Ship Accessories Dealers in Memco, Ahmedabad

Salient Feature Meets design requirement of ASME B 16.34 / API 600 / API603 /API 6D and testing requirement API 598 / BS 6755 / API6FA / ISO 5208 Outside Screw and Yoke Construction Valves provided with back seating arrangement Solid, flexible, split wedge and parallel slide are available Renewable, seal welded seat ring or integral seat ( Cast SS. only ) available. Specially designed die formed graphite packing, controlled clearance between stem, gland and bonnet bushing for guaranteed low emissions meet 100 PPM maximum fugitive emission levels. Anti - friction ball thrust bearing in yoke sleeve for higher size and classes Grub Screw : Secures yoke nut in the bonnet Gress Nipple : Supplies lubricant to the mating parts Flanged End or butt welding end Flanged end dimensions conform to ANSI / ASME B 16.5 / API 605 / DIN / BS 3293 Butt welding end dimensions conform to ANSI / ASME B 16.25 Face to Face and End Dimensions conform to ASME / ANSI B 16.10 / DIN / BS 2080 Bi - directional shut-off. Option Extended bonnet provided for low temperature and cryogenic services (cold box and non cold box applications) to conform to requirement of BS-6364 Deep stuffing box - with lantern ring Self - aligning two piece gland Gear Box / Chain Wheel design available Electric or pneumatic actuator design available Ring joint facings available in higher classes Locking arrangement optional By-Pass, Drain Plug design available Stellited seating hard facing are provided on request Alloy-20, Monel, Hstelloy B & C, CF3 & CF3M Materials on request Application Petrochemical Industries Pharmaceutical Plants Oil Industries Petroleum Refinery Power Plants Thermal & Gas Fertilizers & Agro Chemicals Steel Plant Paper Industries Cement Industries Cryogenic Services

An eminent manufacturer and supplier, we are engaged in offering a high quality range of gear pump. Fabricated using high grade raw material, these are appreciated for handling various types of liquids such as oils, viscous chemicals & food application.

The globe valve is used for throttling flow control.  Shut off is accomplished by moving the disc against the flow stream rather than across it as in the case with a gate valve. The globe valve is an excellent valve to use for on-off service, but is highly suited for frequent cycling and control of fluids anywhere in amount or volume between the open and closed positions. OPERATING PRINCIPLES :- This is a valve which entails multiple turns during hand operation. It is basically a linear action valve that has a piston or disk which seats on a single shaped seat or flat.     They are mainly used to control the opening and closing of fluid flow.In the plumbing industry, globe valves are used to tightly seal when fully closed.This controls high pressure fluid streams in pipes. Fluid pressures vary from time to time while flowing. The valves have a stem that is vertically positioned in the body of fluid flow to control the changes in pressure. It has a globe-shaped body that is mainly separated by an inner baffle. It is the baffle which controls the flow and has two parts: ring shaped seat and the flat plug. we offer metal seatings so that the seating stress must not only high ,but also circumstantially uniform to achieve the desired degree of fluid tightness. SALIENT FEATURES : Body & Bonnet made from high quality casting with liberal sections. The castings are precision machined for high performance Rising Stem & Rising Hand Wheel Construction. Die moulded Graphite (Grafoil) Packing Rings, controlled clearance between stem, gland and bonnet bushing for guaranteed low emissions and also suitable for higher temperature. Deep stuffing box is providing for tightness and maximum long packing life. Swinging Eye Bolts facilitate easy access to the stuffing box. Back seating feature facilitates repacking of the stuffing box on line with the valve in fully open position. Seat Ring Screwed in to the body (Replaceable Type) or integral type. Stellited Disc, Seat Ring & Back Seat can also be offered on special request. Higher Pressure & Higher Size Valves are provided with Thrust Bearings and also with Gear drive arrangements.   SPECIAL OPTIONS :  Angle & Y Type Design Available Parabolic, Regulating, Guided & Soft Seating Disc (Plug) available Extended Bonnet design for low temperature and cryogenic services. Gland Seal Design (Water Seal) With Lantern Ring Non-Rising Hand Wheel on special request Bolted Bonnet / Pressure Seal Bonnet Gear / Pneumatic Cylinder / Electrical Actuator Operated Locking Arrangement With NACE MR 0175 Tailor Made Valve MATERIAL OF CONSTRUCTION:- Cast Iron                                : IS 210 Gr FG 200Cast Carbon Steel               : ASTM A 216 Gr WCBCast Stainless Steel            : ASTM A 351 Gr CF 8/CF 8MForged Carbon Steel          : ASTM A 105Forged Stainless Steel       : ASTM A 182 Gr F304 / F316End Connection                   : Screwed AS PER BSP/BSPT/NPTSocketweld                           : AS PER ANSI B 16.11Flanged                                 : AS PER ANSI B 16.5Pressure Rating              : ASA 125#, 150#, 300#, 600#, 800#, PN 16 & PN 40Engineering Option             : Gear Operated, Electrical Actuated,Size Range                           : 15mm to 300 mm   DESIGN & TESTING INTERNATIONAL STANDARD: Valve Design        : BS 5351 / ANSI B 16.34 / API 6DPressure Testing     : BS 6755-IFace To Face       : ANSI B 16.10Flange Drilling     : ANSI B 16.5 / BS 10 Table / DIN / IS 6392Butt Weld End      : ANSI B 16.25Socket Weld End     : ANSI B 16.11Screwed End        : ANSI B 1.20.1(BSP/NPT)

