , sludges. sugar & distilleries :- juices , magma syrups , molasses , waste water sludge.   material of construction • housing parts pump :- gray ci (is 210 fg 220) , rubber / frp lined , ss-304, ss-316 & special alloys. • stator : natural , nitrile, nerprene , epdm , hyplon , viton , food grage & special quality rubber. • rotor : heat trated tool steel , ss-304 & ss-316 and other special alloys • rotating parts :- tool steel ,ss-304 , ss-316 and other special alloys   salient features • self priming • non – clogging • positive displacement • pulsation free delivery • temperature up to 200ºc • flow rate proportional to pump speed • pumping direction reversible • can handle high percentage of solids output up to 200m3/hr, • vulcanized stator simple to be changed • high resistance to wear • simple construction • easy to dismantle & assemble • pressure 6 up to 30kg/cm2 even at small quantities or low speed • no valves essential for delivery .

• Brand: Edwards
• Model: EOS 350i
• Weight: 500 kg
• Peak pumping speed: 400 / 240 m3/h / cfm
• Ultimate vacuum: 0.35 / 0.26 mbar / Torr
• Inlet connection: DN 80
• Outlet connection: DN 60
• Shaft power: 5.5 kW
• Permissible ambient temperature: 0 - 46 C
• Noise level range: 51-65 dB(A)
• Oil quantity: 16 L
• Dimensions: 1266x934x1083mm

The company is counted amidst the prominent Screw Pumps Manufacturers and Suppliers in India. These Screw Pumps are made as per the latest technology and industrial quality standards. Our Screw Pumps can be availed at the most competitive prices. Pumping Principle : Positive Displacement Progressive Cavity Screw Pump has unique pumping principle that employs a precisely manufactured metallic single helical rotor turning inside a double internal helical resilient stator. Thereby forming cavities confined by a “Sealing Line” which is maintained at stand still and during rotation. While the rotor rotates in the stator, the cavity formed between them progresses form suction to delivery side, gently carrying the medium. Material of Construction : Standard VSM series pumps are made of Cast Iron casting. All the rotating parts including the rotor are made of Ni-cr or Stainless Steel. For abrasive applications tool steel hardened and hard chrome plated rotor is used. Shaft sealing is ensured by soft gland packing or mechanical seal as desired. Stores are usually of natural or nitrile polymer, but to suit the mediums, EPDM, hypalon, silicon are also used. The Standard VBM series pumps have wettable pump housing and rotating parts of SS304/SS316. For special application of highly corrosive fluids Ebonite /FRP Lined housing parts are used, while rotating parts made of Haste-alloy, Alloy 20 or other Super Alloys. Both AM & BM pump series pumps are supplied with I.S.O. suction and delivery connection. Alternately pumps can also be supplied with B.S., DIN or special connections to suit the specific requirements. Characteristics : Good self priming properties even with air or gas inclusion in the liquid up to 8.5 MWCHandles solids in suspension or mixture containing high percentage of solids. Bigger size pumps up to 40 mm diameter Steady and smooth flow with little pulsation makes it suitable for dosing and metering dutiesDirection of the flow through the pump is reversible by merely changing direction of rotation of the prime mover The pressure head is independent of speed and capacity is proportional to speedGate and check valves are not necessaryThe metal bonded high precision molded stator ensures, high efficiency pressure and increased lifeIt is suitable for dosing and metering duties because of its sturdy and smooth flow with slight pulsation. Stator is metal bonded, guarantees high efficiency, pressure and improved life. Technical Details : Capacity : 150 Cu.M/Hr Head : up to 240 meters ( 24 kg/cm2 ) Temperature : Up to 200 Deg C Viscosity : Up to 5,00,000 CST Solids Handling Capacity : Up to 40 mm Application : Brewery CeramicsChemicalConstructionCosmeticDetergent Distillery Calcium Dyestuff SugerTextile EffluentEdible OilFertilizerMarinePharmaceuticalsPaperPaintSweage TreatmentSoap Application : Acids Acrylic Emulsion Alkaline Slurry AL Hydroxide Gel Carbonated Bewerage Chemical SlurryCeramic SlurryCoating Mix Domestic Effluent Detergent Slurry Sizing PasteTribasic LeadViscoseDyestuffEmulsion Explosive Slurry Instant Tea Floral ConcreteLatexLime Slurry Lube Oil Lubricating Oil MagmaSolventsSulphateYeast MolassesOil SlurryPaintPaintPaper ULP Printing Colour Precipiated CarbonateResinRice Bran Oil Soap SolutionSuger Juice Vegetable Oil

