Self Priming Pump Dealers in Bapu Nagar, Ahmedabad

Backed by the team of professionals we are able to offer you a quality centrifugal mud pump. These centrifugal mud pump are manufactured by considering IS: 8034 standards and BIS standards. Centrifugal mud pump are also known as sand pumps or mud pumps. Having the great design these pumps are convenient for purpose of engine driving pump. Our centrifugal mud pump are mainly known for its sturdy construction. More over for its error free and noise less working they are highly demanded in the market both domestic and international.     Features: Long life service Noiseless operation Less maintenance needed No foot valve required No priming of suction pipeline Suitable for motor Non-clogging impeller Applications: Dewatering mud Industrial pumping of petroleum products Industries Municipalities Public health department

• Warranty: 1 year
• Country of Origin: india
• Brand: Chetak

self primining monoblock pumps are mostly used for pumping water.

• Color: Blue
• Voltage: 230/415
• Country of Origin: Made in India
• Motor Horsepower: 0.5 HP
• Pump Type: Centrifugal Pump
• Material: Steel
• Discharge Pressure: 6 lpm
• Power Source: Electric
• Motor Phase: Single Phase
• Frequency: 50HZ
• Maximum Discharge Flow: 50 lpm
• Usage/Application: Resident/Industrial
• Speed: 2800 RPM

Our Self Priming Pumps are fueled by a completely encased fan cooled, AC acceptance Motor, finish nonappearance of suction inconvenience, appropriate for extended periods obligation. The motor stator is made of low watt misfortune steel covers gathered underweight with unbendingly in the casing. All around adjusted rotor guarantees vibration and clamor free operations. The varnish impregnated windings made of enameled copper wire offer fantastic protection control. Shaft made out of best quality steel, accuracy ground of adequate size, which serves to transmit the evaluated Horsepower. All single-stage forms up to 1.0 HP are fused with Thermal Overload defender. Use of Regenerative self-priming monoblock pumps is in Hospitals, Watercourse frameworks, Water supply frameworks of Gardening, Nurseries, Domestic water supply, Multi-story Building, and Industries.

• Material: USHA
• Brand: USHA
• Usage/Application: DIRTY WATER LIFTING
• Head: 7-15 m
• Size: 1",2"
• Phase Type: "SINGLE OR THREE PHASE
• Motor Type: SUBMERSIBLE

• Brand Name: Chemshire
• Driven Type: Electric
• Condition: New
• Power: 10hp, 1hp, 2hp, 3hp, 5hp, 7hp
• Certification: CE Certified
• Type: Self Priming Pumps
• Country of Origin: India
• Capacity: 60 M3/hour
• Head: Up To 35mtr
• Discharge Size: 20 mm to 150 mm
• Pump MOC: CI, SS304, SS,316
• Sealing: Mechanical Seal Fitted

• Country of Origin: India
• Motor Horsepower: 1 HP
• Motor Phase: Single Phase
• Motor Speed: 1400-2800 RPM
• Class Of Insulation: Class F
• Ambient Temperature: 50 Degree C
• Voltage: 220-240 V

• Type: Self Priming Mud Pump (with Mech. Seal fitted)
• Capacity: up to 75 m/hr
• Head: up to 35 mtr
• Pressure: up to 5 kg/cm2
• Speed: up to 2900 rpm
• Temperature: up to 100° C
• Suction Head: up to 7.5 mtr
• Size: 32 mm to 75 mm
• Solid Hand Size: up to 25 mm
• Viscisiy: up to 100mm/Sec.
• M.O.C.: CI, CS, SS304 / 316, SS 304 L/316L, Alloy 20, Hast alloy B or C,CD4MCU, etc

• Power ( H.P.): 0.5 / 1
• Version: SP, 240 volts, 2880 RPM, 50Hz, AC Supply
• Discharge Range (LPM): 15 LPM - 60 LPM
• Head Range (Meters): 6 - 36 Mtrs.
• Pipe Size (MM): 25 X 25