• Brand Name: VQ
• Material: C.I.; WCB; S.S.304; S.S.316
• Pressure: ND-16; ND-40; 150#; 300#
• Port Size: 25-300

Globe Valve Flange End M.O.C.: C.I.; WCB; S.S.304; S.S.316 Size: 1'' to 12'' Pressure: ND-16; ND-40; 150#; 300#

We manufacture Gate Valves of different types. 'Gate Valve' also known as 'Knife Valve' or 'Slide Valve' are linear motion valves in which a flat closure element slides into the flow stream to provide shut-off. Gate Valves and Knife Valves are designed to minimize pressure drop across the valve in the fully opened position and stop the flow of fluid completely. With very handsome prices to offer you for the quality material purchase, we introduce ourselves as the leading manufacturer and exporter of many different kinds of Gate Valves. Applications : Water, Steam, Oil & Chemicals etc.Types : Rising Spindle, Bolted Bonnet TypeSize : 1/2� TO 16�

• Valve Size: 1/2 Inch
• Material: Stainless Steel,Cast Steel,Stainless Steel, SS 304, SS 316, Duplex,Brass
• End Connection Type: Flanged
• Color: Silver
• Automation Grade: Manual
• Temperature Pressure: Medium Temperature Pressure
• Media: Oil Fitting
• Brand Name: Zebco
• Finishing: Polished
• Certification: API 623
• Packaging Type: Wooden Box
• Country of Origin: India
• Type: Automation, Manual
• Warranty: 12 months

• Type: Diaphragm Valve
• Material: Stainless Steel
• Color: Silver
• Application: Fittings
• Pressure: Medium
• Feature: Accurate dimension, Easy to install, Robust construction

Reckoned for our extensive array of products, we efficiently serve our customers from Ahmedabad(India). We are supported by a reliable team of packaging experts who have immense experience in this domain and capable of catering to the standards and customized packaging requirements.

• Packaging Type: Carton

• Brand Name: SIMEX
• Material: Cast Carbon Steel, CF8, CF8M
• Media: OIL, GAS STEAM, WATER
• Port Size: 1' To 450mm
• Place of Origin: INDIA
• Pressure: ASA 150# & ASA 300#
• Temperature Of Media: 500°F, 800°F

What is the gate valve?? How it works??? What are the applications of it??? Generally the gate valve is designed to start or stop flow, and when a straight-line flow of fluid and minimum flow restriction is needed. In service, these valves generally are either fully open or fully closed. Simex offers the gate valves to meet with the rising demands of industries. This valve has inside a gate that moves up-down perpendicular to the flow of the service. In the up position it will open and closed in the down position. The flow is straight through, and does not lend itself for use as a metering valve. The Gate valve is also available different types of Disc-Gate such as Double Disc Gate, Solid Gate, Flexible Gate, Parallel Slide Gate, Conduit Gate etc.

