STP & ETP Equipments Dealers in Paldi, Ahmedabad

A mechanical stirring device in which a suitably mounted induction motor will have a vertical shaft having speed of 6000 to 8000 revolutions per minute when loaded. The shaft will be equipped with a replaceable stirring paddle of either of the types and made of metal. The surface will be of such length that the stirring paddle will operate not less than 20 mm and not more than 35 mm above the bottom of the dispersion cup. The dispersion cup will be supported on a rest and shall have a removable baffle. A special dispersion cup conforming to either of the designs shown in IS 2720 (Part IV) 1985 will be provided to hold the sample while it is dispersed. The stirrer will be free from vibration whilst operation and the base will be made of M.S. of at least size 20 cm X 25 cm with rubber cushions. The container and baffle will be of such material as not be affected by the reagents like sodium Carbonate, Sodium silicate , Sodium Hexametaphosphate etc. The stirrings device will be suitable for operation on 230-250 Volts A C with controller switch for different revolution. It will be provided with 3 core wiring of with off-on switch on side. The dimensions of stirring paddles for stirring apparatus and dispersion cup will be as per IS 2720(Part IV)1985

( New improved model with variable system and DC motor to work on 220 volt AC.) The apparatus consists of an evaporating flask rotated by non-sparking electric motor in heating water bath. The drive unit is clamped in V shaped heavy duty stand. The introduction tube permits continuous feed of the liquids into evaporating flask and also distillation under controlled atmosphere. The evaporating flask is pear shaped to give a large surface area for evaporation, clamped to a glass duct which goes through the drive unit and produced into the condenser is fitted with B-19 joint through which introduction tube is inserted. The condenser spherical join S-35 at the bottom of the condenser to receiver flasks cap, 1 litre of corning glass With ball point socket. Complete units is fitted on 'v' shape heavy duty stand with quick jack action. Waterbath and vacuum pump at extra cost.

• Application: Chemical industries, Pharmaceuticals Industries, Metal Industries, Food Industries, Oil Plants etc.
• Thickness: approx 1 mm
• Cloth Type: PP, polyester, nylon
• Brand Name: MECHTECH
• Square Plate Size: 12 x 12

Waste Water Treatment Equipment, Herbal Extracts, Enzymes

High Speed Stirrer (AIM 056-1)   Designed as a compact bench-mounted laboratory Stirrer for the pretreatment stage of soils before particle size analysis. The mixer spindle operates within a dispersion cup which can be fitted with an antisplashing baffle to improve the efficiency of mixing.Suitable for operation on 220 V, 50 Hz, single phase, AC Supply.     Application Sedimentation Analysis. Industry Chemical/Process Agricultural Civil Infrastructure Dams & Tunnels Geophysical/ Seismology Testing Geotechnical (soil/ rock) Testing Irrigation Mining Real Estate Roads, Highways & Bridges Education Architecture Building Technology Civil Department Geotechnical Mining Engineering Science Colleges Traffic & Transportation Railways Roads, Highways & Bridges    

water treatment equipments, chlorine tablet

FRP Septic Tank, Water Recycling System, Membrane Diffusers