Single Phase Pump Dealers in Ahmedabad

• H.P: 3.0 HP TO 200.0 H.P.
• Head: Up to 90 Mtrs.
• Capacity: Up to 11,000 LPM,
• RPM: 3000 / 1500,
• Stage: One / Two,
• Concentration: Up to 10,000 PPM.

Polder pumps are particularly suitable for lifting water from canals and river beds, dam sites, disposal of waste water. The construction of the pump is of pump below, and motor above type and suction inlet is at the bottom, so that water is pumped from the lowest level. The pump is driven by water filled submersible electric motor, squirrel cage induction type, water which acts as a lubricated against the contamination from surrounding water by mechanical seal. All parts are made from especially selected material to suit high abrasion and corrosion the pump can be installed in vertical pump easily shifted to alternative site for reinstallation and withdrawal of the unit as well as replacement of normal wearing parts on site with minimum labor. Polder pump is one or two stage, available in all material except that soft metal. Such as lead or metal so hard as not to be readily machinable. Dewatering pumps is a compact designed pump below the motor by which maximum lowest pumping level is possible. Unit consist of a vertical conventional centrifugal pump driven by an electro oil lubricated, oil filled / dry submersible motor. There is a common shaft between pumps and motor the pumping & motor unit is of close coupled construction and the double casing design provides with the help of double mechanical seals make up of tungsten carbide which is protected and covered by leap seals. Double sealing arrangement keeps motor away from the liquid being pumped and high grade corrosion resistance & abrasion resistance material is being used. all material used are eco-friendly. Impeller is closed / non clog type able to handle solid contents and are dynamically balanced. The bearing arrangement with double angular contact withdeep groove ball bearing give the resistance to the radial and thrust load combination in a pump.   APPLICATION Dam / Construction sites, Dewatering Mines, Sea Water Pumping, Oil Mixed water, Intake Wells / Sump Wells, Canals, Turbine water, River Beds, Ash mixed water, Cement / Steel Plants, Thermal power Station.

• Brand Name: Jasco Pump
• Product Name: Polder submersible pump
• Size: Up to 20 mm
• Condition: Good
• Place Of Origin: Ahmedabad,Gujrat
• Min. Order Quantity: As per client requirement

We offer polder submersible pump jasco polder submersible pumps are robust & sturdy in construction , computer aided design allows most compact & efficient pump to give optimum output at minimum power input. It is designed for continuous operation, no pump house is required, suction being at bottom, can draw water to the lowest level. Special anti corrosive process is carried out to wetted parts for longer life. Jasco polder submersible pump is driven by wet type, water filled & water cooled motor, suitable for 3 phase, 415 v, 50 hz a.c. Supply. The flow of water is passed between motor body & jacket, keeps motor cool. Mixed flow impeller is mounted on extended motor shaft. The motor is protected from raw water by mechanical seals of adequate size & combination of material as per application. Stator & rotor are vacuum impregnated with heavy duty thermal varnish. Impeller & rotor assembly are dynamically balanced for vibration free & noiseless operation. Stationary parts like discharge outlet, bye pass. Bowl, suction case, housings etc are of graded c.i. Casting and jackets & motor body, are hydraulically tested, shaft shall be s.s., impeller shall be ci bronze s.s or any material required by client. Protecting sleeve shall be s.s., bearing bush shall be leaded tin bronze. Motor will have pvc. Coated wire winding, thrust bearing will be graphite s.s. Plate duly ground & lapped. Application : 1. Drainage from river bed 2. Lift irrigation from canals. 3. Storm water pumping. 4. Industrial water supply 5. Dewatering of mines & collieries 6. Water supply schemes. Technical specification : head : up to 150 mtrs. Capacity : 2000 cu.m.hr stage : 1 or 2 solid handling size : up to 20 mm speed : 96014502900 rpm.

• Maximum Head: 110 m
• Minimum Head: 5 m
• Installation Position: Vertical/Horrizontal
• Shaft Seal Type: Mechanical seal
• Maximum Drive Rating: 186 kW / 250 HP
• Type of Installation: Stationary
• Maximum Flow Rate: 1500 m³/h
• Minimum Flow Rate: 20 m³/h
• Speed of Rotation: 2900/ 1400 / 950 revolutions/min
• Free Passage (solid Handeling): 20 mm
• Type of Bearing: Bush Bearings
• Drive Frequency: 50 Hz / 60 Hz

• Motor Horse Power: 0.1- 1 HP
• Power Source: Electric
• Motor Phase: Single Phase
• Material: SS
• Country of Origin: Made in India
• Warranty: 1 Year
• Brand: Barelwala
• Use: Domestic
• Automation Grade: Automatic
• Rotor Material: Copper