• Brand Name: CREST
• Material: CS ASTM A 216 GR. WCB

Since 22 years, we are manufacturing gateglobecheckballnrvstrainer valves. We are supply this material in all over the india.

• Color: Silver
• Application: Gas Fitting, Water Fitting
• Feature: Casting Approved
• Size Range: 1 to 8 Inch
• Pressure Class: 150#, 300#, 600#
• Finish: Polished

• Valve Size: Up To 0.25 Inch
• Material: Stainless Steel, PP, Metal
• Media: Steam
• Automation Grade: Semi-Automatic
• Flow Rate: 5 Gpm
• Pressure: Medium Pressure, Low Pressure, High Pressure, 15-50 Psi, 25-75 Psi, 50-125 Psi, 100-250 Psi
• Number Of Way: 2way
• Application: Water Fitting, Oil Fitting, Gas Fitting
• Feature: Non Breakable, Light Weight, Investment Casting, Durable, Casting Approved, Blow-Out-Proof, Anti Dust, Gauge Port, Relief Valve, Check Valve

• Weight: 5Kg, 10kg
• Packaging Type: Wooden Box
• Structure: U Section
• Valve Size: 1inch, 1/2inch
• Voltage Range: 24 V AC
• Brand Name: SRK
• Material: Stainless Steel
• Color: White
• Finishing: Coated
• Diameter (mm): 40 Mm, 50mm
• Overall Length: 6-10 Inch
• Specialities: Non Breakable, Investment Casting, Heat Resistance, Durable, Casting Approved
• Diametre (milimetre): 100 To 1000 Mm
• Type: Industrial Valves
• Condition: New
• Automatic Grade: Manual

• Media: Air, Water, Gas, Fuel, Powder/Solids
• Material: Stainless Steel
• Valve Size: 15 to 50 NB

Body : Robustly designed to withstand stringent duty condition, Smoothly configurated to reduce Turbulance. Long and Accurate Guides : Optionally toleranced for free movement of wedge in flow path and retaining leak tightness even in fluctuating line condition. SuperFinish Seating Faces : High accuracy and superfinish by lapping of body ring and wedge seat faces, guarantee zero leak and reduce operational torque. Deep Stuffing Box : Facilitates extra number of gland packings and ensures pressure tightness and long packing life, can be repacked while valve is back seated. Spindle-Wedge : T-SLOT is housed in the wedge in such a manner to improve transmission efficiency of torque from spindle to wedge and ensure leak tightness. the solid flexible wedges fitted in Gate Valves are Cast Steel having 13% Chrome Welded seat facings, machined with exterme accuracy and finaly ground and lapped to a mirror finish to secure no-leak condition and to minimize the risk of galling. Quality : Committed with dedicarion. Inspection : Third Party Inspection by Lloyds, Bureau Veritas, ABS,UHDE,Bax Council,ElL,PDIL and IBR Etc. are being regularly Carried out against Customer requirements. NOTES FOR GATE VALVE : The standard Body/ Bonnet material is of Cast Steel to ASTM A 216 Gr. WCB. Body-bonnet in grde lcb/c-5/wc-6/ wc-9/cf-8/cf-8m/cf-3/cf-3m ect. trim: 304/316/ Stellite ect. Available to suit Requirements. Yoke will be provided from size 8" and onwards To facilltate operation, all heavy duty valves have Yoke Sleeves fitted with Thrust Ball Bearings. In class 150 and 300 ids, they are provided from Nominal Diameter 14" and onwards. In class 600,900 and 1500 ibs. from 6" and onwards. Pressure sealed bonnet available in higher classes on Request.

We are one of the prominent Globe Valve Manufacturers, Exporters and Suppliers in Gujarat, India. The Globe Valves (cast steel) that we deal in are fabricated from top grade steel varieties at our well-developed manufacturing facility. The entire procedure of producing Globe Valve is supervised by the experts. The high-quality Globe Valves of our can be purchased at reasonable prices. Standard Features Outside Screw and YokeBolted BonnetRising Stem Details Operation : Handwheel, Chainwheel, Electrical Actuator, etcOptional Features : Pressure Sealed Joints, Drain plug and Bypass Arrangement, Flow Regulation Discs, etcSize : From ½� to 16�ANSI Class : #150 to #2500Material : All Grades of Carbon Steels, Stainless Steels and Alloy SteelsEnds : Flanged and Butt-weld Ends Standards Manufacturing Standard : BS1873Pressure-Temperature : ANSI B16.34Face to Face : ANSI B16.10Inspection : API 598 Applications PetroleumPower GenerationChemicalsSteel PlantsFertilizers

