Shreyas Petroleum Additives Ltd. Vastrapur, Ahmedabad, Gujarat

Due to oxidation of Heat Transfer Fluid Acid Formation in the thermic fluid takes place. This can be identify by measuring Total Acid Number (TAN) of thermic fluid. TAN above 1 is harmful to thermic fluid system as discussed below : Higher TAN thermic fluid increases insoluble ( carbon formation). It starts sticking on the metal surface. It affects heat transfer efficiency of the thermic fluid system. It corrodes metal surface. SigmaTHERM®-AC : Additive exhibits exceptional acid neutralization property for the hydrocarbon structures found in most mineral and heat transfer fluids. It reacts with acid formed in thermic fluid and the same.SigmaTHERM®-AC : additive is ideal to use with heat transfer oils, particularly when they become acidic. It's amazing Powerful Action provides a dramatic reduction in the TOTAL ACID NUMBER ( TAN) of heat transfer media and protects metal from corrosion. It also provides detergency means it cleans metal surface.

Description : SIGMATHERM – K is carefully selected synthetic hydrocarbons. Application : In indirect closed heat transfer system up to 320 º C. For best life it should be used at or below 300 º C for continuous operation. It can also be used for top-up in mineral oil based Thermic fluid system. Benefits: SIGMATHERM – K offers below given advantages. High thermal efficiency. Reduced “ Low Boilers “ and “ High Boilers” Better oxidation stability Lower carbon deposits. Long Life.

Country of Origin : India

Type : Synthetic Thermic Fluid

Shelf Life : 10 years

Color : light yello

Purity : 100%

Appearance : Clear Liquid

Form : Liquid

Packaging Type : Drum

Packaging Size : 210 ltrs

Brand Name : sigma T H E R M - K

Sigma FG - 10 is thermally stable ultra pure Food GradeLubricant. Sigma FG - 10 Food Grade Lubricants are specially formulated with all ingredients meeting requirement. mentioned under chapter 21CFR, 178.3570 of US FDA. Sigma FG- 10 is registered with NSF for H1 grade Lubricants. H1- Incidental Food Contact - Highest safety.

Sigma THERM®-FF - 201 Flushing exhibits exceptional solvency for hydrocarbon structures found in most heat transfer oils either synthetic or mineralorganic heat transfer fluids. It's very cleaning effect, high solvency power, low viscosity and pour point and superior stability make Sigma T H E R M®FF - Flushing Fluid ideal for use with heat transfer oils and other lubricants, particularly when they thermally or oxidatively degraded. Its Powerful Action provides through cleaning entire system from carbon depositions. It reduces viscosity of degraded thermic fluid so that removal of degraded oil is more efficient.

High Temperature Vapor/Liquid phase heat transfer fluid is a thermally stable pure heat transfer fluid which offer you excellent heat transfer capabilities in both liquid and vapour phase up to 400oC. This highly stable heat transfer fluid has an application temperature range of 27ºC to 258oC as a liquid and 258oC to 400oC as a vapour.In addit ion it's cos t-effective High Temperature Vapor/Liquid phase heat transfer fluid is thermally more stable thermic fluid than general thermic fluids available in market. However, w e provide High Temperature Vapor/Liquid phase heat transfer fluid at a price that's designed to make it the ideal choice for your liquid or vapor phase heating systems. High Temperature Vapor/Liquid phase heat transfer fluid also is non-corrosive to metals and is chemically stable. Finally, in keeping with our commitment to the environment, High Temperature Vapor/Liquid phase heat transfer fluid can be fully reprocessed.High Temperature Vapor/Liquid phase heat transfer fluid can also be used for top up / make up for the system containing other similar fluids.

