Self Priming Pump Dealers in Amraiwadi, Ahmedabad

• Material: CI
• Model: JSMP SERIES
• Motor: 2 HP
• Head: UPTO 10 METER
• Brand: JIKSAN
• Max Flow Rate: UPTO 1200 LPM
• Phase: 3 Phase

Graded casting & EN - 8 / SS 316 / SS - 410 Shaft increase service life. Minimum need for inspection and maintenance because greased for life, external lubrication. Drive options of electric motor, coupled or belt drive versions or by Petrol / Diesel engine. Perfect sealing assured by high quality mechanical seal which can not run dry because of in-pump oil reservoir.       MATERIAL OF CONSTRUCTION       Impeller : Cast Iron / SS - 316, SS - 304 / Bronze or as per request Pump Casing : Cast Iron / SS - 316, SS - 304 Bronze or as per request Shaft : EN - 8 / SS - 316, SS - 304 or as per request Mechanical Seal : Carbon Vs. Ceramic / Tc Vs Tc with NBR / Viton / PTFE       APPLICATION       Effluent treatment, Sewage Plants, Dyes and Intermediate Industries. Dewatering Docks, Ports, Vessels, Swamps, Basements, Trenches, Construction sites, Swimming Pools etc. Pumping petroleum products like L.D.O., Diesel, Petrol, Kerosene etc. Transfer of Chemicals, Solvents, Effluents, Hot Water, Chilled Water, Condensate etc.       DESIGN       Perfect selfpriming action with maximum suction head of 8 meters. Back Pullout design, simplifies inspection and maintenance. Impellers with wider flow passage avoid clogging and can handle solids up to 24 mm diameter. Compact, light weight and yet rugged construction.       RANGE       Capacity : Up 270 m3 /Hr. Suction Head : Up to 8 Mt. Head : Up to 57 Mt. Solids : Up to 24 mm DiaB

Varuna Self Primimng Pumps are manufactured as per IS: 8472. These Self Priming Domestic Pumps are light in weight with rugged construction design and balanced parts which give noiseless operation for a longer duration.

Varuna Self Primimng Pumps are manufactured as per IS: 8472. These Self Priming Domestic Pumps are light in weight with rugged construction design and balanced parts which give noiseless operation for a longer duration. These pumps are available from 0.25 HP to 1.50 HP   Self Priming Pumps Salient Features   The motor body is made from extruded aluminum and cast iron for better heat dissipation. Capacitor starts and runs motor with IP 44 protection. Pre-lubricated double-shielded ball bearings for a longer life. High quality carbon-ceramic mechanical seal for a longer life. The rotating parts of motor and pump are dynamically balanced to ensure minimum noise and vibration. Protective Enclosure – Totally Enclosed Fan Cooled motor (TEFC) type means no dust or moisture. Pump can operate in wide voltage range.   Application   High rise buildings Car washing Hospitals Hotels Domestic water

All Wetted Parts Of Pumps Are Made From Lost Wax Process (investment Casting), So Execellent Surface Finish, Smooth Flow Path/ Hydraulic Passage And No Casting Defects Like Blow Holes, Cracks Etc Centripetal / Regenerative Impeller For Better Suction Pumps Will Be Normally Available In CF-8m (Gun metal, Alloy-20) And Also In Other Material As Per Customer's Requirements. Single / multistage Pumps To Handle Crystal Clear Liquids For High Pressure Duties. Very Quick Priming, No Need Of Foot Valves Very High Suction Capacity Up to  8 Meters Without  Much Noise. Various Types Of Sealing Arrangements As Per Customer's Liquid Characteristics. Normally Fitted With Carbon/ceramic Seal Faces With PTFE Cup And Viton Rubber. Pumps Are Available In Monobloc And In Bare Type, Also With Flameproof Motor. All Motors Are Of "TEFC" Type Pump Can Be Offered With Electropolishing For Some Special Requirements. Able To Handle Temperature Up To 80º C. Trolley mounted available. Also available with 120 Volt / 60 Hz. Custom built pumps available.  

• Head: 35 Mtr
• Pressure: 3.5 kg/cm2
• Capacity: 75 m3/hour
• Pump MOC: CI, SS304, SS316, SS316-L.M.S
• Sealing: Gland Fitted/Sealing Fitted
• Discharge Size: 32 MM TO 80 MM

Salient Features Quick automatic self-priming action, designed for automatic air release duringpriming. Non clogging impeller to handle suspended solids. Repairs possible without disturbing the pipe connections due to back pull out design. No need for foot valve.

