Self Priming Pump Dealers in Hathijan, Ahmedabad

• Type of Installation: Stationary
• Maximum Flow Rate: 266 m³/h
• Minimum Flow Rate: 17 m³/h
• Maximum Head: 34 m
• Minimum Head: 6 m
• Speed of Rotation: 3500/ 2900 / 1400 / 950 Revolutions/min
• Maximum Discharge-side Pressure: 3 Bar
• Type of Bearing: Ball Bearings
• Drive Frequency: 50 Hz / 60 Hz
• Type of Drive: Electric Motor
• Type of Lubrication: Grease Lubrication
• Max. Permissible Fluid Temperature: 140 °C
• Nozzle Position: End Suction
• Suction Characteristics: Self Priming
• Impeller Material: SS 316 / High chrome / SS 304 / SS 410/ Graded CI / Ni Hard
• Type of Impeller: Semi Open
• Shaft Material: EN-9 / SS 304 / SS 410 / SS 316

• Material: Steel
• Color: Blue
• Brand: SMS
• Motor Horsepower: 3-26 Hp
• Pump Type: Centrifugal Pump

• Color: Blue
• Material: SS
• Condition: New
• Automatic Grade: Automatic
• Application: Industrial
• Capacity: 60 LPH to 6000 LPH

• Material: CI
• Model: JSMP SERIES
• Motor: 2 HP
• Head: UPTO 10 METER
• Brand: JIKSAN
• Max Flow Rate: UPTO 1200 LPM
• Phase: 3 Phase

Crafted to perfection by our expert designer, this spm pump meets all the necessary pumping requirements of our clients. Material of construction :impellercast iron / ss-316, ss-304 / bronze or as per request casingcast iron / ss-316, ss-304 / bronze or as per requestshaft / sleeveen-8 / ss-316, ss-304 or as per request.

Our JET Pumps are designed to meet the requirement of a good acid handling pump. Available in a range of three Models, developed with a main objective of attaining higher levels of corrosion resistance durability & interchangeability. Our JET Pumps are designed to meet the requirement of a good acid handling pump. JET Rubberlined Pumps are simple and reliable & bear a wealth of experience in design & manufacture. Our Pump Body & its Rubber Lined Parts are restricting the contact of corrosive liquid. Our Pump is available as a 3H.P. & 5H.P. & 7.5H.P. with minimum 2000 ltr/hr. capacity & working up to maximum 40 ltr/hr. “JET” PUMPS FEATURES : Less Expensive & Most ideal pumps than other Pumps like as a P.P./ S.S. Pumps. No requirement of foundation so easy to installation. No layout design cost due to standard dimensions. Easy servicing of damaged parts like as a bearing, impeller, & casing. Having maximum lift up solid particles due to open type Impeller. Pumps sat on heavy duty iron Channel Frame. Pump catalog diagram & Part specification to be added from catalog

HES(X)-JE(X) Self Priming Motor Driven ‘Jet’ Pumps in AISI 304 Self priming motor driven AISI 304 stainless steel pumps particularly suitable for supplying drinking water, domestic water boosting, small-scale garden watering, draining tanks and swimming pool and handling clean water in general. Technical Specifications ·         Maximum working pressure : 6 bar ·         Maximum liquid temperature  :  45oC ·         Maximum suction depth : 8m ·         Capacity up to 4.5 m3/hr   ·         Total Head up to 49 m  