Country of Origin : India

Type : Heat Transfer Fluid

Application : Industrial Lubricant

Feature : Supreme Quality

Condition : New

Form : Liquid

Packaging Size : 220 kgs

Brand Name : Sigma

  Description :   sigmaT H E R M®- S is a synthetic organic heat transfer fluid based on Alkylated aromatic.   Application :   Indirect closed heat transfer systems from - 80 °C to 160  °C in liquid phase without pressurization of system and with proper pressurization up to 300°C   This single fluid is used for challenging requirement of Pharmaceutical, Fine Chemicals and other industries where two different circuits with different fluids are there for cooling and heating purpose.   It replaces traditional duel steam & glycol or steam & brine systems.   Benefits :   ·        Eliminates duel fluids for heating and cooling. ·        Long Life. ·        Cost Effective Solution Trouble free operation

Country of Origin : India

Type : Heat Transfer Fluid

Application : Industrial Lubricant

Feature : Supreme Quality

Condition : New

Form : Liquid

Packaging Type : barrel

Packaging Size : 210 ltrs

Brand Name : sigma T H E R M - S

Sigma THERM® - F is a thermally stable food grade heat transfer fluid. It is recommended up to 320oC bulk oil temperature into closed loop heaqt transfer system.Formulation of Sigma THERM® - F  is based on all ingredients complies with US FDA, chapter 21 CFR, 178.3570.Sigma THERM® - F  is registered with NSF for HT1 grade(Reg. No. 145290) (HT- Heat Transfer, 1 – Incidental Food Contact) – Highest safety.Benefits : High thermal stability High specific heat Very low carbon deposits Low volatility

Country of Origin : India

Type : Heat Transfer Fluid

Application : Industrial Lubricant

Feature : Supreme Quality

Condition : New

Form : Liquid

Packaging Type : Barrel

Packaging Size : 210 Ltrs

Brand Name : Sigma T H E R M - F

SigmaTHERM®-P is a Food Grade Synthetic organic heat transfer fluid.Application :Indirect closed heat transfer systems from -94oC to 160oC in liquid phase without pressurization of system and with proper pressurization up to 230oc.This single fluid is used for challenging requiremetn of Pharamaceutica, fine chemicals and other industries where two different circuits with different fluids are there for cooling and heating purpose.It replaces traditional duel steam & glycol or steam & brine systems.Formulation of sigma THERM®-P is based on all ingredients complies with USFDA, Chapter 21 CFR, 178.3570, HTI Category.Benefits : Eliminates duel fluids for heating and cooling. Long Life. Cost Effective Solution Trouble Free Operation Gasket Material Compatibility :SigmaTHERM®-P has an acceptable compatibility when used within the temperature and pressure limitaion of the following polymers or gasketing materials.Acetal, Aramid Fiber, Chemraz (FFKM), Epoxy Fluorocarbon (FILM), Fluoroelastomer, Glass Fiber, Gylon, Kalrez, PEEK, PTFE, Teflon (All), PTFE Silicon, PTFE Viton, PTFE Fiberglass, Kel-F (CTFE), Viton.

Country of Origin : India

Certification : NSF

Packaging Type : 210 ltr barrel

Sigma THERM®-S is a synthetic organic heat transfer fluid based on Alkylated aromatic.Application : Indirect closed heat transfer systems from - 80oC to 160oC in liquid phase without pressurization of system and with proper pressurization up to 300oC. This single fluid is used for challenging requirement of Pharmaceutical, Fine Chemicals and other industries where two different circuits with different fluids are there for cooling and heating purpose. It replaces traditional duel steam & glycol or steam & brine systems.   Benefits : Eliminates duel fluids for heating and cooling. Long Life. Cost Effective Solution Trouble free operation   Gasket Material Compatibility :sigmaTHERM®-S has an acceptable compatibility when used within the temperature and pressure limitation of the following polymers or gasketing materials :   Acetal, Aramid Fiber, Chemraz (FFKM), Epoxy, Fluorocarbon (FILM), Fluoroelastomer, Glass Fiber, Gylon Style 3500,3504 & 3510, Kalrez, PEEK, Polytetrafluoro-ethylene, Teflon (All), Teflon Encapsulated Silicon, Teflon Encapsulated Viton, Teflon Impregnated Fiberglass, Kel-F (CTE), Viton, Resin Impregnated Carbon Graphite.

