Solvent Recovery System Dealers in Ahmedabad

• After-Sales Service Provided: 3 year service

Chemical free operation, simple, easy and savedigital timer for light finishing controlphilips uvc high intensity lamps equippedwith powerful air exhausting for big size models solvent recovery systems advantages : • reduce your solvent disposal costs and wastewater treatment surcharges • 1 year or better payback on most solvent recycling • equipment sized to meet the needs of small users, and the largest industrial plants. • with new, used, and refurbished options, we can usually find a system to fit your budget. • technical help with setting up and training to use the solvent recycling systems • we won’t forget you after the sale. # operating steps after opening the crate, plug in 220 v power, and connect the ground (earth). Open the lid and fill the tank up to the level with solvent to be recovered (80 l) close the lid and tighten it. Check all the pipe hose make sure it is well connected. Especially vacuum pipe (6) and fresh come-out pipe(1). Set up the thermostat(18) for example for perc.is 150 degree c, for green chemical is 160-210 degree c. Vacuum tank pressure(3) high at 0.03 mpa low at 0.01mpa, and steam cooling fan thermostat(11) at 40 degree c. Turn on the power switch(15), steam cooling switch(16), heater switch(17) and vacuum pump switch(12). If you want to be controlled with timer, it depends on the quantity of the chemical, set up the timer(14) then turn on the switch(13). # important install the unit in a wide and ventilated place disconnect electric power before doing any action no taking off the control panel change the diathermic oil every 1000 working hours no filling the solvent container up over the level (80 liters) remove the waste after every recovery process recovery time 3 o 4 hours

This is designed for recovery of flexographic photopolymer plate solvent washout chemical and any environmental green chemical with specialties of distilling and cooling can be connected with in-line processor and any plate washout machine directly. With cold air circulation and drain out of residue for high speed recovery. Super recovering rate in the shortest time, is an ideal and high efficient recovery unit for flexographer.   B. Technical information: Recovery volume: 100 litersPower consume: 220V AC 6.65KWDiathermic oil: 40 KGMachine dimension: Main body: 1500x 980×1500 mmRecovery rate: 85%Recovery time: 3 ~ 4 hours   C. Operating steps: 1. After opening the crate, plug in 220 V power, and connect the ground (earth).2. Open the lid and fill the tank up to the level with solvent to be recovered (100 L) 3. Close the lid and tighten it.4. Check all the pipe / hose make sure it is well connected. Especially vacuum pipe (6) and fresh come-out pipe (1).5. set up the thermostat (18) for example for Perc. Is 150 degree C, for green chemical is 160-210 degree C. Vacuum tank pressure (3) high at 0.03 Mpa / low at 6.01Mpa, and steam cooling fan thermostat (11) at 40 degree C.6. Turn on the power switch (15), steam cooling switch (16), heater switch (17) and vacuum pump switch (12).7. If you want to be controlled with timer, it depends on the quantity of the chemical, set up the timer (14) then turn on the switch (13).   D. Important: 1. Install the unit in a wide and ventilated place.2. Disconnect electric power before doing any action.3. No taking off the control panel4. Change the diathermic oil every 1000 working hours.5. No filling the solvent container up over the level (100 liters)6. Remove the waste after every recovery process

Solvent Recovery Unit, Stamp Making Machine, Plate Making Machines