We are engaged in supplying & exporting a broad range of Self Priming Mud Pump, Mud Pumps in India that offer high performance, smooth functioning and long durability. Our products are fabricated with the aid of high quality material & components. They are made employing the latest techniques and methodology in accordance to the industrial norms under the guidance of the skilled & experienced team of professionals. The producers of our pumps maintain their quality right from the procurement of the raw-material till their dispatch; hence they have incredibly favorable features like excellent corrosion resistance, high effectiveness, easy installation, least maintenance etc. Our quality control department austerely checks the quality of the products before delivering them to the clients to ensure their perfection. We are the principal Mud Pumps supplier & supply them to major cities of India such asGudur, Adyar, Nagpur, Ahmednagar,Ahmedabad, Surat, Vadodara, Rajkot, Jamnagar, Bhavnagar, Junagadh, Gandhinagar Surendranagar, Kutch, Junagadh, Navsari, Bharuch, Anand, Porbandar, Panchmahal, Bhavnagar, Patan and Ankleshwar etc.   Sewage Mud Pump :- Our sewage pumps are fabricated as per the design of the experts keeping in mind the international standards of quality. Hence they offer high functionality smoothly for long periods of time.   Features: Compact designing No requirement for foot valve Automatic air discharge while priming Effortless maintenance without dismantling the pipelines Minimal vibrations during functioning Excellent hydraulic design Uncomplicated examination of impeller feasible Easy & robust construction Excellent resistance to abrasive & corrosive fluids Easy to install 100% leakage free Easy accessibility to the Spares parts Ability to tolerate wide voltage fluctuations Provided with Anti-rotation impeller unlocking system Appliation:   Domestic water pumping applications    Miscellaneous Industrial pumping & transferring application dealing with contaminated/ polluted corrosive, abrasive, acid or alkali liquids such as Effluent and sewage treatment plant Slurry Material pumping Steel Plant Petroleum Industries Petrochemical Industries Chemical Industries Thermal energy Plant Ceramic industries Technical Specifications 0.5 HP to 20HP 500 – 60,000 LPH Base shaft is EN8 Accessible with open as well as closed impellers Can be fitted to  all standard motors Apt for handling extremely corrosive liquids Self priming  up to 5 meter Rotatable universal flange provided

• Type: Jet Pump
• Voltage: HIGH
• Warranty: 1 yr
• Brand: VARUNA
• Motor Power: HIGH
• Motor Phase: Single Phase
• Material: DURABLE
• I Deal In: New Only
• Head(m): 6.0-39.0 Mtrs
• Capacity: 1800 to 420 LPH
• Voltage Range: 160V-240V
• Bore well size: 50 to 125 mm
• features: Easy installation & operation, High quality carbon-ceramic mechanical seal for long life

The self-priming pump is a pump which uses air-water mixture so as to reach a fully-primed pumping condition. It overcomes the problem of air binding through the process of mixing air with water in order to create a fluid with the pumping properties which are much like that of regular water. It then gets rid of the air and moves only water like any other normal pump. We at Active Seals are the Self Priming Pump Suppliers. We make the product available to everyone who needs it at a price which is reasonable enough. The product is of high quality and works efficiently.   Not only are we the suppliers for this product but we are also the Self Priming Pump Manufacturers. We manufacture various types of this product for the sludge type media application to be done. The product is also manufactured and made available in all types of alloy grades. We manufacture the SG type Self Priming non clog pumps and make it available in a wide range for the customers to choose from. The pumps manufactured by us are very durable, save energy and is installed with excellent thermal features. We believe in advancement and thus we make use of the advanced manufacturing facilities to manufacture our products. The pumps made at our company have turned out to be very efficient for the rain water disposal and the also the sewage treatment plant. The pumps are well-made to handle the mud and the slushy water. The Self Priming Pump of our company is available with enhanced features. All types of negative and positive suction working is possible with these pumps and are available in various M.O.C. like C.I. Bronze, Gun Metal, Stainless Steel and various other alloys too. The maximum solid hand size is up to 25 mm with head up to 35 Mtr. The capacity of the pump is 75m3/hour with the suction head of up to 7.5 Mtr. The sealing types used are Mechanical Seal and Gland. The pump can be used for dewatering swamps, Trenches and basements, Swimming pools, Marine application, Effluent Treatment Plants, Transfer of lubricants like Petrol, Diesel, Spirits, Gas Oils, Kerosene and many more. We not only operate at the local level but also at the national and inter-national level. Active Seals is in fact a leading Self Priming Pump supplier with its customers in various countries. We provide with highly efficient and good quality products which are the best that you can get at the available price range.

Varuna Self Primimng Pumps are manufactured as per IS: 8472. These Self Priming Domestic Pumps are light in weight with rugged construction design and balanced parts which give noiseless operation for a longer duration.