mud- self priming centrifugal pump is adequate and automatic in nature. Mud- self priming centrifugal pump is easy to maintain and can be easily repaired at a very low rate. Our mud- self priming centrifugal pump is available at reasonable prices. Mud- self priming centrifugal pump can be installed without any hassle, besides; their spare parts are easily available and replaceable. Our mud- self priming centrifugal pump can also work efficiently during voltage fluctuations. advantages easy to installless maintenanceeasily repairable uses pumping out polluted waterhandling water and light chemicalsprocessing dairy products specifications

• Type: Domestic
• Warranty: 1year
• HP: 0.75
• PHASE: 1 Ph
• SIZE: 25x25
• RPM: 2880
• Approved: ISI

• Motor Horsepower: 1 HP
• Pump Type: Self Priming
• Brand: BHOOMI
• Material: Casting
• Power Source: Electric
• Motor Phase: Single Phase

Application It can be used for Hot Water Transfers, Thermic Fluid Boilers, Hot Oil Transfers, Chemical Industries, Petro Chemical Industries, Jet Dyeing, Refineries, Sugar Mills, Paper & Pulp Industries, Laminate Industries, Seawater desalination plants, etc. Design Back pull-out construction, Horizontal, Foot mounted, Center mounted, Single stage, End suction Top centerline discharge. Operating Data Pump Size – DN 32 to 100 Capacity – up to 100 m3/hr Head – up to 150 m Temperature – up to + 350° C RPM – up to 2900 rpm Material Casing – C.I. Gr., CS, SS 304, SS 316 Impeller – C.I. Gr., CS, SS 304, SS 316 Shaft – EN9, SS 304, SS 316 Shaft Protection Sleeve – MS with Hardcrome, SS 304, SS 316 Gland Stuffing Box – C.I. Gr., CS, SS 304, SS 316 Bearing housing – C.I. Gr.

• MOTOR KW HP: 1.50
• PIPE SIZE IN MM Suc. x Del.: 40X40

Mud Pump Excellent quick automatic action without foot valve up to 8 mtrs. Back pull out design, so easy maintainance without disturbing pipe lines. Better efficiency because of good hydraulic design. Less expensive & easily available spares.

• Type: Self Priming Mud Pump (with Mech. Seal fitted)
• Capacity: up to 75 m/hr
• Head: up to 35 mtr
• Pressure: up to 5 kg/cm2
• Speed: up to 2900 rpm
• Temperature: up to 100° C
• Suction Head: up to 7.5 mtr
• Size: 32 mm to 75 mm
• Solid Hand Size: up to 25 mm
• Viscisiy: up to 100mm/Sec.
• M.O.C.: CI, CS, SS304 / 316, SS 304 L/316L, Alloy 20, Hast alloy B or C,CD4MCU, etc

  SELF PRIMING MUDDY WATER PUMP MODEL HP RPM PUMP SIZE TOTAL HEAD IN MTRS / DISCHARGE IN LPM 6 8 12 15 18 19 20 22 24 26 28 30 34 SP-0 1.00 2850 40X40 312 270 204 66                   SP-1 2.00 2850 40X40     336 264 162 108 48             SP-2 3.00 2850 50X50     480 276 378 354 312 234 150         SP-3A 5.00 2850 80X80 1182 1152 1068 972 858 822 762 660 552 426       SP-3 7.50 2850 80X80             912 894 858 798 708 594 300 SP-3L 5.00 1450 80X80             588 540 486 420 360 306   SP-4LA 10.0 1450 100X100     2040   1560   1320             SP-4L 12.5 1450 100X100     2400   1740   1680   1560 960  

We are offering monoblock mud pump. 1 h.p,single phase ,three phase,40 x 40 mm size ,2880 r.p.m,self priming monoblock pump.

• Material: Cast Iron
• Color: Blue
• Motor Horsepower: 3 HP
• Pump Type: Mud Pump
• Head: 35 meter
• Discharge Pressure: 11 kg/cm2
• Max Flow Rate: 0.8 Lpm

Item Code: NRVLeveraging on the competence of an efficient workforce, we are capable of providing our clients with a superlative range of Self-Priming Pumps (NRV - 0.5HP). The unique quality of our pumps is that these use air-water mixture to reach a fully-primed pumping condition. These pumps are highly demanded in the market owing to features like causing no clogging and optimal efficiency.Application areas: HotelsClubsFlats BungalowsHospitalsDairies Gardens

Self Priming Non Clog Pump, Volute Centrifugal Pump, Rotary Gear Pump

Open well Submersible Pump, Dewatering Pump, Domestic Water Pumps

Self Priming Mud Pump

3 Oil Filled Submersible Pumpset, Centrifugal Monoblock Pump, column pipe

Self Priming Monoblock Pumps, Pump Sets, V6 Submersible Pump

mini monoblock self priming pump, Borewell Submersible Pumpsets

self priming, submersibles pumps, Monoset Pumps, mono block pumps, Pumps