Slump Test Apparatus Dealers in Ahmedabad

• Type: Lump Test Apparatus
• Material: Mild Steel, Stainless Steel
• Certification: ISO 9001:2008
• Application: Lump Testing
• Color: Brown, Grey, Light White, Off White, Silver, White
• Condition: New
• Phase: Single Phase
• Warranty: 1yrs

We are the main supplier of this product.

• Dimensions: Cm.
• Bottom diameter Top diameter Height: 20 10 30

Introduction The oldest, most widely used test for determining workability. This test is used to determine the workability of fresh concrete, which would normally be undertaken at the point of delivery to ensure the concrete, is of adequate consistency for placement. The test is applicable to concrete of medium workability.     The device is a hollow cone-shaped mould. The mold is filled in three layers of each volume. Each layer is rodded with a 16mm steel rod 25 times. The mould is then lifted away and the change in the height of the concrete is measured against the mould. The slump test is a measure of the resistance of concrete to flow under it own weight.   General Descriptions & Specifications The apparatus comprise of a slump cone with handles made of mild steel sheet, a chrome plated steel tamping rod of 16 mm diameter X 600 mm long, rounded off at one end, with a scale marked on it and a steel base plate with a carrying handle.     The mould for the test specimen will be in the form of frustum of a cone having the following internal dimensions as follows   The Cone is constructed of metal of at least 1.6 mm thickness and the top and bottom are open and at right angles to the axis of the cone. The mould have a smooth internal surface and provided with suitable foot pieces to a base plate and also handles to facilitate lifting it from the moulded concrete test specimen in a vertical direction as required by the test. The base plate is provided with cleats & swivel handle.   Optional Accessories CONCRETE SCOOP.FUNNEL FOR POURING CONCRETE IN CONE STRAIGHT EDGE

• Description and specifications: The apparatus comprise of a slump cone with handles made of mild steel sheet, a chrome plated steel tamping rod of 16 mm diameter X 600 mm long, rounded off at one end, with a scale marked on it and a steel base plate with a carrying handle. Etc
• Optional Accessories :: CONCRETE SCOOP. FUNNEL FOR POURING CONCRETE IN CONE STRAIGHT EDGE

Introduction he oldest, most widely used test for determining workability. This test is used to determine the workability of fresh concrete, which would normally be undertaken at the point of delivery to ensure the concrete, is of adequate consistency for placement. The test is applicable to concrete of medium workability. The device is a hollow cone-shaped mould. The mold is filled in three layers of each volume. Each layer is rodded with a 16mm steel rod 25 times. The mould is then lifted away and the change in the height of the concrete is measured against the mould. The slump test is a measure of the resistance of concrete to flow under it own weight.

• Material: M.S /s.s
• Tray: 900 x 900 or 1000 X 1000 MM (L X W)
• Slump cone: 200 x 100 x 300 MM (D1 x d2 X H)
• Stand: 1/2 FT With stand
• TRAY SIZE: 700X 700 MM
• CONE: 100 X200X130 MM

Base has cleats on its underside to help dig into the ground surface Positive clamping of slump cone to the base while filling and rodding the concrete A combination swivel carrying handle also doubles as the datum making the conventional and somewhat awkward measuring procedure of using a foot rule and a datum bar, a thing of the past Supplied complete with base plate, having cleats and swivel handle This test is considered suitable for cohesive and plastic mixes of concrete containing aggregate smaller than 50 mm. The slump cone is filled with freshly mixed concrete and is tamped with a tamping bar in three or four layers. The top of the concrete is leveled off with the top of the slump cone, the cone is lifted vertically up and the slump of the sample is immediately measured.`

• Dimensions: Cm.
• Bottom diameter: 20
• Top diameter: 10
• Height: 30  

The oldest, most widely used test for determining workability. This test is used to determine the workability of fresh concrete, which would normally be undertaken at the point of delivery to ensure the concrete, is of adequate consistency for placement. The test is applicable to concrete of medium workability.The device is a hollow cone-shaped mould. The mold is filled in three layers of each volume. Each layer is rodded with a 16mm steel rod 25 times. The mould is then lifted away and the change in the height of the concrete is measured against the mould. The slump test is a measure of the resistance of concrete to flow under it own weight. General Description and specifications : The apparatus comprise of a slump cone with handles made of mild steel sheet, a chrome plated steel tamping rod of 16 mm diameter X 600 mm long, rounded off at one end, with a scale marked on it and a steel base plate with a carrying handle.The mould for the test specimen will be in the form of frustum of a cone having the following internal dimensions as follows. The Cone is constructed of metal of at least 1.6 mm thickness and the top and bottom are open and at right angles to the axis of the cone. The mould have a smooth internal surface and provided with suitable foot pieces to a base plate and also handles to facilitate lifting it from the moulded concrete test specimen in a vertical direction as required by the test. The base plate is provided with cleats & swivel handle. Optional Accessories : CONCRETE SCOOP.FUNNEL FOR POURING CONCRETE IN CONE STRAIGHT EDGE