• Max Flow Rate: 500 M3/HR
• Number Of Stages: Single stage
• Country of Origin: Made in India
• Type: DRY SCREW VACUUM PUMPS
• Power: 1HP TO 50HP
• Phase: 3
• Usage/Application: Industrial
• Model Name/Number: ED 20

We are a notable name in the domain offering the best in class and quality Screw Pumps. We are a name synonymous to trust and quality, thus we make every attempt to bring forth only finest product range that is manufactured using premium quality range of products.

• Voltage: 220 - 380 V
• Power Source: Electric
• Phase: 3 phase
• Frequency: 50 / 60 Hz
• Usage/Application: Industrial
• Material: SS, CI

We are offering all types of three connection fig pump that are available from us at very nominal rates.

• Material: Mild Steel
• Head: 67
• Frequency: 50 H
• Voltage: 415V
• Max Flow Rate: 68
• Usage/Application: industrial

• Material: Stainless Steel
• Power Source: Electric
• Voltage: 220 V
• Frequency: 50 Hz
• Brand: Reliable
• Color: Blue
• Number of Screw: Single

• Type: Feed Pump
• Application: Fuel Supply
• Weight: 100-200kg, 200-300kg
• Voltage: 220V, 380V, 440V
• Theory: Axial Flow Pump, Centrifugal Pump
• Power: 1-3kw, 3-5kw, 5-7kw
• Driven Type: Electric
• Pressure: High Pressure, Low Pressure, Medium Pressure
• Structure: Diaphragm Pump, Multistage Pump, Single Stage Pump
• Automation Grade: Automatic, Manual, Semi Automatic

• Capacity: Up to 2500 lpm
• Diff. Pressure: Up to 280 bar
• Operating parameters Viscosity: From 3 cSt to 50,000 cSt
• Fluid Temperature: Up to 80 deg. centigrade
• Speed: Up to 11000 rpm.
• Casing options: Cast Iron / Cast Steel / Fabricated / SG Iron
• Casing Insert Options: Cast Iron / Aluminium / No casing insert
• Screws: Carbon Steel / Alloy Steel
• Sealing Options: Gland packing / Mechanical seal
• Relief valve options: Built-in / LiHorizontal Foot / Horizontal Flange / Vertical Pedestal / Vertical Tankne mounted
• Construction Features Bearing options: Internal / External ball bearing / Bush bearing
• Relief valve options: Built-in / Line mounted

If you need to move Biogas slurry at a constant rate, the answer could be to use a positive displacement pump. This type of equipment is able to handle viscous Biogas fluids more efficiently than some other types of pump. The Progressing Cavity Pump can also deal with high dry matter content media (up to 10-12 %). With conventional rotary piston pumps this would not be possible (max. 9 % dry matter content). Despite the strong performance, the pump runs very quietly. We are very satisfied.”