• Material: Stainless Steel
• Application: Gas Fitting, Water Fitting
• End Connection: Butt Weld
• Pressure: High, Medium
• Feature: Blow-Out-Proof, Corrosion Proof

Types : Ball Valve, Gate Valve, Check Valve. Needle Valve, Mini Valve. Guage Rott Valve. Globe Valve, Manifolds (2 way, 3way, 4 way)

• Color: Black,Blue,Grey, Brown
• Material: M.S,S.S,Rubber
• Diameter: upto 350
• Usage/Application: Textile,Plastic,Paper Industries
• Brand Name: Anar
• Working temperature: -10 to + 110 Degree C
• Length available: 70 mm- 3000 mm
• Shaft diameter: 35 to 60 mm
• Packaging Details: Standard
• Payment Terms: L/C (Letter of Credit)/T/T (Bank Transfer)

We have developed great series of rubber bow rollers along with expanders and spreader rollers. We have developed broad series of rubber bow rollers with diameter up to 250 mm and width up to 11000 mm.

• Type: Spot Lights
• Shape: Round
• Application: Banquets, Ground, Outdoor, Stadium
• Color: Blue, Green, Orange, Red, White, Yellow
• Power Source: Electric
• Feature: Brightening Look, Durable, Flexible Light, Stable Performance, Suitable For Indoor Or Outdoor
• Light Source: LED

Banana Roller we offer is the best of its kind available in the market. Banana Rollers are extensively in the Textile, Plastic & Paper industries. Fulfilling the needs of various industries, the Banana Rollers have earned huge appreciation from the clients. Banana Rollers are obtainable at market leading prices and in tamper proof packing. Used For : Removing the crease & tightening the Clothes, Plastic & Paper. Specifications Size : 3"Diameter up to 10"Length : 50 mm to 6000 mm

• Usage/Application: Paper Industry, Textile Industry,Lamination Industry, Packaging Industry,Plastic and Film
• Length: upto 6 Mtr.
• Brand Name: Anar
• Color: Black, Blue
• Size: Dia. 75 mm to 250 mm
• Temperature: upto 350 deg. celsius
• Surface Treatment: Rubber Coating
• Capacity: Length Upto 6 Mtr.
• Base Materials: M.S / S.S
• Working Load Limit: upto 3 Tons
• Diameter: 80-250 mm
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

With rich industry experience and knowledge, we are providing an excellent quality range of All types of Fittings.  

• BODY MATERIAL: CAST IRON, CAST CARBON STEEL (ASTM A 216 GR. WCB), FORGED CARBON STEEL (ASTM A 105), CF8 (SS 304), CF8M (SS 316), CF3M (SS 316L), SS 202, ALLOY STEEL & OTHERS.
• DESIGN: RISING SPINDLE, JACKETED, EXTENDED STEM & GEAR OPERATED , PNEUMATIC CYLINDER OPERATED ,
• End Connection: SCREWED, SOCKET WELD, FLANGED END, BUTT WELD END, RTJ.
• PRESSURE RATING CLASS: ASA 150, 300, 600, 800, 900, 1500, 2500, BS 10 TABLE D, E, F, H, ND 16, ND 40.
• Size Range: 15mm TO 400mm

The Globe Valve offered by us is used for regulating flow in a pipeline, consisting of a movable disk-type element and a stationary ring seat in a generally spherical body. Because of their spherical body shapes, these valves are named as Globe Valves. Our range of Globe Valve is widely appreciated by the customers owing to their high quality and durability.   Features - Durable- Highly efficient- Reliable performance- Precision engineered

We are among the leading Manufacturers and Suppliers of Gate Valves. These valves opens by lifting a round or rectangular gate/wedge out of the path of the fluid. The unique feature of a gate valve is the sealing surfaces between the gate and seats are planar. The flanged ends Metal Gate Valves drilled according to pipeline compatible flange dimensional standards.