SigmaTHERM®-N is a high performance -  synthetic organic heat transfer fluid. It is specially developed for cooling and heating purpose. Has excellent low temperature pumpability and outsta nding thermal stability.   Application : For un pressurized closed heat transfer systems from (- 50)oC to 250oC in liquid phase. Suitable for Single Fluid Heating and Cooling system. It can easily replace usage of water-glycol solution in solar heating and solar power generating system. It is most suitable for Pharmaceu tical companies where very low and high temperature is obtained with the single fluid.

SigmaTHERM®-V is a ultra low temperature heat transfer fluid for Single Fluid Heating and Cooling System.Application : Indirect closed heat transfer systems from - 115oC to 175oC. It has got boiling point of 99oC. For higher operating temperature care should be taken for proper design of system.  It  is  highly  recommended  to  use  Nitrogen Blanketing in expansion tank. Pressure release devices should be provided at appropriate places. Benefits : Eliminates duel fluids for heating and cooling. Long Life. Cost Effective Solution Troublefreeoperatio

Due to oxidation of Heat Transfer Fluid Acid Formation in the thermic fluid takes place. This can be identify by measuring Total Acid Number (TAN) of thermic fluid. TAN above 1 is harmful to thermic fluid system as discussed below : Higher TAN thermic fluid increases insoluble ( carbon formation). It starts sticking on the metal surface. It affects heat transfer efficiency of the thermic fluid system. It corrodes metal surface. SigmaTHERM®-AC : Additive exhibits exceptional acid neutralization property for the hydrocarbon structures found in most mineral and heat transfer fluids. It reacts with acid formed in thermic fluid and the same.SigmaTHERM®-AC : additive is ideal to use with heat transfer oils, particularly when they become acidic. It's amazing Powerful Action provides a dramatic reduction in the TOTAL ACID NUMBER ( TAN) of heat transfer media and protects metal from corrosion. It also provides detergency means it cleans metal surface.

Due to oxidation of Heat Transfer Fluid Acid Formation in the thermic fluid takes place. This can be identify by measuring Total Acid Number (TAN) of thermic fluid. TAN above 1 is harmful to thermic fluid system as discussed below : Higher TAN thermic fluid increases insoluble ( carbon formation). It starts sticking on the metal surface. It affects heat transfer efficiency of the thermic fluid system. It corrodes metal surface. SigmaTHERM®-AC : Additive exhibits exceptional acid neutralization property for the hydrocarbon structures found in most mineral and heat transfer fluids. It reacts with acid formed in thermic fluid and the same.SigmaTHERM®-AC : additive is ideal to use with heat transfer oils, particularly when they become acidic. It's amazing Powerful Action provides a dramatic reduction in the TOTAL ACID NUMBER ( TAN) of heat transfer media and protects metal from corrosion. It also provides detergency means it cleans metal surface.

SigmaTHERM®-V is a ultra low temperature heat transfer fluid for Single Fluid Heating and Cooling System.Application : Indirect closed heat transfer systems from - 115oC to 175oC. It has got boiling point of 99oC. For higher operating temperature care should be taken for proper design of system.  It  is  highly  recommended  to  use  Nitrogen Blanketing in expansion tank. Pressure release devices should be provided at appropriate places. Benefits : Eliminates duel fluids for heating and cooling. Long Life. Cost Effective Solution Troublefreeoperatio

Brand Name : Sigma T H E R M - V

Packing Size : 200 ltrs

Usage/Application : ultra low temperature heat transfer fluid

Packing Type : barrel

Sizes : 200 ltr

Is It Corrosion Resistant : yes