Sealmech Valves Rakhial, Ahmedabad, Gujarat

SEALMECH Gate Valves are Bolted Bonnet, Rising Spindle, Outside Screw & Yoke Type construction. SEALMECH Gate valves are available with Solid wedge, Flexible wedge, Split wedge, and Parallel wedge designs offer maximum flexibility and option to clients for their suitable selection. SEALMECH Gate Valve having Deep stuffing box, which provides assure tightness and maximum packing life. Separate properly machined and lapped back seat facilities are provided for replacement of Gland packing when valve is in stream under pressure.

SEALMECH Check Valves are Bolted cover design up to 600# and above pressure seal design. SEALMECH Swing check valves are suitable for vertical and horizontal both line. A SEALMECH wide range of Check Valves (Non-Return Valves) available for oil, gas, water, refining, power and chemical applications, where the prevention of flow reversal is mandatory.

SEALMECH Wafer Design Plate Type Check Valve has short face-to-face dimensions and low weight allows a simple space saving installation between the companion flanges. The valves are suitable to mounting between weld neck or slip on type companion flanges of different standards. They are specially developed for applications where a low-pressure loss is essential. Opening and closing of the valve will take place at an extremely low-pressure difference over the valve disc. The eccentric disc shaft combination with the disc seat guarantees a positive shut off returning media. Wafer check valves are becoming the preferred type of check valve for most applications, due to their compact design and relatively low cost.              Features Body Type: Single Plate, Short Type Suitable For Horizontal and Vertical Mounting Shorter overall length, mounting requires minimum space. Low Pressure Drop Easy to Install Less Weight Maintenance Free Seat Leakage: Zero Leakage, Tight Shut Off Temperature Range: -250 To + 2000 C

SEALMECH Check Valves are Bolted cover design up to 600# and above pressure seal design. SEALMECH Swing check valves are suitable for vertical and horizontal both line. A SEALMECH wide range of Check Valves (Non-Return Valves) available for oil, gas, water, refining, power and chemical applications, where the prevention of flow reversal is mandatory.

SEALMECH is leading manufacturer of Industrial Strainer in wide range with different types varieties. SEALMECH bolted cover design “Y” Type Strainer self mechanically removing solids particles from flowing liquids, Air, Steam or gases by the use of perforated sheet or wire mesh straining element. SEALMECH bolted cover “Y” Type strainer has low pressure drop due to higher flow area through screen. The strainer improves the clearance in the medium, and prolongs the life of valves; protect expensive pumps, meters and other equipments. SEALMECH “Y” strainers are available in wide range of body construction material, pressure ranges and screen sizes for various suitable applications. SEALMECH “Y” strainers are easy to install in either a horizontal or vertical position. During both direction installations, the screening element must be on the "down side" of the strainer body, so the entrapped material can properly collect in it. SEALMECH “Y” strainer also available with drain Plug which can be replaced with Ball valve of Globe Valve for frequent blow off. SEALMECH also can offer P.T.F.E. Lined, Rubber Lined & Fabricated strainers on request.

SEALMEACH Wafer Type, Slim-Seal, Center Disc Butterfly Valves are reliable, maintenance free shutoff with permanently gas-tight seal with an integrally moulded or replaceable elastomer body liner. SEALMECH butterfly valves are available with double gland sealing with P.T.F.E. Bearing Bush. These butterfly valves excess other conventional valves such as gate valve and globe valves in all aspects, especially in terms of light weight, less number of component, no flange gaskets required and economical operation and maintenance costs.

SEALMECH Tubular Type Sight Flow Indicators are Bi-Directional and may be placed in any orientation and so easy to check flow from any side of Sight Flow Indicator. They can be installed vertically or horizontally in the middle of any kind of non-transparent pipeline and are very convenient to observe the flow. SEALMECH offers a sight flow indicators suitable for rugged industrial applications. Sight Flow Indicators provide a quick, reliable and economical way to verify the flow & quality of fluids through industrial process lines. Tubular type Sight Glass is suitable for corrosive chemicals, acids and colored liquids.

