Ship Accessories Dealers in Kathwada, Ahmedabad

• End Connection Type: Flanged Ends, Screwed Ends, Socket Weld Ends, Butt Weld Ends, Victaulic Ends, etc.
• Sizes: DN15 to DN600 ( NPS 1/2 to NPS 24)
• Pressure Rating: Class 150, 300, 600, 900, 1500 & 2500
• Design & Manufacturing Standard: BS 1873
• Face to Face Std.: ASME B16.10
• End Connection Std.: ASME B16.5
• Testing Standard: API 598
• Type of Bore: Standard (Full Bore)
• Operated Type: Hand Wheel, Gear Box, Electric Actuator, Bare Shaft, etc.

Globe Valves are Outside Screw, Rising Stem, Bolted Bonnet Construction, threads are away from the line fluid and easy to lubricate. Globe Valves are generally available with Plug Type Disc, which is designed to give leak tight seating over a long period of in built wear life. Globe valves body seat ring is shoulder type, threaded body seat ring which has large taper area that is for ample seating. Two nos. slots are provided on body seat ring, which is for easy removal for servicing at site.  Designed for least possible obstruction to free flow by providing curvature turns in the body thereby minimising stresses & turbulence. The plug & seat-ring are machined and lapped very precisely to get a very tight sealing when valve is closed. Designed and manufactured to the highest standards of quality and, durability. DESIGN FEATURES OF CAST STEEL GLOBE VALVES   Stem nut uses aluminum bronze material. Large valve is provided with thrust bearing to make it opened easily and flexibly. Two-piece design of packing gland to avoid stem clogging caused by squishing. Packing uses flexible graphite for dependable sealing performance. If requested by users, packing spacer ring and greasing mechanism can be available. Back seal design to ensure dependable packing and sealing when valve is fully opened. (Replacement of packing under pressure is not recommended). Lift stem, with a piece of hard stainless steel inlaid between stem head and disc to avoid deformation caused by extrusion, and corrosion leading to inflexibility of disc action. TYPES OF DISC   The seal of Globe Valve is mainly designed to the following two types Conical Seal Flat Seal / Sphere Type TYPES OF VALVES   Angle Type Diverting Type DIN Type

• Size: 1, 2, 4, 6 inch
• Body: Carbon Steel / Stainless steel
• Ind.Wedge: Copper Alloy
• Pressure Class: 200 WOG
• Valve Type: Gate Valve
• Protection: IP 67

Our complete range of products is subjected to stringent quality tests to ensure they are as per norms of international management systems. With us, one can stay completely assured for top-notch quality products that are designed and developed using the premium material and cutting-edge techniques. Also, we ensure that the material is sourced from the reliable places only.

We are the main supplier of this product.

Gear Pumps offered can be made available in different size and configuration choices to suit specific end application needs. Further, these pumps come with large displacement, high pressure and longer service life which make these highly desired and demanded by the customers. Some of its features include high performance gear pumps that provide positive displacement, precision hobbed gear, available in different gear choices like internal gear, external gear, foot mounted internal gear and herringbone gear; expertise in offering customized solutions in terms of size and design among others.   Features: Higher efficiency Sturdy in design Reasonable cost

• Brand Name: Gear Pumps

We are offering gear pumps. In order to cement our reputation in the market, we are engaged in offering an excellent range of rotary gear pumps with the aid of advanced technology. These pumps are extensively used for various industrial purposes. Our offered pumps are available in various specifications and are tested on a series of quality parameters to ensure their perfection in all aspects. Moreover, our clients can avail these pumps from us at market leading prices. Reliable engineers are expertise in manufacturing of rotary gear pumps, design of pump is sturdy and parts are with long life, manufacturers & exporters rotary gear pumps, special features: unidirectional flow designs very high suction lifts & low noise level single piece shaft supported by self lubricating bearings on both end for long life of pump pulsation free continuous flow compact & light weight high volumetric & overall efficiency application: lubricating oils, fuels and all liquids which has lubrication properties emptying barrels and tanks of oils to increase fuel oil pressure for oil burner service and fuel injection pressure pressure lubrication and cooling of bearings, oil circulation through cooler, gear lubricants etc material: body-cl, lobe-sintered iron, shaft-en-8, bush-sintered bronze

• Brand Name: SYSCHEM
• Valve Size: Up to 36 Inch
• Color: Painted
• Specialities: Durable,Compact size,High quality
• Model Name/Number: SYSCHEM
• Material Grade: WCB/ CF8/CF8M/ DUPLEX/ ALLOY
• Design: Bolted Bonnet
• Usage/Application: Water, Steam, Oil & Gas
• Pressure: Up to 2500 Class
• Driving Mode: Hydraulic, Manual, Electric
• Test Pressure: API 598
• Valve Design: API 6D/ API 602/ API 600
• Valve Type: Globe Type
• Working Pressure: Up to 2500 Class
• Type: Flanged End, RTJ, Buttweld

• Brand Name: K-TECH
• Material: CI, CS, SS
• Model Number: GLV

Globe valves are linear motion valves with rounded bodies, from which their name is derived. During the opening of the Globe Valve the fluid flows through the space between the Edge of the Disc & the seat. Globe valves are linear motion valves with rounded bodies from which their name is derived. During the opening of the Globe Valve the fluid flows through the space between the Edge of the Disc & the seat. These kind of valves are generally used in industry as fully open or fully closed valve, but they may be used for throttling as long as fine adjustments are not required. Globe valve are ideal choice to control the gases such as steam. A user can use it for throttling with little modification in plug & seat Being a linear operation, and requiring a low operating force to open, globe valves can be readily actuated for remote operation. Globe valves can be straight through, angle or oblique pattern. the oblique pattern increases the flow coefficient to reduce the pressure drop. When selecting a globe valve, it is important to consider operating temperature and pressure, media properties, flow requirements, duty requirements, physical limitations and suitability for the environment. When installing it is vital to ensure that the valve is positioned so that the flow is from the bottom of the valve to the top.

