Soil Testing Equipment Dealers in Odhav, Ahmedabad

Mett-Bio Metallurgical Testing & Services with its state of the art equipment setup consisting of Salt Spray Chamber Complying to the Requirement of ASTM B 117/ ASTM G 85.   Tests are performed in our ISO 17025:2005 NABL accredited lab under the standard Specified conditions or as per specific field conditions.   Salt spray testing is a test method where in a product or coatings resistance to corrosion is evaluated in severe corrosive conditions with extended exposure to a saline or salted spray   This testing is carried out in a closed chamber which is filled neutral salt fog. The test specimen is exposed to a predetermined time period and inspected during its exposure. This test is carried out to check the integrity of coatings, paints in a corrosive environment. This test is carried out as per ASTM B117.   Types of Salt spray testing:   · Neutral Salt Spray (NSS), · Acetic acid Salt Spray (ASS), · Copper sulphate Acetic Salt Spray (CASS)   The salt spray test can be acclimatized to suite different corrosivity level to simulate different environments.   The test specimen is exposed to a predetermined time period and inspected during its exposure. This test is carried out to check the integrity of coatings, paints in a corrosive environment. This test is carried out as per ASTM G 85.   A standard 5% salt solution of sodium chloride known as NSS or neutral salt spray and a solution of acetic acid known as ASS. The solutions are chosen based on the type of coating to be evaluated   Other salt variations: SO2 / Calcium Chloride (CaCl2)

• Automation Grade: Automatic
• Application: For Siol Laboratory
• Weight: 5 kg
• Voltage: 230 V
• Finishing: Powder Coating
• Brand Name: DM
• Display Type: Analoge and Digital
• Power: Electronic
• Material: Mild Steel
• Precision Cone Penetration: +- 0.1mm
• Maximum Range: 70mm

• Material: Cold Roll Steel
• Application: Industrial
• Working chamber sizes (FT): (L x DX H) 2 x 2x 2 ,3 x 2 x 2 ,4 x 2 x 2 ,6 x 2 x 2
• Feature: Multiple Working Ports
• Width: 750 mm to 2400 mm

ESCR Test Apparatus: Environmental stress cracking is a property that is highly dependent upon the nature and level of stress applied and on the thermal history of specimen. This taste is normally employed for routine inspection purpose.   

The California bearing ratio test is penetration test meant for the evaluation of subgrade strength of roads and pavements. The results obtained by these tests are used with the empirical curves to determine the thickness of pavement and its component layers. This is the most widely used method for the design of flexible pavement. The laboratory method for the determination of C.B.R. of undisturbed and remolded compacted soil specimens, both in soaked as well as unsoaked state.

• Brand Name: KJ
• Load frame electric operated capacity: 50 KN (5000 kgs.) with high and low rate of travel of the lead screw
• Mould 150mm internal dia: 175 mm high with perforated base plate, collar, tie rods and wing nut
• Penetration piston: face dia 50 mm with adjustable bracket for Load Cell
• Circular metal spacer disc: 148 mm dia x 47.7 mm high with detachable handle
• Annular metal weight: 2.5 kg, 147 mm dia with 53 mm dia hole
• Slotted metal weight: 2.5 kg, 147 mm dia with 53 mm slot
• Perforated plate: 148 mm dia with adjustable stem and lock nut brass
• Usage/Application: soil test
• Material: IRON

• Temperature: 25.0° C To 40.0° C
• Accuracy: ± 0.3° C
• Timer: 1 min to 99 hrs 59 mins 59 secs

Microprocessor based Tablet Disintegration Machine is used for testing the disintegration time for tablets, capsules, and other solid dosage forms. Tablet Disintegration Machine is designed to meet the specifications of USPIPBP pharmacopoeia. Acrylic Tank is placed on the platform. A square shaped immersion Heater is also fitted to this acrylic water bath. Two 1000 cc capacity beakers supplied with the equipment are filled with water and placed on the stand in the water tank. The water in the waterbath is maintained at 37° C with an accuracy ± 0.3° C. Temperature setting is not required.