SEALMECH Tubular Type Sight Flow Indicators are Bi-Directional and may be placed in any orientation and so easy to check flow from any side of Sight Flow Indicator. They can be installed vertically or horizontally in the middle of any kind of non-transparent pipeline and are very convenient to observe the flow. SEALMECH offers a sight flow indicators suitable for rugged industrial applications. Sight Flow Indicators provide a quick, reliable and economical way to verify the flow & quality of fluids through industrial process lines. Tubular type Sight Glass is suitable for corrosive chemicals, acids and colored liquids. Sight Glass are used primarily in processes, where spot indication is desired to detect presence of media, or to inspect color, clarity, turbidity, or other critical characteristics.   Tubular Type Sight Glass 3600 All Around View Heavy Duty Construction Pressure Up To Max. 10 bar Suitable Up to 1250 C. Temperature Simple & Easy To Replace The Glass Flanged End Connection Drilling as per ANSI B 16.5 / BS 10 / PN / DIN Std. Sizes from 15MM To 200MM M.O.C.: Cast Steel / S.S. 304 / 316 / 304L / 316L Gasket: P.T.F.E. / CAF Tempered Borosilicate Glass

Sealmech range of Needle valves are available in bar stock round & Square body with Screwed (BSP/NPT), Socket Weld, Butt Weld & Flange End Connection. Needle valves are similar in design and operation to the globe valve. Instead of a disk, a needle valve has a long tapered point at the end of the valve stem. The long taper of the valve element permits a much smaller seating surface area than that of the globe valve; therefore, the needle valve is more suitable as a throttle valve. Normally the material of Needle Valve bodies and its various parts is SS 304, SS316, SS 304L or SS 316L, but depending on the application and the system requirements brass, monel, hastalloy can also be used. Needle valves are used to control flow into delicate gauges, which might be damaged by sudden surges of fluid under pressure. Needle valves are also used to control the end of a work cycle, where it is desirable for motion to be brought slowly to a halt, and at other points where precise adjustments of flow are necessary and where a small rate of flow is desired. Sealmech Needle Valve Size range is from 1/4" to 2" in round and square body construction and pressure rating up to 5000 psig.

Material : Mild Steel

Media : Water

Color : Blue

Finishing : Paint Coated

SEALMEACH make Globe Valves are OS & Y Type, Rising Spindle & Bolted Bonnet Design. Sealmech specially designed globe valve ensure 100% smooth flow area to reduce pressure drop across the valve. Specially designed gland packing and deep stuffing box is providing to assure tightness and maximum long packing life. Properly machined and lapped back seat facilities are provided for replacement of Gland packing when valve is in stream under pressure. SEALMEACH make globe valves are available in On-Off Disc, Control Disc and Parabolic Disc type. Stellited trims are generally provided for all above 600# valves and in lower rating also on request. SEALMEACH also offer extra long, extended bonnet design globe valve for low temperature and cryogenic services. SEALMEACH also manufacturing Globe Valves with Gear Box / Pneumatic Spring & Diaphragm Type Actuator / Pneumatic Cylinder operated along with accessories like Solenoid, Valve Positioners, I/P Converter, Limit Switches, and Air Filter Regulator etc.

Sealmech Gauge Glass Cock are Fabricated from Solid Round Bar Stock in Plug type design or Needle type design with vent & drain arrangement & available in Screwed (BSPNPT) & Flanged End Connection. Generaly the Gauge Glass Cock are used for measuring the level of liquid in chemical storage tank.

Sealmech Gauge Glass Cock are Fabricated from Solid Round Bar Stock in Plug type design or Needle type design with vent & drain arrangement & available in Screwed (BSP/NPT) & Flanged End Connection. Generaly the Gauge Glass Cock are used for measuring the level of liquid in chemical storage tank. Sealmech Gauge Glass Cock Size range is from 1/2" to 2" in Flanged & Screwed Connection with material of construction S.S. 304, S.S. 316, S.S. 304L, or S.S. 316L and others on special request.

Gauge glass, Sealmech Gauge Glass Cock are Fabricated from Solid Round Bar Stock in Plug type design or Needle type design with vent & drain arrangement & available in Screwed (BSPNPT) & Flanged End Connection. Generaly the Gauge Glass Cock are used for measuring the level of liquid in chemical storage tank.

