Sectional Warping Machine Dealers in Odhav, Ahmedabad

• Working Width: 1600 mm to 4200 mm
• Beam Flange Diameter: 800/1000/1250 mm
• Cone Angle: 7 Deg/9 Deg/11 Deg
• Warping Speed: 0-1000 mts/min
• Beaming Speed: 0-100 mts/min (Higher on request)
• Drum Circumference: 2.5mtr / 3mtr

Special Features : Auto Advance Warp Table : Crossing and warping combs are placed in a way that the thread run from the creel to the drum is as straight as possible, without unnecessary elbows not angles. The warping comb can be placed very near to the drum, which causes a very exact conduction of the section width. When thickness of rolled yarn increases on the drum, the comb back up automatically and simultaneously with the advance and according to the inclination angle of the cone, so that the distance between comb and drum is kept constant from the beginning to the end of the section. When the section is over, machine moves automatically and places itself in the home position for beginning following section, according to previously chosen length & with an accuracy of 1/10 millimeter. The warping comb goes forward to initial position. Touch Screen Display : All indication pilots placed in display box and in a semaphore visible from anywhere indicate the reason of drum stop: Thread breaking end or meters of length or any type failure notice like software, hardware and electrical. Beam Tension : Special designe develop by 'Bobbiler' to produce perfect weaver beam to get optimum efficiency for automatic looms. Boths pressure relief valve are separate for warping and beaming to get require beam tension control increase and decrease by manually of the yarn sheet during beaming. Leasing Device : With this device Yarn layers do not accumulate any where, but they pass through the crossing comb & the guide thread comb, in open state, directly to the drum. So the tangle of threads among themselves is avoided. The crossover for the placing of crossing cords is very wide and permits the worker to introduce them comfortably & without any auxiliary means. The crossover formation is done by vertical movement of the crossing comb. Beaming : Integral robust beaming structure attached with machine structure. Wide range of warp lengths and beam flange dia. Both side movable beaming structure(Beam hold lever) on chrome plated pipe by hand wheel. Beam up-down facility by hydraulically. Salient Features : Integral Beaming structure Hydraulic Band Brake with power failure device Constant warping & beaming speed Digital display for desired process data

• Beam Diameter: ∅800mm / ∅1000mm / ∅1100mm /∅1250mm
• Working Width: 1800mm to 4000 mm
• Warping Speed: 600 m/min (higher on request)
• Beaming Speed: 100 m/min
• Cone Angle: 7° to 10.5°
• Drum Diameter: ∅800mm / ∅1000mm
• Drum Circumference: 2500mm / 3140mm
• Warp table traverse control: Servo
• Static eliminator: Optional for warping table and leasing device
• Waxing device: Optional
• Beam pressure roller: Optional

Sectional Warping Machine, Warping Machine, warping creel, Textile Machines

Sectional Warping Machine, Polycarbonate, Hensel Electric

high speed sectional warping machine, Hydraulic

sarvomatic sectional warping machine, sample warping machine

Sectional Warping Machine, Textile Machinery, semi high speed sizing machine