Sieve Shaker Dealers in Paldi, Ahmedabad

This sieve shaker is designed to carry up to 7 sieves of 6 inch or 8 inch diameter. The 12 inch dia.sieves can be used with the help of Adaptor. A 1/4 HP. motor through a reduction gear immersed in oil drives the shaker. The sieve table dies not rotate but is inclined from the vertical axis and the direction of inclination changes progressively in clockwise direction. If the stop-pin below the table is removed. the shaker can have a rotary motion. In addition to this gyratory motion of the table, there is an upward and downward movement ensuring that each square cm of the sieve is utilized. A pair of rods and a holder is supplied. The holder can be fixed on the top of the upper most sieves, and thus the sieve set is firmly held. Suitable for operation on 230 volts, 50 cycles single phase A.C. Supply.Adaptor for 30cm dia test sieves can be fitted in above. For 45CM DIA Sieves: This sieve shaker is designed to carry up to 7 sieves of 18" diameter. The shaker is driven by a 1/2 H.P.Electric Motor through a reduction gear. The sieve table does not rotate but is inclined from the vertical axis and the direction of inclination changes progressively in the clockwise direction, in addition to this gyratory motion of the table, there is and upward and downward movement at a frequency of about 270 vibration per minutes ensuring that each square inch of the sieve is utilised. The whole gear mechanism runs in an oil bath, without test sieves or time switch. Suitable for operation from 220 Volts 50 cycles A.C. supply. Optional Extra: DIGITAL Time switch 0-99 minutes for above MECHANICAL Time switch 0-60 minutes for above

• Application: Cement testing, soil testing, bitumen testing, aggregate testing
• Brand Name: EIE
• Power: Electronic
• Timer: Digital pre-settable timer
• Lead Time: within 4-6 weeks after confirmation of firm order
• Power supply: AC 1 Phase 220V 60/50Hz
• Port: Gujarat, ahmedabad.
• Model Number: EIE 1807(B)
• Usage: Cement Testing Machine
• Supply Ability: 100 Piece/Pieces per Year As Per Buyers Requirement
• Accessories: A pair of rods and a holder
• Exterior body: Powder coated in attractive shakes

• Sieves material: SS 316
• Dimensions: 10’ x 11”x 16” inch
• Net weight: 10 Kgs.

SVS-Vibro Sieve Shaker on the principle of gyratory motion. The vibration can be adjusted by changing the speed. Vibro Sieve Shaker is a circulatory screening attachment widely used for sieving, grading, sizing, screening of a range of solids from Pharmaceuticals, Food, Chemical, Dye, Cosmetic, and Plastic Powder Granules & Particles. Screening. Vibro Sieve Shaker allows for superior and fast separation of particles.

• Power Source: Electric
• Voltage (V): 220 - 380V
• Frequency (Hz): 50Hz
• Motor Power (hp): 2HP

• Power: Electronic
• Brand Name: EIE
• Application: Cement Testing Machine
• Timer: Digital pre-settable timer
• Shaking motion: Gyratory/Rotap motion
• Accessories: A pair of rods and a holder
• Exterior body: Powder coated in attractive shakes
• Motor power: 1/4 HP
• Timing range: 0 to 99 Minutes

Motorised Sieve Shaker (AIM 054-1)   To make the process of sieving easier and quicker, electrically operated mechanical Sieve Shakers are offered for dry sieving. The mechanical Sieve Shakers effect a more elaborate and standardised sieving action to produce accurate results and eliminate personal errors involved in manual sieving. On the basis of experience gained in the production of these sieve shakers for more than thirty years, considerable improvement has been made in the design and performance of these units. These Sieve Shakers are popularly used not only in soil laboratories but also in a number of industries where sieving is required; such as for ores, refractory materials, minor aggregates, pigments, powdered coal, soap, cement, roofing materials, plastic moulding powders and pharmaceuticals.The new design is compact and light weight and can bemounted on a bench top. This eliminates the use of concrete foundation. Noise has been reduced considerably in the new model. A digital timer adjustable from 0-99 minutes is incorporated as an integral part of the equipment.The Sieve Shaker can carry upto 8 sieves of 20cm dia. It is driven by a ¼ HP geared motor. The Sieve Table is inclined from the vertical axis and the direction of inclination changes progressively in the clockwise direction. In addition to the gyratory motion of the table, there is a tapping motion as well.Suitable for operation on 220 V, 50 Hz, Single Phase,AC supply.   Application Particle size distribution Industry Chemical/Process Agricultural Civil Infrastructure Dams & Tunnels Geophysical/ Seismology Testing Geotechnical (soil/ rock) Testing Irrigation Mining Real Estate Roads, Highways & Bridges Education Architecture Building Technology Civil Department Geotechnical Mining Engineering Science Colleges Traffic & Transportation Railways Roads, Highways & Bridges  

Gyratory Sieve Shaker, Safety Footwear Leakproof Tester, Conditioning Chamber

Gyratory Sieve Shaker, Colour Matching Cabinet, Toxicity Tester