SEALMECH Gate Valves are Bolted Bonnet, Rising Spindle, Outside Screw & Yoke Type construction. SEALMECH Gate valves are available with Solid wedge, Flexible wedge, Split wedge, and Parallel wedge designs offer maximum flexibility and option to clients for their suitable selection. SEALMECH Gate Valve having Deep stuffing box, which provides assure tightness and maximum packing life. Separate properly machined and lapped back seat facilities are provided for replacement of Gland packing when valve is in stream under pressure. SEALMECH also offer extra long, extended bonnet Gate valve for low temperature and cryogenic services. Antifriction thrust bearing is provided in yoke sleeve for higher sizes and classes. SEALMECH Gate valves are available under any Third party inspection. SEALMECH Gate Valves are also available with Gear, Pneumatic Cylinder, Electrical Actuator operated along with accessories like Solenoid, Limit Switch, Air Filter Regulator etc.

Size : 4Inch

Material : Stainless Steel

Feature : Corrosion Resistant

Media : Water

Material : Mild Steel

SEALMECH “A” weir type diaphragm valves are available with wide combination of body material, body rubber lining, types of operation and body end connection to satisfy the need of most industrial application. High quality standards are strictly maintained, each valve being checked for size, design pressure, operation, MOC, finish etc and with in house painting. SEALMECH ‘A’ weir Diaphragm Valve having rugged design to incorporating the best material available is proved by easy, smooth and maintenance free operation for a long time.SEALMECH offers diaphragm valves with various body elastomers lining like P.T.F.E., Hypalon, Natural, Ebonite, Neoprene, EPDM & Butyl and others on request.

SEALMEACH Wafer Type, Slim-Seal, Center Disc Butterfly Valves are reliable, maintenance free shutoff with permanently gas-tight seal with an integrally moulded or replaceable elastomer body liner. SEALMECH butterfly valves are available with double gland sealing with P.T.F.E. Bearing Bush. These butterfly valves excess other conventional valves such as gate valve and globe valves in all aspects, especially in terms of light weight, less number of component, no flange gaskets required and economical operation and maintenance costs. SEALMEACH body seat design offer a very lower torque, tight shut off with zero leakage, and long life service. The slim-seal design valves are widely available with different combination of body, seat (liner) & disc materials to satisfy the need of most industrial application.   Center Disc, Slim-Seal Design Moulded/Replaceable Seat option Double Gland Sealing Arrangement Short Face To Face, Wafer Design Body Smooth, Easy, Maintenance Free Version Less Weight, Easy To Install   SEALMEACH High performances Butterfly Valves are also available with P.T.F.E. (PFA/FEP) lining and Nylon Coating on Disc. SEALMEACH covers Pneumatic Rotary, Quarter Turn Actuator / Pneumatic Cylinder operated valves along with accessories like Gear Box, Solenoid, Limit Switch, Valve Positioner, I/P Converter, Air Filter Regulator etc.

ealmech offer floating, tunion mounted ball valves in single piece, two piece & three piece design construction to suit wide range of application and pressure rating up to 800 class in reduce & full port construction. sealmech high superior quality ball valves advanced features such as anti - static devices, leak proof multi seal system, blow out proof stem operate the valve safely even at high differential pressure, and lower operating torques due to high spherocity & smooth surface finish of ball. electro-polished, buff finish & ultra clean valve also can be provided for food & pharmaceutical industries on request. sealmech soft-seated ball valves gives zero leakage, tight shut-off and easy smooth operation at temperature ranging from -200 to +2200 c.   fire safe design ball valve sealmech also manufacturing fire safe design ball valve conformance to api 607/api 6fa/bs 6755 part ii assures highest standard of safety with third party inspection on request. sealmech also manufacturing jacketed, p.t.f.e. (pfa/fep) lined, multi-port design (three way / four way), flush-bottom design & extended stem ball valves. sealmech offer ball valves with gear box / pneumatic rotary, quarter turn actuator / pneumatic cylinder operated along with accessories like solenoid, limit switches & air filter regulator etc.