Lenzing Optifil Automatic Self Cleaning Filter
Get Price Quote
Lenzing Optifil Automatic Self Cleaning Filter Lenzing OptiFil® OptiFil® is a fully automatic, continuous system that works according to the principle of depth, surface or cake filtration. A metal fiber fabric or fleece is used as filter material, which retains particles of different sizes either inside or on its surface. After the pre-determined degree of contamination has been reached, the filter material is cleaned by backwashing a small quantity of filtered medium, while filtration continues during the backwash. Features : Filter fineness from 1 ¼m to 100 ¼m High solid content compared to other common automatic filtration systems High flow rates Highest filtration efficiency Partial backwash during filtration Minimum losses due to patented regeneration system Low operation and maintenance costs Sizes for virtually all flow rates available Filters designed for operation pressure of 10 bar, Higher pressures are possible upon request Space-saving plant setup and maintenance area Completely closed system Application : Chemicals - acids, dyes, solvents, resins, paint Water: process water, river water, sea water, drinking water, demineralised water, cooling water, circulation water, waste water Food and Beverage: juice Oils: mineral oil, synthetic oil, hydraulic oil, lubrication oil, gear oil
Self Cleaning Filters
80,000 Per Piece
1 Piece(s) (MOQ)
Self Cleaning Filters are widely used for continuous filtration requirements without any replacement of Filter Consumables and Exposure of operators. Like auto backwash filter, Scrapper Mechanism Self Cleaning is used for preliminary filtration following the same principle of differential pressure; the only difference is, it is used for applications where back washing medium is not available. In other words, Scrapper Mechanism Self Cleaning Filter is used where in one cannot introduce any additional substance for back washing.
Best Deals from Self Cleaning Filters
Auto back flush Self Cleaning Filter
Get Price Quote
We are offering Self cleaning filter is constructed of filter housing, filter element, back flushing valve, differential pressure gauge, differential pressure switch, Dust Extraction assembly,Geared motor with Sensor and Control Panel. Filter housing can be offered in various material of construction such as various grades of stainless steel, carbon steel and alloy metal. Filter element can be offered in wedge wire, multi layered wiremesh, and plain wiremesh configuration, depending upon process requirement. These filters can offer filtration level starting from 1 micron to 2000 micron. They are designed to deliver flow rate up to 2000 m3hr or even more than that with parallel configuration
Self Cleaning Filters
1 - 1,000,000 Per Piece
2 Piece (MOQ)
Hydra self-cleaning filter
Get Price Quote
Hydra is a self-cleaning filter that effectively removes sediments. The filters are easy to clean (both automatically or manually opening a drain ball valve at the bottom of the filter) using a counter-current washing system. The drain system blocks the reflux of ejected water for a highly efficient cleaning process. The self-cleaning filters pair with stainless steel net DOE, Polyester net DEO, and Plated polypropylene DOE cartridge filters. Available in connection options of ½”, ¾”, 1 ¼”, 1 ½“ with brass or plastic thread and of ½”, ¾”, 1” in Plastic with NPT thread.
self cleaning water filter
120,000 Per Piece
1 Piece (MOQ)
DISC TYPE SELF CLEANING FILTER
Get Price Quote
We are leading disc type filter manufacturer & exporters in india. Disc Type Self Cleaning Filter is used for highly viscous material filtration like Greece, Lube Oil, Edible Oil, Toothpaste & many more. Here, we don’t required any backwashing media to clean the Filter Element. It is working under principle of differential pressure parameters for uninterrupted filtration requirement. Disc type self-cleaning filter is constructed of filter housings, filter elements, and drain valve. It also has a pneumatic cylinder and timer-based drain valve. Filter housings can be offered in various materials of construction such as various grades of stainless steel, carbon steel and alloy metal. Filter elements can be offered with wedge wire, sintered multi-layer wire mesh, plain wire mesh and sintered metal powder configuration. They are selected based on the requirement of filtration quality. For 100 microns and more, normally it is recommended to use wedge wire element. From 2 microns to 100 microns, it is advisable to use sintered multi-layer wire mesh and plain wire mesh, depending upon the application requirement. For final filtration of 0.2 microns to 5 microns, sintered metal powder is a suitable filter media. Customers can use pneumatically or electrically operated butterfly valve or ball valve as per their process requirement. Normally our systems are equipped with pneumatically operated solenoid valves for back washing and draining. Control panels can be offered with FLP (flame proof) and non-FLP, depending upon the process requirement.
Self Cleaning Filter
Get Price Quote
Radhe self-cleaning filter are available in some standard models to choose from for different flow rate also designed & fabricated as pre requirement. Size manufactured is up to 6” NB and below and filtration achieved is down to 40 micron. Element of this type can be cleaned by rotation one outside handle or knob. The dirt over the surface of element is brushed down by scraper blade & collected at bottom and can be drain out. Automatic self-cleaning filters are manufactured with assembly of motor & gear to rotate the filters element for continuous cleaning. The element of this type has very high mechanical strength and can with stand a very high differential pressure & ease of cleaning element are some special feature. This type of filter is suitable for most liquid fluid with suitable material of construction. Features: High durability Optimum efficiency Long functional life
Self Cleaning Filter
Get Price Quote
We are offering self cleaning filter. Filter concept inc. Offering a wide range of self cleaning filter in india.
High Pressure Self Cleaning Filter
Get Price Quote
High Pressure Self Cleaning Filter, single filter, Multi-Basket Single Filter
Self Cleaning Filter
Get Price Quote
Filter, Filter Air Bag
Self Cleaning Filter
Get Price Quote
FABRICATION, Pipes, Tube Heat Exchanger, Trolleys, Hoist, Filter, Pump
Automatic Self Cleaning Filter
Get Price Quote
Our Strainer is a self-cleaning strainer for continuous straining of liquids in closed systems.Our Strainer removes debris from natural water sources such as sea water or river water. It can also be used to remove particles in process liquids. There are two types of Self cleaning filters are available. 1) Scrapper Mechanism Type:- With Automated Control System monitoring the Strainer operation,cleaning is accomplished by an internal Scrapper Mechanism. When cartridge gap gets plugged up by impurities and the differential pressure reaches its pre-set value. Then PLC inspects the signal and sends out the indication. The gear motor drives the scraper and the particles or agglomerates are skimmed from the surface, thereby keeping the function of cartridge well and keeping the cartridge gap clean.When the impurities at the bottom of the filter increases, the drain valve opens up and the impurities are emptied successfully, which makes the system pressure achieve normality. Because of well-set position and optimum scraping angle, the rotational scraper drains off the impurities from the filter with the help of the gear motor. This avoids the burden of taking apart the cartridge and washing it, which results into successful filtration of the medium.The scraper system contains stator, PTFE scraper and spring, which are designed for automatic cleaning, and especially for the reasonable spring pressure, maximally reducing the cartridge’s abrasion.2) Disc Type :- With Automated Control System monitoring the Strainer operation, cleaning is accomplished by a disc. This is operated by pneumatic cylinder. When cartridge gap gets plugged up by impurities and the differential pressure reaches its pre-set value. Then PLC inspects the signal and sends out the indication. A spring-loaded cleaning disc moves up and down inside the filter screen and removes collected contaminants. The filtrate flows from top to bottom, and from inside of the screen to outside. The contaminants that are collected on the screen are easily removed and evacuated to the collection chamber. On the down stroke, any remaining contaminants are driven downwards to the collection chamber while on the upstroke, the cleaning disc removes contaminants from the screen surface.
Hydra
Get Price Quote
Hydra, Crawler Crane, jcb, tower crane repair, Forklift, Generator