Sheet Metal Enclosures Dealers in Ahmedabad

High class sheet metal fabricated enclosure for reducing the noise level of DG set & also acts as weather proof housing. Genset will be a integral part of acoustic enclosure and whole construction will be multi-fold sheet channels & ISMC sections. Enclosure construction is fully bolted keeping in view the major service requirements all doors are provided with specially designed hinges and lockable handles, Battery, & Control Panel is housed inside the enclosure, where as Fuel tank, outside the acoustic enclosure.   -> ACCOUSTIC MATERIAL Rock wool in the form of slabs of 50 -100 mm thickness and 64 KG Metres cube density, Compressed along with 4 mm thick vinyl sheet and nonferrous sheet. The 3 mm thick Vinyl sheet is pasted on the inside of the outer wall for anti-draining effect. Non ferrous lead sheet 0.4 mm is sandwiched between Rock wool layers. Specification of Rock wool conforms to IS 8183. Further to increase the life of Acoustic material resin coated fiber glass cloth is provided on exposed surface of Rock wool slabs and the panels are supported by perforated sheets.   -> SURFACE TREATMENT Weather proof and anti-corrosion treatment provided to the entire structure i.e.2 coats of epoxy primer, after sand – blasting followed by 2 coats of epoxy paint of durability, dependability and longer life.   -> VENTILATION IBRATION ISOLATION    # The container is modular construction with the provision to assemble and       dismantle easily.    # The container is fabricated 16 / 18 SWG-CRCA-sheet. The sheet metal components       are pretreated and is P.P. based coated (inside as well outside) for long life. All       nuts and bolts, hardware are Zinc coated.    # Fuel tank provided with breather, drain plugs for draining mobile oil and diesel &       with the level Indicator.    # Fuel to be fitted from outside and has locking arrangement    # Battery is accommodated in the enclosure.    # Doors are gasketed with quality EDPN gaskets to avoid leakage of sound.    # Sound proofing of enclosure is done with high quality rock wool confirming to IS       8183 to suitable thickness and density.    # The rock wool is further covered with fibre glass cloth and perforated power coated       sheets.    # A reactive type residential silencer is provided with in the DG to control exhaust       noise.    # Specially designed attenuators are provided to control sound at air entry to the       enclosure and exit from the enclosure.    # To make the system vibration free, engine and alternator (single bearing) are       mounted on on specially designed anti-vibration pads.    # The enclosure is designed and layout of the equipment is such that there is easy       access to serviceable parts. Acoustic enclosure is designed in such a way that there are no hot pockets around engine and it is provided with suitable designed engine radiator / or additional axial flow fan and does not allow the temperature to rise more than 7 o C., above ambient temperature besides this provision are make in such a way that engine gets combustion air & cooling air within Max.+5 o C of ambient temperature. To achieve optimam output and minimum sound level from the DG set, suitable opening with acoustic hoods are provide for increasing the inflow of air required for combustion & forced ventilation. Air intake and Exhaust fans or single unit velocity Axial flow fans as per the recommendations and engine requirement are provided.    # Fan blade size with speed of 900 – 2800 RPM depending on the requirement.    # Acoustic hoods with noise splitters provided to block and reduce the sound       leakage.    # The sound control system designed to suppress the sound level to 75 db maximum       at 3 metres distance. -> SILENCER Specially designed low noise silencer is provided. Silencer & engine exhaust outlet, Connected with flexible SS below.

Sheet Metal Enclosure, Electric Control Panel, Outdoor Panel Enclosures