Our clients can avail a quality range of Self Priming Centrifugal Pump Set from us. All these self priming centrifugal pump set are developed at our sophisticated manufacturing unit, in compliance with the established norms and standards of the industry. These self priming centrifugal pump set are offered at market leading price. APPLICATION: Effuent Treatment, Sewage Plants, Dyes and Intermediates. Dewatering Docks, Ports, Vessels, Swamps, Basements, Trenches, Construction Sites, Swimming Pools etc. Pumping Petroeum Products Like L.D.O., Diesel, Petrol.Kerosene etc. Transfer Of Chemicals, Solvents, Effluents, Hot Water, Chilled Water, Condensate Sites etc. Features: Graded Casting & EN-8 / SS 316 Shaft Increase Service Life Minimum Need For Inspection And Maintenance Because Greased for Life, external lubrication. Drive Options Of electric Motor, Coupled Or Belt Drive Versions Or By Petrol / Diesel Engine. Perfect Sealing Assured By High Quality mechanical Seal Which Can Not Run Dry Because of in-pump Oil Reservoir Design: Perfect Selfpriming Action With Maximum Section Head Of 8 Meters. Back Pullout Design, Simpllifies Inspection and Maintenance. Impellers With Wider Flow Passage Avoid Clogging And Can Handle Solids Up To 24 mm Diameter. Compact, Light Weight And Yet Rugged Construction. Material Of Construction: IMPELLER  :    Cast iron / SS - 316, SS - 304 / Bronze or as per request PUMP CASING  :    Cast iron / SS - 316, SS - 304 / Bronze or as per request SHAFT  :    EN - 8 / SS - 316, SS- 304 or as per Request MECHANICAL SEAL  :    Carbon Vs Ceramic / Tc Vs With NBR / Viton / PTFE Range: Capacity  :    Up 75 m3 / Hr.     Suction Head : Up to 7.5 Mt Head  :    Up 35 Mt.     Solids : Up to 24 mm Dia

For technical and sanitary reasons, sewer jetting pump equipment are frequently cleaned. Particularly, the blocking of the cross sections as well as odour problems need to be avoided. Also, damages at the channel walls must be recognized very early, which is only possible, if the walls are completely clean. Further, inorganic deposits that reduce the sewage treatment efficiency must be removed. Sewer jetting / drain jetting / gutter cleaning is the process of using sewer jetting pump equipment to bring a sewer drain line back to like-new condition without having to actually replace the line. This is very cost-effective practice, as well as a nearly effortless task- especially for drain jetting that are heavily used, even for grease. (You aren't supposed to be dumping that down there in the first place!). Anyone, who has ever had to deal with a sewer or even residential septic tank, knows all about clogs and back-ups. Soap scum residue, grease, hair, food, mineral deposits and more can all cause a drain to back up. As much as people try to be careful with what they send down the tube, it is almost inevitable that these things will at some time pass through eventually causing clogs. Even as careful as you are with grease- you may not directly dump it down the drain- but the remaining grease on pots, pans and plates can cause a film that over the years can build up and solidify. Sometimes a simple unclogging could do but after masses of build-up and too frequent blockages, perhaps a good sewer jetting would be a more effective method that will also last plenty longer. Pressure Jet's high pressure drain jetting pump equipment, drain jetting are completely suitable to achieve all above cleaning results, because these pumps are rugged in construction, have medium speed and perform to the entire satisfaction of the customer. There are special sewer jetting pump equipment , designed specifically for this purpose, called sewer jetting. They can clean the pipes leading from sinks and bathtubs leading to the tanks, even those at long distances, which is especially helpful in the case of industrial piping. The sewer jetting work at a high pressure, between 150-300 bar and 12-400 lpm. The pressure can be adjusted throughout the job as needed. These sewer jetting pump equipment use a special nozzle that gets down into the drains to loosen and cuts the clogged materials that are obstructing the pathways. This essentially scours the pipes clean and then washes the debris back up to be removed, usually through a vacuum pump. These kinds of systems are successfully running in different municipal corporations.   APPLICATIONS OF WET SANDBLASTING EQUIPMENT 2" - 6" pipe lines use 1/4" size drain jetting hose 5" - 10" pipe lines use 3/8" size sewer cleaning hose 8" - 12" pipe lines use ½" size sewer jetting hose 10" or larger pipe lines use ¾" size sewer blasting hose. Important Accessories for sewer jetting system

• Type: Self Priming Pumps
• Application: Oil, Water
• Weight: 10-20kg, 20-300kg, 30-40kg, 40-50kg
• Color: Brown, Grey, Light White, White
• Condition: New, Used
• Automatic Grade: Manual
• Power: 10hp, 1hp, 2hp, 3hp, 5hp, 7hp
• Driven Type: Electric
• Warranty: 1year, 2years

• Max.temperature: 200°C
• Size: 1/4″ to 3/4″ BSP (8 Different sizes)
• Brand Name: Maruti
• Fluid Viscosity: 2.5 Cst to 450 Cst
• Range: 0.5 to 40 LPM at 1500 RPM
• Pressure: 3 Kg/ Cm² TO 35 Kg/Cm²
• Port Size: 1/2″Suction x 1/2″ Delivery 1/4″ by-pass