  Series CFP – SS 316 Centrifugal Chemical Transfer Pumps Complete SS 316 Horizontal Centrifugal pumps with High head & High discharge design. Front openable Suction casing for easy operation and maintenance. Hydraulically balanced impeller for better efficiency and lower power consumption. Fabricated from SS 316 rolled steel sheet give better surface finish and low liquid friction. Sealing by Mechanical seal of either Carbon, Ceramic, Silicon or Pure Teflon gland packing. Ideally suitable for mild chemical transfer from underground to overhead tank, unloading from tanker, washing and cleaning of parts, Food and dairy products, beverages etc.   FEATURES & APPLICATION › SIMPLE & FRONT OPEN DESIGN › ALL CONTACT PARTS OF SS-316 MATERIAL › BEST IN CLASS EFFICIENCY WITH HIGH HEAD AND HIGH CAPACITY › AVAILABLE IN MONOBLOCK & BARE TYPE SEALING BY MECHANICAL SEAL OF CARBON, CERAMIC, SC, TC, & PURE TEFLON PACKING. › SPECIAL HIGH TEMP PUMP UPTO 250 C. › AVAILABLE IN MONOBLOCK OR BARE PUMPS. › ECONOMIC, EFFICIENT & EASY IN MAINTENANCE. › SAFE AND QUITE OPERATION LEVELS. › SUITABLE FOR STANDARD MOTOR OR FLANGE TYPE OR FOOT CAM FLANGE TYPE MOTOR. » PERFORMANCE RANGE › CAPACITY FROM 20 LPM TO 2000 LPM › HEAD UPTO 60 MTRS.3 › SIZE 12MM TO 100MM » MATERIAL OF CONSTRUCTION  › SS - 304/ SS - 316 / SS - 316 L » OPERATING TEMPERATURE › STD. 110 DEG. › HIGH TEMP UP TO 250 DEG. » APPLICATION › IDEAL FOR HANDING OF WATER, DM / DI WATER, MINERAL WATER , HOT WATER, PHARMACEUTICALS LIQUID DRUGS & SYRUPS, MILK, BUTTER MILK, SOFT DRINK, BEVERAGES, SOLVENTS, ACIDS, ALKALIS, LIGHT PETROLEUM PRODUCTS ETC. › ACID AND LIGHT CHEMICALS. › BOOSTER APPLICATION › WATER TREATMENTS PLANTS , RO PLANTSH  

• Pressure: UP TO 25KG/CM2
• Temperature: UP TO 120 DEGREE CELSIUS
• Design: SELF PRIMING
• Model: KCP
• Brand Name: K-TECH
• Head: Up to 250 mtr
• Material: C.I.,C.S.,S.S.
• Max Flow Rate: Dn 25 to 150 mm
• Capacity: UP TO 145M3/HR
• Speed: UP TO 600 RPM
• Discharge Size: 25 TO 150MM

• Driven Type: Electric
• Pressure: Up To 30 Kg/cm2
• Application: Boiler Feeding
• Certification: CE Certified, ISO 9001:2008
• Type: Boiler Feed Pumps
• Country of Origin: India
• Pressure: Up to 30 Kg/cm2
• Brand: Radial Pumps
• Model: RHMP Series
• Capacity: Up to 80 M3/hr
• Head: Up to 300 mtr
• Discharge Size: 32 mm to 100 mm
• Temperature: Up to 140°C
• Speed: Up to 3500 rpm

• Application: industrial

• Usage/Application: Boiler Feeding
• Brand: JIKSAN
• Motor Horsepower: 10 HP
• Model: JIG AND JHIG
• Head: 3000 M
• Max Flow Rate: 2500 LPH

• PUMP CASING: Graded Cast-iron
• SHAFT: Stainless Steel
• IMPELLERS: High tensile brass/Manganese bronze
• GLAND PACKING: Soft asbestos packing Gland

ro : oval flanges rr : round flanges.b : single   stuffing box with ball bearing at the driving end& bush bearing at the free end.bb : stuffing box & ball bearing at both ends.bbl : stuffing box fitted with lantern ring & central space connected by external pipe.a. rotation is clockwise when seen from driving end.b. motor h.r shown are for clear cold water. For higher viscous liquid h.p. Will be required more accordingly.c. pump is suitable to 75 c water. For high temperature you will have to give specific order.d. maximum suction lift 8 mt. By all causes.   applications :•     boiler feed•     irrigation•     car-washer

Offered with Closed Impeller. 2. Impellers are provided Back Wear Ring to minimize Axial Thrust and Gland Leakage. 3. Flange Rating PN 16 to PN 64 . 4. Various Shaft Sealing Available are Gland Packing (ASB. NON ASB. depending on the service.)Moulded Graphite Rings. (GRAFOIL PACKING) c. Mechanical Seals.

Pump casing Closed grained cast iron bearings Ball bearing at driving end and bush bearing at rear end. Impellers: Manganese bronze Shaft: Stainless Steel Gland Packings: Graphite asbestos packings Rotation: Clockwise looking from driving end

• TEMPERATURE: 180°C
• CAPACITY: 10

Three Screw Pumps" already in 1970's. Foreseeing the growing demand for totally reliable fuel and lube oil pumps for Thermal and Hydel Power Plants, Fertilizer, Chemical and Steel Projects a beginning was made by importing critical components and building pumps locally. Over decades, thousands Three Screw pumps have been manufactured and delivered. Three Screw pump technology but equally in the other types - namely Twin Screw, Single Screw Progressing Cavity - as well as the conventional types like Shuttle Block, Internal Gear, External Gear, Trochoidal and Vane types.