• Power Source: Electric
• Maximum Discharge Flow: 100 - 500 LPM
• Brand Name: INDOTECH
• Power: 1.5K.W.
• Maximum Head: 25 M
• Phase: Two Phase
• Model Name/Number: Ft265S
• Motor Type: 2.0H.P
• Features: Dynamically balance rotor and impellers delivers optimal efficiency,Designed to operate in fluctuating voltage conditions,Simple design for easy servicing,Inbuilt thermal overload protector,Models available with extended shaft,Conform to IS-9079

• Country of Origin: Made in India
• Model Name/Number: MDH, MDL & VIRAT Series
• Brand: LUBI
• Phase: Single Phase

We are primarily engaged in Manufacturing and Exporting in the market Submersible Polder Pump which is in high demand owing to its durability, robust structure, easy operation and low maintenance cost. Submersible Polder Pump can be obtained from us at rock bottom price in secured packing.

• Voltage: 415 v
• Brand Name: denim
• discharge range: 100 lpm to 1200 lpm
• total head range: 15 mtrs to 40 mtrs
• Minimum Order Quantity: 10 Piece

• Automatic Grade: Manual
• Warranty: 1year
• Application: Industrial
• Advantage: Easy to Operate
• Performance: Optimum
• Speciality: Rust resistance

Salient Features Submerge in water permanently, so no need of separate cabin Priming is not require It also works on Low Voltage Noiseless and Vibration free operation Supplied with foot valve

• Head: up to 150 Mtrs.
• Capacity: 2000 cu.m./Hr
• stage: 1 or 2
• Speed: 960/1450/2900 rpm
• HP: Up to 250 HP
• Solid handling size: up to 20 mm

Application Drainage from River bed Lift irrigation from canals. Storm water pumping. Industrial water supply Dewatering of Mines & collieries Water supply schemes

The MBH PD Series raw water pumps are robust, portable submersible pumps with a vertical discharge port. These are excellent replacements for Vertical turbine pumps. They eliminate the need of Pump houses, and can be directly installed at the source on a pontoon or inside a jack well. Available with motors from 7.5 kw to 180 kW, they are designed to handle raw water from the jack wells, Transfer of water directly from the rivers or canals. The pumps are based on the technology of water lubricated Thrust bearings, which reduces the maintenance of the pump. Being centreline discharge pumps, motor cooling is not an issue and water from low lying areas can be easily utilised.

• Port: mundra
• Power: Electric
• Application: Submersible
• Fuel: Diesel
• Brand Name: JASCO
• Place of Origin: Gujarat, India
• Lead Time: 30 days
• Usage: Water
• Packaging Details: international standards.
• Pressure: High Pressure

• Capacity: upto 1500 cu.mtr./hr.
• HP: 1.5 to 250

MBH Polder pumps are portable pumping units which have pump below and motor above construction. These are powered by squirrel cage induction motor suitable for 400440 Volts, 3 phase, 50 Hz, AC supply which is totally enclosed. The motor windings are water and oil resistant and ingress of water or moisture inside the motor due to seal failure or other reason will not render the pump inoperative. The pump motor unit of close coupled construction and the double casing design provides effective water cooling of the motor by flowing water around the motor casing. The motor is sealed by special mechanical seal so that the pumping water does not enter the motor chamber and damage the motor. All parts are made from specially selected material and processed to ensure long life under arduous operating condition.

These pumps can withstand voltage fluctuations from 180-240 volts. These have dynamically balanced rotating parts to ensure minimum vibrations. Cast iron impeller, delivery casing, these pumps are suitable for gardening and small farm irrigation, agriculture for clear water handling, water supply for agriculture, used in apartments, buildings and hotels. High speed monoblock pump, Flatter efficiency curves for efficient operation, Designed for automatic air release during priming.

• AGRICULTURE &SUBMERSIBLE PUMP: MORE
• Packaging Details: FULLY WOODEN PACKED
• Lead Time: 5 -10 DAYS
• Port: MUNDRA

• Features: Model UGP
• Head in mm: 60mm

Polder Submersible Pumps Water Cooled & Water Lubricated. Applications: Lift Irrigation, Mines & Collieries application, Dam Sites, Canal Sites.

• Motor Horse Power: 1 HP
• Voltage: 220 V
• Frequency: 50 Hz
• Motor Phase: Single Phase
• Brand: Vishava

• Motor Horse Power: 0.1 - 1 HP
• Power Source: Electric
• Motor Phase: Single Phase
• Type Of End Use: Industrial
• Country of Origin: Made in India
• Brand: Lubi

• Motor Horse Power: AS PER CLIENT REQUIREMENT - REFER CATALOG
• Brand Name: PEC PUMPS
• Model No.: PSF
• Usage/Application: SEWAGE / MUDDY WATER TRANSFER
• Stages: Single Stage
• Pump Type: SELF PRIMING 

polder submersible pump, Dewatering Submersible Pump, Submersible Pump