SKF Bearing Dealers in Mirzapur, Ahmedabad

Taper roller bearings use conical rollers that run on conical races. Most roller bearings only take radial loads, but tapered roller bearings support both radial and axial loads, and generally can carry higher loads than ball bearings due to greater contact area. Taper roller bearings are used, for example, as the wheel bearings of most cars, trucks, buses, and so on. The downsides to this bearing is that due to manufacturing complexities, tapered roller bearings are usually more expensive than ball bearings; and additionally under heavy loads the tapered roller is like a wedge and bearing loads tend to try to eject the roller; the force from the collar which keeps the roller in the bearing adds to bearing friction compared to ball bearings. Tapered Roller Bearings consist of two main units. A cup and a cone. The cup is on the outer race whereas the cone consists of the inner race. The tapered rollers are guided by the high load on the inner race.   These bearings are capable of carrying both the radial and axial loads and permit fine adjustment for end play.    

• Material: Chrome Steel
• Finishing: Chrome Finish

• Color: Silver
• Bore Size: 10-60 mm
• Type: Roller
• Lubrication: Oil, grease
• Feature: High precision
• Hardness: 58-63 HRC

With our modern transportation amenities, safe and on-time deliveries are rendered by us! Not just designing and manufacturing, but we make sure that the packaging of the products is also given the priority. Our packaging experts make use of quality packaging material to deliver the product undamaged.

Our company is known in offering a comprehensive array of Industrial Bearings. These are recognized for their high load capacity and corrosion resistance. Our products are preferred in cycle industry as these are durable as compared to case hardened balls. These products have the advantage of being through hardened and are cheaper than the products made of high carbon chrome alloy steels Features  Capability to bear high loadCorrosion resistantHigh tensile strength

• Material: Mild Steel
• Shape: Round
• Number of Row: Single Row
• Grade: 304
• Finish: Polished
• Rust Resistance: Yes

Having a definite quality management system, we are regarded as the noteworthy manufacturer, trader and supplier of an extensive gamut of Ball Bearing. Used in different industrial machines, the offered range is meticulously tested on various quality parameters by our experts. We take pleasure to introduce ourselves as one of the renowned firms, offering high quality gamut of Ball Bearing. This bearing is manufactured by our deft professionals using the best quality material and ultra-modern technology at vendors’ end. Obtainable in different specifications, this bearing is broadly acknowledged in the automobile industry for its various indispensable features. Clients can buy this bearing from us at nominal prices. Features  Easy installation High durability Anti-corrosive Durable Dimensionally accurate

• Bearing Number: 1200-2320
• Bore Size: 9- 73 mm
• Brand: KYK
• Inner Diameter: 10- 100 mm
• Outer Diameter: 30- 215 mm
• Dynamic Load: 5.55- 187 kN
• Static Load: 1.19- 79 kN
• Mass: 0.033- 11.600 kg

• Features: Precisely engineered, Durability, Accurate dimension

• Brand Name: Dev
• Bearing Number: 208
• Weight: 1.52 Kg
• Application: Industrial
• Material: Cast Iron
• Inner Diameter: 40 mm

• Material: CHROME STEEL
• Packaging Type: BOX
• Brand: IKO, INA, SKF
• Corrosion Resistant: CORROSION FREE
• Feature: LUBRICATION FREE
• Model Name/Number: GE ES, GE ES 2RS
• Seal Type: OPEN AND CLOSED

The inner and outer ring raceways are segments of cones and the rollers are also made with a taper so that the conical surfaces of the raceways and the roller axes if projected, would all meet at a common point on the main axis of the bearing. This conical geometry is used as it gives a larger contact patch, which permits greater loads to be carried than with spherical (ball) bearings, while the geometry means that the tangential speeds of the surfaces of each of the rollers are the same as their raceways along the whole length of the contact patch and no differential scrubbing occurs. When a roller slides rather than rolls, it can generate wear at the roller-to-race interface, i.e. the differences in surface speeds creates a scrubbing action. Wear will degenerate the close tolerances normally held in the bearing and can lead to other problems. Much closer to pure rolling can be achieved in a tapered roller bearing and this avoids rapid wear. The rollers are guided by a flange on the inner ring. This stops the rollers from sliding out at high speed due to their momentum.

Deep groove ball bearings mainly take radial load as well as take moderate axial load With less coefficient of friction ,high limiting speed, large size range and variations of structure, they are suitable for precision instruments in common machinery ,as a widely used type of bearings in ,machinery industrial.

• Material: Metal
• Color: Metal
• Condition: New
• Bearings Type: Roller
• Seal Type: Open

Ball Bearing, which we offer, is produced as per the set industrial standards. We are ranked among the renowned Suppliers of the Ball Bearing from Ahmedabad- Gujarat. Dimensional exactness and long life are the highlights of the Ball Bearing, which we offer. These Ball Bearings can be purchased from us at competitive prices. We Offer Small BearingPlain Spherical BearingsSpherical BearingsPedestal Bearings

• Bearing Number: 32205
• Type: Roller Bearing
• Shape: bearing
• Material: Chrome Steel
• Type of Bearing: tapper roller bearing
• Brand: ZKL
• Size: roller bearing

• Material: Stainless Steel
• Application: Automobile
• Color: Grey, Solver
• Feature: High Dimensional Accuracy, Honing Raceways, Long Life
• Bore Size: 0.6mm, 18mm, 2.5mm, 30mm
• Outside Diameter: 7 - 28 mm,
• Surface Finishing: Powder Coated

Tapered roller bearings have tapered inner and outer ring raceways and tapered rollers. They are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads. The projection lines of the raceways meet at a common point on the bearing axis (fig. 1) to provide true rolling and low friction. The axial load carrying capacity of tapered roller bearings increases with increasing contact angle α. The size of the angle is related to the calculation factor e (→ product tables): the larger the value of e, the larger the contact angle. A single row tapered roller bearing is typically adjusted against a second tapered roller bearing.

• MODEL: PHS/POS/LHSA
• Size: 4 to 50MM

We deal in all types of ball bearings and are authorised dealer of NBC ball bearings. We cater to the market demands of Gujarat, Rajasthan and punjab. NBC is birlas company and has a huge market in India. We also keep other brands of ball bearings and can fulfill any types of demand in it.

Pvc Product, spare parts for vehicles, Piston, Sleeves, struts