• Bottom diameter: 20 Cm.

the oldest, most widely used test for determining workability. This test is used to determine the workability of fresh concrete, which would normally be undertaken at the point of delivery to ensure the concrete, is of adequate consistency for placement. The test is applicable to concrete of medium workability.the device is a hollow cone-shaped mould. The mold is filled in three layers of each volume. Each layer is rodded with a 16mm steel rod 25 times. The mould is then lifted away and the change in the height of the concrete is measured against the mould. The slump test is a measure of the resistance of concrete to flow under it own weight. general description and specifications : the apparatus comprise of a slump cone with handles made of mild steel sheet, a chrome plated steel tamping rod of 16 mm diameter x 600 mm long, rounded off at one end, with a scale marked on it and a steel base plate with a carrying handle.the mould for the test specimen will be in the form of frustum of a cone having the following internal dimensions as follows. dimensions cm. bottom diameter 20 top diameter 10 height 30 the cone is constructed of metal of at least 1.6 mm thickness and the top and bottom are open and at right angles to the axis of the cone. The mould have a smooth internal surface and provided with suitable foot pieces to a base plate and also handles to facilitate lifting it from the moulded concrete test specimen in a vertical direction as required by the test. The base plate is provided with cleats & swivel handle. optional accessories : concrete scoop.funnel for pouring concrete in cone straight edge

Slump Test Apparatus ( AIM 334) Ref Stds :IS:7320, BS:1881, ASTM C 143, AASHTO T119   The slump cone is filled with freshly mixed concrete and is tamped with a tamping bar in four layers. The top of  he concrete is levelled off with the top of the slump cone,  he cone is lifted vertically up and the slump of the sample  simmediately measured.   Application Consistency Test,Workability determination of concrete mixes. Industry Civil Infrastructure Cement/RMC Construction Chemicals Dams & Tunnels Fly Ash Irrigation Railways Sleepers Real Estate Refractories Roads, Highways & Bridges Education Architecture Building Technology Civil Department Geotechnical Science Colleges Metal & Material Tiles & Ceramics Special Applications Fly Ash Traffic & Transportation Railways Roads, Highways & Bridges

• Bottom diameter: 20
• Top diameter: 10
• Height: 30

The oldest, most widely used test for determining workability. This test is used to determine the workability of fresh concrete, which would normally be undertaken at the point of delivery to ensure the concrete, is of adequate consistency for placement. The test is applicable to concrete of medium workability.The device is a hollow cone-shaped mould. The mold is filled in three layers of each volume. Each layer is rodded with a 16mm steel rod 25 times. The mould is then lifted away and the change in the height of the concrete is measured against the mould. The slump test is a measure of the resistance of concrete to flow under it own weight. General Description and specifications : The apparatus comprise of a slump cone with handles made of mild steel sheet, a chrome plated steel tamping rod of 16 mm diameter X 600 mm long, rounded off at one end, with a scale marked on it and a steel base plate with a carrying handle.The mould for the test specimen will be in the form of frustum of a cone having the following internal dimensions as follows The Cone is constructed of metal of at least 1.6 mm thickness and the top and bottom are open and at right angles to the axis of the cone. The mould have a smooth internal surface and provided with suitable foot pieces to a base plate and also handles to facilitate lifting it from the moulded concrete test specimen in a vertical direction as required by the test. The base plate is provided with cleats & swivel handle. Optional Accessories : CONCRETE SCOOP. FUNNEL FOR POURING CONCRETE IN CONE STRAIGHT EDGE

Slump Cone, Tower Hoist, Rotary Type Electric Sand Screening Machine

Slump Cone, civil laboratory equipment, Cube Mould, glassware products

Slump Test Apparatus, Digital Thermometer, lab glassware, Lab Chemical