• Speed - n -: 960 / 1450 / 2900 rpm
• Temperature: 120 ºC
• Working Pressure: 40 Bars
• Pump sizes – DN -: 32 mm to 100 mm

"Flowchem" Series CMF pumps are Centrifugal Multistage Boiler Feed Pumps, Horizontal, Foot Mounted. Offered with Closed Impeller. Impellers are provided Back Wear Ring to minimize Axial Thrust and Gland Leakage. Flange Rating PN 16 to PN 64 .

• Pressure: upto 8 to 10 kg
• Voltage: 415V
• Country of Origin: Made in India
• Brand: Ganesh Pumps & Engineers
• Head: upto 100 mtr
• Usage/Application: Industrial
• Material: C.I, C.S, SS 304, SS 316, Alloys 20 etc.
• Model Name/Number: GFPP
• Max Flow Rate: upto 105 m3/hr
• Product Type: Industrial Pump
• Size: upto 80 mm
• Speed: 1450 rpm, 2800 rpm & 1750 rpm, 3500 rpm
• Temperature: upto 110 Degree
• Discharge Size: upto 80 mm
• Head Size: 90 mtr
• I Deal In: New Only
• Frequency: 50 Hz and 60 Hz
• Power Source: Electric

• Temperature: Up to 120oC
• Pressure: Up to 25 kg/cm2
• Capacity: Up to 145 m3/hr
• Head: Up to 250 mt
• Discharge Size: Dn 25 to 150 mm
• Speed: Up to 600 rpm

Applications : Sewage Effluent & Water Treatment Plant. Sugar, Starch, Cement, Pulp & Paper Industries. Ceramics, Chemicals, Fertilizers, Soap & Detergents, Cosmetics. Paint, Varnish, Petrochemicals, Vegetable Oils, Mining, Steel and Rubber. Construction, Manmade Fibers, Fisheries, Oil Exploration. Pharmaceuticals, Cattle Feed, Brewery & Distillery, Power. Dairies, Winery, Food & Beverages, Abattoir & Meat Processing. Plantations, Fruit Processing, Dye Stuff, Textiles.   Features : Single rotating element, progressing cavities are generated which deliver a uniform, metered & non-pulsating flow. Head developed is independent of the rotational speed, where as the capacity is proportionate to the speed. Inherently self-priming, the pumps can work on snore & do not require a foot valve. Can Handle solids in suspension or medias containing a high percentage of solids. Suction lift capabilities of up to 9.5 mtr. and effective even in high vacuum conditions. Minimum degradation of shear-sensitive media & can also Handle highly viscous materials having pseudo-plastic characteristics. Due to the reversible rotation capabilities, progressive cavity pumps can perform with equal efficiency in either direction. Rotors turn inside a resilient stator & thus generate little noise   Material of Construction : SS-316, SS-316L, SS-304, SS-304L, duplex stainless steel, super duplex stainless steel, cast bronze, cast steel, cast iron, hastalloy-B & C, alloy-20 etc...

• Country of Origin: Made in India
• Voltage: 220V
• Usage/Application: Boiler Feeding
• Motor Horsepower: 1 HP
• Material: Cast Iron
• Frequency: 50Hz
• Phase: Single Phase

• Pressure: Up to 28.8 kg/cm2
• Capacity: Up to 22 M3/hr
• Head: Up to 288 Mtr.
• Discharge Size: 25 mm to 50 mm
• Temperature: 105°C
• Suction: Lift up to 7 Mtr.
• Speed: Up to 1500 rpm
• M.O.C.: Cast Iron, Bronze, Steel etc.

Applications:         Transfer of liquid containing vapor air or gas.       Boiler feed, marine, refrigeration, fuel oil.       High pressure testing.       Power plant.       Water supply to multi storied building.       Hilly area village.       Sprinkler irrigation.       Industrial clear water.       Condensate water transfer.