Sensors Dealers in Ahmedabad

• Material: Mild Steel
• Condition: New
• Application: Industrial Use
• Type: Pressure Sensors
• Country of Origin: India
• Brand Name: Torque
• Working: 20 amp
• Model Name/Number: 1089057578

• Brand Name: Kelvin
• Material: Stainless Steel
• Color: Grey
• Power Source: Electric
• Application: Industrial
• Length: 2.5mtr
• Country of Origin: India
• Tenmperature: 0 to 1300 deg C

• Color: Black
• Application: Industrial Use, Laboratory
• Country of Origin: Thailand
• Operating Temperature Range: -4° C to 80° C
• PH Range: 0-14 pH
• Type of PH Meter: Portable

• Country of Origin: China
• Type: Passive Infrared Sensor
• Voltage: 220VAC
• Frequency: 50Hz
• Driven Type: Electric
• Warranty: 3 Years

Vedanta Infratech offers wide range of Smart Sensors. This product has a good detector for motion, and an integrated circuit, SMT. It provides automation, convenience, safety and energy-efficiency. The wide detection field is covered by detectors. Diameter (mm) 115 Projection (mm) 58 Material Polycarbonate Colour of fitting white Class 2 Primary Voltage 230 IP Rating IP20 Pir Sensor YES Warranty Years 1 Construction PC Finish white Earth Terminal N Voltage 230 IP Rating IP20 Wall Mount PIR Motion Sensor Dealers Suppliers In Ahmedabad  

• Material: Mild Steel
• Condition: New
• Power: Electric
• Application: Static Application Use
• Feature: Accurate Results, Durable, Excellent Performance, Fine Finished, High Quality
• Type: Differential Pressure Transducers
• Country of Origin: India

  Differential pressure transducers, while similar to standard pressure transmitters, focus on measuring the difference in pressure between two points in a fluid or gas system. They don't provide absolute pressure readings but rather the variation between two pressures. Here's a breakdown of their typical specifications:   General Specifications · Differential Pressure Range: This specifies the range of pressure difference the transducer can measure (e.g., ±100 Pa, -10 to +10 bar). · Accuracy: Expressed as a percentage of full scale (%FS) similar to standard transmitters. Typical accuracy for good quality models is ±0.5%FS to ±2%FS. · Output Signal: The most common output signal is a 4-20mA current loop, but 0-5V or 0-10V voltage outputs can also be found. · Supply Voltage: The voltage required to power the transducer (typically 24VDC). ·  Performance Specifications · Temperature Limits: The operating temperature range the transducer can withstand. · Static Pressure Rating: The maximum pressure each individual input port can handle without damage (important because differential transducers have two pressure inputs). This can be higher than the differential pressure range. · Proof Pressure: The maximum overall pressure the transducer can withstand without permanent damage (typically 1.5 to 2 times the upper limit of the differential pressure range). · Burst Pressure: The pressure that will cause catastrophic failure (typically 4 times the upper limit of the differential pressure range). · Response Time: The time it takes for the output to respond to a change in pressure difference (usually in milliseconds). Environmental Specifications · Ingress Protection (IP rating): Similar to other transmitters, this rating indicates the level of protection against dust and water ingress (e.g., IP65 for dust tight and water jets). · Material of Construction: The materials used in wetted parts (those coming into contact with the process fluid) are crucial. Common materials include stainless steel, Hastelloy C, and Monel.  Additional Features · Media Compatibility: The type of fluids or gases the transducer is compatible with, considering factors like corrosiveness. · Communication Protocol (Optional): Some advanced models offer communication protocols like HART for remote configuration and diagnostics. · Display (Optional): Some transducers may have a built-in display for local pressure difference reading. · Calibration: Calibration is necessary to ensure accuracy. Some models offer features like zero and span adjustments for easier calibration. Factors to Consider When Selecting a Differential Pressure Transducer · Process Connections: The type of fitting used for connecting the transducer to the two pressure points (e.g., NPT, flange). · Electrical Connections: The type of electrical connector for power and output signal. · Fluid Compatibility: Ensure the materials and media compatibility specifications match the fluids in your application. By understanding these differential pressure transducer specifications and additional factors, you can select a suitable model for your specific application that requires measuring pressure differences in liquids or gases.

• Material: Stainless Steel
• Application: Air Flow Indication,Industrial
• Feature: Superior Finish, Sturdy Construction, Proper Working, Four Times Stronger
• Type: Air Flow Sensor
• Country of Origin: India
• Flow Rate: 3-100 cm/s (liquid) / 200-3000 cm/s (gas)

We promise to make delivery on time, as we have a wide spread network of logistic service providers and dealers. We make sure the products we offer are as per national as well as international quality standards, reliable and worth every penny spent by buyer.

• Operating Temperature: 0..+50 °C
• Storage Temperature: -20..+80 °C
• Dimensions: 109 mm (W) x 67.5 mm (D) x 34 mm (H)
• Housing Material: Aluminium
• Weight: 0.16 kg (interface without accessories), 1.02 kg (case, incl. contents)
• Make: Honsberg
• Conformity: CE
• USB: USB jack type B

Details : Can be used on site for : Parameter modification Firmware update Adjustment of inputs and outputs Can be connected via USB Characteristics : The ECI-3 configuration interface enables connection of GHM HONSBERG sensors to the USB port of a computer. All sensors of the OMNI, FLEX, and LABO families, as well as other sensors which contain a microcontroller are supported. Both 2-wire and 3-wire sensors are supported. In combination with the 'HI-Tools' Windows software, it enables The modification of all the sensor's configuration settings The reading of measured values The adjustment of inputs and outputs Firmware updates Commissioning : The configuration interface is intended for temporary connection to the application. Permanent installation in the system is not intended. The interface is initially connected to the USB port of the computer using the supplied USB cable. The power supply of the interface takes place via the USB port. Additional auxiliary voltage is not necessary at first. The drivers required for operation are provided on the supplied USB stick and are installed in the usual manner. Connection of the sensors takes place at the 'Sensor' port with the supplied M12x1 extension cable. The supplied adapter can be used for connection of sensors with a valve connector. No additional connections are necessary for operation with 2-wire sensors. The supply of sensors and interface takes place from the USB port. Scope of delivery : ECI-3 configuration interface 1.8 m USB cable 500 mm M12x1 extension Valve connector adapter Adapter K04-05 SUB stick with driver software Carry case A mains connector is not included in the scope of delivery.

• Material: ABS Plastic
• Protection Degree: IEIEC-IP67
• Switching Frequency: 5kHz
• Connection Type: Axial cable
• Standard Distance: 0.6 mm
• Supply Type: Bulk

We are offering vibration transmitter sensor etc. rupraj technical services bring forth the highly reliable vibration transmitter sensor. We are a credible supplier of vibration transmitter and sensor all around india. Process plants that depend on rotating machinery have recognized that high vibrations are the most obvious indicator of a machine’s condition. By installing continuous vibration measuring devices like vibration transmitter sensor provides optimized plant uptime, maximized productivity and reduced maintenance costs. Apart from these efficiencies, our vibration transmitter sensor also ensures environmental benefit. recognizing these advantages, indian industry over the past 10 years has seen an upsurge in the number of installed on-line vibration measurement channels. In parallel with productivity gains, plant load factors have progressively risen, especially in the power sector. On average 4 channels or vibration test points per machine train are connected to a continuous monitoring system that, in most plants, is managed from the dcs (distributed control system).