Product features    High performance in terms of discharge as conventional Self priming and minimonoset Pumps.  Self priming up to 8.0 meters at mean sea level.  Optimally designed for higher efficiency in wide range of operation.  Fitted with thermal Overload Protector (T.O.P).  Totally enclosed fan cooled (TEFC) motor to prevent entry of dust & moisture.  Centrifugal Impeller with adequate clearance.  Unique Motor Design-cap Start & Run (PSC Motor) avoiding centrifugal switch.  Suitable for wide voltage operation - 160 to 240 V.   Applications Use for water supplies to: Residential Bungalows & Hotels Storage water tanks Small farms Lawns & Gardens   Technical Data

• Head: up to 35 mtrs.
• Capacity: up to 75 LPS
• Solid Size: 40 mm
• Drive: Engine / Motor

Application : Where self priming action is required. Marine : Pumping water from docks, ports, vessels. Industrial : Pumping petroleum products, Chemicals. effluents ash-water, tiles & marbles, filter press etc. Civil construction : Dewatering foundations, trenches and pits. Mobile Machinery : Cooling water for marine engines and solvents. Public utilities : Sewage Pumping.

Flow rate up to 90 l/min (5.4 m³/h)Dynamic head up to 40 m.   APPLICATION   • clean liquids without abrasives, which are non-aggressive for the pump materials.• water supply.• As pressure boosting pumps for central water systems.• civil ad industrial applications.• watering gardens.• irrigation.   FEATURES   Other voltages.Available in three phase.Special mechanical seal.Higher liquid or ambient temperatures.Available in 60 Hz.

Application It can be used for Hot Water Transfers, Thermic Fluid Boilers, Hot Oil Transfers, Chemical Industries, Petro Chemical Industries, Jet Dyeing, Refineries, Sugar Mills, Paper & Pulp Industries, Laminate Industries, Seawater desalination plants, etc. Design Back pull-out construction, Horizontal, Foot mounted, Center mounted, Single stage, End suction Top centerline discharge. Operating Data Pump Size – DN 32 to 100 Capacity – up to 100 m3/hr Head – up to 150 m Temperature – up to + 350° C RPM – up to 2900 rpm Material Casing – C.I. Gr., CS, SS 304, SS 316 Impeller – C.I. Gr., CS, SS 304, SS 316 Shaft – EN9, SS 304, SS 316 Shaft Protection Sleeve – MS with Hardcrome, SS 304, SS 316 Gland Stuffing Box – C.I. Gr., CS, SS 304, SS 316 Bearing housing – C.I. Gr.

• Motor Horsepower: 1 HP
• Pump Type: Self Priming
• Brand: BHOOMI
• Material: Casting
• Power Source: Electric
• Motor Phase: Single Phase

• Type: Domestic
• Warranty: 1year
• HP: 0.5
• Phase: 1 Ph
• Size: 25x25
• RPM: 2880