• Oil Tank Capacity: 5.01 - 13.37 m3/min
• Features: Low Noise,Low-Current Consumption,Vibration free performance
• Motor Power: 0.75 - 300 kW
• Shaft Power: 2.27 - 14.72 kW

• Design Standard: BS 1873/DIN
• INSPECTION & TESTING STANDARD: BS 6755
• Face to Face: AS PER ANSI B 16.10
• End Connection: FLANGED END TO ANSI B 16.5/BS 10 TABLE BUTTWELD END TO ANSI B 16.25
• Operation: HAND WHEEL / GEAR / PNEUMATIC /ELECTRIC ACTUATOR OPERATED

Triplex plunger pumps are low maintenance solutions for high - pressure application such as hydro testing, car washes and jetting application. This pump are excellent for testing leakage and integrity from Boiler, Pressure Vessels, Metal Casting, Gas Cylinder, Pipes & Tubes Part. Pump are supply with different metals like brass, forged stainless steel 304, stainless steel 316, duplex steel, nickel bronze aluminum bronze etc.

We are offering globe valve. Features Design std. as per api 6d,api 600,bs 1414 Face to face as per asme b 16.10 Flange end as per asme b 16.5 Testing std as per api 598, iso 5208 Size 15 to 600 m.m. Seat replaceable Material Body wcb,cf8,cf8m etc Gate ca-15,cf8,cf8m etc Trim 13% cr., ss 304,ss 316 Dimensions 150 # 300 # Size m.m F/f H øWH Wt * F/f H øWH Wt * 15 108 200 76 8 152 200 76 10 20 175 220 89 10 178 220 89 12 25 127 250 102 13 203.2 250 102 17 40 165 305 121 17 228 305 121 22 50 178 375 216 20 216 409 216 30 65 190 455 216 27 241 500 216 45 80 203 472 230 31 282 506 230 60 100 229 577 255 51 305 605 254 95 150 267 808 310 75 403 842 380 150 200 292 978 380 132 419 1030 460 235 250 330 1178 460 205 457 1295 510 330 300 356 1416 510 290 502 1472 560 490 350 381 1566 560 370 762 1659 610 780 400 406 1780 610 500 838 1856 700 985 450 432 2012 700 673 914 2028 700 1280 500 457 2242 700 845 991 2310 800 1828 600 508 2620 800 1250 1143 3060 1100 2500 * Nett. Kg. Aprox (with out any obligation)

Pressure Reducing Valve - BTPR 100: Brightech™ Self-actuating, Internally pilot & piston operated, Globe type, Full lift, Spring & diaphragm actuated, Pressure reducing/regulating valve, also known as Down-Stream Pressure Control Valve.Size Range (BTPR 100 F): 15mm to 150mmPressure Rating (BTPR 100 F): Class 150 & 300Size Range (BTPR 100 T): 15mm to 25mmPressure Rating (BTPR 100 T): Class 150 & 300 Feature & Benefits Brightech™ series BTPR-100, internally pilot & piston operated pressure reducing valves are very compact in design & versatile type for accurate regulation with the widest possible range of flow The full lift type main valve assembly & Globe type body design is capable of delivering very high flow rates with greater accuracy The internally pilot controlled pressure reducing valves are best suitable for use in continuous distribution application The constant outlet pressure (Down stream pressure) is accurately maintained right up to maximum rated discharge capacity of the valve and is unaffected by changes in inlet pressure or flow rate A positive tight shut off ensured by accurate guiding of the pilot & the main valve assembly   Application The Brightech™ Pressure regulator is assembled with stainless steel trims to use for Steam, Air & Gas applications for low and medium pressure range The Non Metallic (Teflon/Elastomer) trims are provided to ensure tight shut off (class VI Leakage) for air & gas application, where as, Stallited Stainless steel trims are provided for High pr

We manufacture Gate Valves of different types. 'Gate Valve' also known as 'Knife Valve' or 'Slide Valve' are linear motion valves in which a flat closure element slides into the flow stream to provide shut-off. Gate Valves and Knife Valves are designed to minimize pressure drop across the valve in the fully opened position and stop the flow of fluid completely. With very handsome prices to offer you for the quality material purchase, we introduce ourselves as the leading manufacturer and exporter of many different kinds of Gate Valves. Applications : Water, Steam, Oil & Chemicals etc.Types : Rising Spindle, Bolted Bonnet TypeSize : 1/2� TO 16�

• Body: ASTM A216 GR WCB / CF8 / CF8M
• Lining: PFA / FEP / PVDF / HDPE / PP
• Lining thickness: 3mm Minimum
• Flange connection: ANSI B16.5,#150 / Customer requirement
• Spark test: 15 KVDC

We are manufacturing wide range of the valves.  

• IP Rating: 240
• Lighting Type: LED
• Light Block Color: RED YELLOW GREEN
• Brand: KESHAR
• Volt: 12 V
• Usage/Application: PANNEL
• Number Of Lights: 3
•  :