• Brand Name: EIE

We are offering standard penetrometer. As per is 1448(p-92),is 1448(p-93),is 7401 ip 49 & 50, ip-179, ip-376, astmd 1321, astm d 937 this apparatus is used for penetration test on a wide variety of materials such as grease, petroleum, bitumen, tar, wax, olish, foodstuff, rubber asphalts and pharmaceutical creams. A depression is made in the sample by a needle of a definite weights which is measured intenths of a millimeter and expressed as penetration number. the apparatus consist of a cast aluminium base with an iron stand on which moves an aluminium arm and brass chromium plated rod slide through the lower portion of the arm. A needle with weights is fitted to this rod. The penetration value and penetration time is indicated on digital panel with least count on 0.01mm. Supplied complete with adjustable needle holder, penetration needle, sample container, transfer dish and weight of 50 gms. Salient features. * with geared arrangement for moving the arm with geared unit. * provision to readout penetration value & time of process. * penetration value in 000.0 * penetration value maximum up to 500.0 (50.00mm) * panel cut out size : 92 x 188 mm. * provision to set the time value of from 0.00 to 99.99 sec. * the timer output is 300v dc without load. * provision for tare for penetration. * provision for calibration. * provision for default calibration. * with pcprinter interface with software fir direct printout of calculated results (at extra cost) at extra cost bitumen container 55 mm x 35 mm bitumen container 70 mm x 45 mm bitumen container 55 mm x 57 mm brass cone aluminium solid cone weight (50gms or 100gms) grease container 10 cm dia & 10 cm height bath for penetration test.

• Type: Laboratory Furniture
• Material: Mild Steel
• Voltage: 220/230 Volts AC Supply

Fabricated out of thick Mild Steel Sheet these are designed so as to throw out toxic/harmful vapours, thus protecting costly instruments & the person working in the lab. The outer surface is finished with powder coated & inner surface is epoxy painted.   The working table top is fitted with acid/alkali resistant tiles/S.S & a small wash basin with connections provided for inlet & outlet of water. The front door moves vertically up & down with concealed counterbalanced weight. The unit is fitted with fluorescent light & a gas cock of gas/air supply. The space under the work station can be provided with storage compartments for storage purpose. The front-facing panel is fitted with 15/5 amp socket with switches for exhaust system & fluorescent light to work on 220/230 volts AC Supply.

Used to check and maintain the slope of the road as per design. Material- aluminum section of size 24 mm x 45 mm of thick gauge. Size- 3 meter, 3.5 meter, 3. 75 meter or as per requirement. Ratio- 2.0%, 2.5%, 3.0% or as per requirement. Accessories- highly sensitive magnetic spirit level and seat for it at centre.

  Introduction Used to determine the flakiness index of the aggregate. The aggregate particles are to be considered flaky, if their thickness is less than 0.6 of their nominal size.It consists of a frame with sliding panel with accurate slots of different standard width and length, the complete assembly is chrome plated or powder coated.

• Temperature Range: 0-400 deg °C.
• Model No.: ESCR- A
• Time totaliser range: 999.9 hours
• Accessories: Cutting die, nicking jig, bending cum transfer tool, specimen holder, test tube & rubber cork
• Water circulation: Through induction motor with stirrer
• Testing capacity: 6 tests at a time
• Heating load: 1.5 to 3 KW
• Body: Inner S.S and Outer M.S with powder coating
• Power Supply: 230V AC, 50Hz
• Inner size of bath: 12"X 8"X 9"
• Dimension: 28"X 13" X 25"
• Net weight: 36 kgs

• Voltage: 230
• Material: SS
• Display Type: DIGITAL
• Scale Value: 1 TO 100 KG
• Power: DC
• Size: 1 TO 25 MM

Soil Testing Equipment, Bursting Strength Tester, Digital Comparators

Slump Cone, Tower Hoist, Rotary Type Electric Sand Screening Machine

bitumen testing equipment, civil laboratory equipment, Cube Testing Machine