Special Features Excellent quick automatic action without foot valve up to 8 mtrs. Auto suction lift upto 18 feet. Automatic air release during priming. Back pull out design, so easy maintainance without disturbing pipe lines. Dynamically balanced rotating parts ensure less vibrations. Better efficiency because of good hydraulic design. Minimum parts, fast repairing at low cost, Also pump is available at economical rate. Available in Bare, Coupled, Monobloc, Belt driven version. Also offered pump with trolley / trailer to move it from one place to another. Less expensive & easily available spares. Available in gland & mechanical seal as per customer's requirements. simple construction, only two moving parts. Easy inspection of impeller. Large diameter of solids handled . up to 50 mm. High resistance. to abrasive liquids the wear plate is easily replaced and impeller are also available in s.s. Alloy 20, Polypropeline etc Easy to install :- only the suction hose is immersed in the liquid, The pump can be set up high and dry in the most convenient position for inspection and maintenance. Long Life :- The parts subject to wear can be easily replaced one or more times to restore the original performance. Application Public utilities :- For pumping muddy water, sewage, polluted liquids, solid and in swimming pool. Dewatering Basements, Trenches, Construction sites. Onboard shift, as bildge, for desk wash & engine cooling. Tiles & Marble factories, effluent plants. Mobile Machinery : Cooling water for marine engines and shovels. Any application where priming is to be avoided. Industry : Transfer of clean or dirty neutral, acid or alkali liquids containing sand, mud or solids in suspension; clean or dirty low viscosity petroleum product or solvents; milk of lime, caustic soda; washing, cooling, circulation; smoke scrubbing; emergency duty. Civil engineering : Flood drainage; sewage pumping; fire fighting; recovery of dangerous liquids. Naval duty :- Loading and unloading; bilge pumping; washing, fire fighting, stripping, sanitary duty and circulation. Waste treatment : Pumping polluted, hot or corrosive waster water containing sand, mud or solids in suspension; dosing neutralising liquids; pumping out settled sludge. Construction industry : Dewatering excavation, canals or ponds; ground water dewatering with wellpoint system or drains; water supply from wells or canals; hosing down concrete castings. Agriculture : Surface irrigation; liquid manure oxygenation; transfer and spraying liquid manure or fertilisers, distribution of liquid animal feed; transfer of must; washing. Typical Application Liquid containing sand mud or solids in suspension with pH from 5-13, smoke scrubbing; water emulsion for machine tools or grinders, cutting or quenching fluid circulation, cooling water circulation in steel mills or drawing mills; neutralising liquid dosage, pumping out settled sludge, sump pumping liquid manure transfer and circilation Water circulation in paint spray booths; stripping fuel tanks circulation Recovery of dirty solvents Transfer of light petroleum product such as diesel fuel, paraffin, kerosene and petrol (gasoline) Liquid fertiliser transfer, circulation and spraying, brackish or sea water containing sand Brackish or sea water washing, cooling or fire fighting in ports; auxiliary duties on board Marine duty; brine, sea intake and circulation of sea water in swimming pools Pumping out acid waster, transfer, of dilute acids; fruit juice or fluid food products Recovery of spills from chemical plant; transfer or circulation of caustic soda or potash At Drilling Rigs Note : Special Pumps for Higher Capacity and Head available on request. Material Of Construction CASING : CAST IRON / SS-304 (CF-8) SS-316 (CF-8M) IMPELLER : CAST IRON / CF-8 / CF-8M / BRONZE DIFFUSER : CAST IRON / CF-8 CF-8M /BRONZE S SHAFT : EN-8 / SS-304 / SS -316 SLEEVE : SS-410 / SS-304 / SS-316 / BRONZE BEARING HOUSING : CAST IRON SEALING : TIWA /CARBON - CERAMIC SEAL / TC-TC SEAL

• Type: Self Priming Monoblock Pump
• Application: Water
• Weight: 10-20kg, 20-300kg, 30-40kg, 40-50kg
• Color: Brown, Grey, Light White, White
• Condition: New, Used
• Automatic Grade: Manual
• Power: 10hp, 1hp, 2hp, 3hp, 5hp, 7hp
• Driven Type: Electric
• Warranty: 1year, 2years
• Motor Phase: Single Phase, Double Phase , Three Phase

We are offering monoblock mud pump. 1 h.p,single phase ,three phase,40 x 40 mm size ,2880 r.p.m,self priming monoblock pump.

Item Code: NRVLeveraging on the competence of an efficient workforce, we are capable of providing our clients with a superlative range of Self-Priming Pumps (NRV - 0.5HP). The unique quality of our pumps is that these use air-water mixture to reach a fully-primed pumping condition. These pumps are highly demanded in the market owing to features like causing no clogging and optimal efficiency.Application areas: HotelsClubsFlats BungalowsHospitalsDairies Gardens

Mud Pumps

Self Priming Peripheral Pump, Beverage pump, Cast-Iron Centrifugal Pump

Mud Pump, Open well Submersible Pump, Dewatering Pump, Industrial Pump

Mud Pumps, Boiler Tube, Hydraulic & Boiler Tubes, Heat Exchanger Tubes

Self Priming Pumps, 3 Oil Filled Submersible Pumpset, column pipe

Self Priming Mud Pump, PVC Sheathed Flexible Cable, Flat Cables

self priming, mono block, Open Well Pumps

Self Priming Pump, Single Phase AC Electric Motor

self priming, submersibles pumps, Monoset Pumps, mono block pumps, Pumps