Owing to the expertise in this domain, the Maruti Engineering Works are listed among the leading manufacturer and exporter of LDO Burner Pump. The product is being manufactured by utilizing advanced technologies and machines, best quality grade raw material. In order to ensure the uniform quality, the completed product is strictly tested by a series of quality check parameters. Even after following the international industrial guidelines, we do not allow the product for packaging without proper QC. The LDO Burner Pumps are utilized in an oil burner, force feed lubrication, and boilers. SPECIFICATIONS Available from 30 LPH to 2500 LPH capacity In different input & output port sizes from 3/8″ to 1″ inch (BSP) Low power consumption APPLICATION Oil Burner, Boilers Force Feed Lubrication Bitumen Tank Burner Liquid to be handle: FO/LDO/LSHS/Diesel Shaft Seal: Mechanical Seal Unmounted Flanged type with inbuilt pressure regulating valve and provided with external by-pass arrangement

• Material: Stainless steel
• Motor Horsepower: 3 HP
• Motor Phase: Three Phase
• Brand: redix
• Product Type: PUMPS
• Usage/Application: Industrial
• Pump Type: centrifugal
• Head: 5-10 m

• Capacity: Up to 640 M3/hr.
• Head: Up to 55 Mtr.
• Suc. Head: Up to 5 Mtr.
• Discharge Size: 40 mm to 200 mm

Applications:         Dewatering, mud, marine, effluent, hotel, loading & transfer of oils, spirits, swimming pools, gas oils, engine cooling.   Vessels, industrial - pumping petroleum, products, chemical.   Civil construction - dewatering fondations, trenches and pits.   Filter press feeding, ETP, STP, waste water treatment plant.   Mobile machinery - cooling water for marine engines and shovels.   Public utilities - sewage pumping.   Pier, excavation, pits, pot-holes etc., gram panchayats, municipalitie public health department, large housing colonies, industries like chemical,   pharmaceuticals, food, cement, paper, sugar, salt, steel an other for liquid cargo from freigther, barges.

  SELF PRIMING MUDDY WATER PUMP MODEL HP RPM PUMP SIZE TOTAL HEAD IN MTRS / DISCHARGE IN LPM 6 8 12 15 18 19 20 22 24 26 28 30 34 SP-0 1.00 2850 40X40 312 270 204 66                   SP-1 2.00 2850 40X40     336 264 162 108 48             SP-2 3.00 2850 50X50     480 276 378 354 312 234 150         SP-3A 5.00 2850 80X80 1182 1152 1068 972 858 822 762 660 552 426       SP-3 7.50 2850 80X80             912 894 858 798 708 594 300 SP-3L 5.00 1450 80X80             588 540 486 420 360 306   SP-4LA 10.0 1450 100X100     2040   1560   1320             SP-4L 12.5 1450 100X100     2400   1740   1680   1560 960  

• Material: Cast Iron
• Color: Blue
• Motor Horsepower: 3 HP
• Pump Type: Mud Pump
• Head: 35 meter
• Discharge Pressure: 11 kg/cm2
• Max Flow Rate: 0.8 Lpm

Varuna Self Primimng Pumps are manufactured as per IS: 8472. These Self Priming Domestic Pumps are light in weight with rugged construction design and balanced parts which give noiseless operation for a longer duration. These pumps are available from 0.25 HP to 1.50 HP   Self Priming Pumps Salient Features   The motor body is made from extruded aluminum and cast iron for better heat dissipation. Capacitor starts and runs motor with IP 44 protection. Pre-lubricated double-shielded ball bearings for a longer life. High quality carbon-ceramic mechanical seal for a longer life. The rotating parts of motor and pump are dynamically balanced to ensure minimum noise and vibration. Protective Enclosure – Totally Enclosed Fan Cooled motor (TEFC) type means no dust or moisture. Pump can operate in wide voltage range.   Application   High rise buildings Car washing Hospitals Hotels Domestic water

high pressure water jet pump, Triplex Plunger Pumps, crude oil transfer pump

Self Priming Non Clog Pump, Industrial Pumps

Self Priming Pump, Flexible Coupling, tyre coupling type kt

Selfpriming Mud Pump HM Series, Ecco Submersible Drainage Pump 2PED Series

water jet cleaning pump, Chemical Dosing Pumps, Dosing System

Self Priming Pumps, pump parts, Monoset Pumps, Monoblock Pumps, Motor

Centrifugal Jet Pumps, Submersible pumps, booster pumps, Sewage Pumps