Special Purpose Paints Dealers in Thaltej, Ahmedabad

• Form: Part A grey paste / P art B beige paste
• Volumetric mass: Part A 1650 kg/m3– P art B 1720 kg/m3
• Mixing ratio: Part A : Part B = 1 : 1
• Viscosity of the mixture: 1000000 mPa’s (rotor 95 RPM 2.5) Brookfield method
• Density of the mixture Pot life(1 kg): 1700 kg/m3
• At +5 °C: ≥ 100 min
• At +23 °C: ≥ 20 min
• At +30 °C: ≥ 15 min
• Temperature for application from: +5 °C to +30 °C

Hydro Epoxy is a thixotropic, epoxy paste system, that  complies  with the  performance  requirements for structural bonding.Areas of Application For structural bonding between pre-fabricated concrete structures and reinforced or pre-stressed concrete elements For structural bonding of steel plates and pultruded composite plates to reinforced and pre-stressed concrete For waterproofing inside the watertanks where hydrostatic / negative preassure exists.   Features & Benefits Eco-friendly Excellent adhesion to concrete, steel and composite materials Organic mineral adhesive for the structural bonding of concrete, steel and composite material elements Resistant to environmental chemical aggression and suitable for all exposure. Safeguards the health of operators.   Method of application : Structural bonding of prefabricated concrete structures to reinforced and prestressed concrete elements, and of steel slabs , pultruded plates and composite fabrics to reinforced and prestressed concrete elements Surface filling of cracks prior to injection of fluid mortars for structural consolidation   PreparationHydro Epoxy is prepared by mixing component A with component B (preset ratio 1 : 1 in the buckets) until a soft paste of uniform colour is obtained. Mix by hand or using a low-rev, mechanical stirring device. Workability timesmay vary according to the density of the mixed paste and the temperature of the environment and substrate: the higher the temperature or the larger the mixture, the lower the workability time.   Application Before applying Hydro Epoxy first brush or preferably sandblast the concrete substrate to roughen and clean it, removing any remaining dust, grease, oil or other contaminants until the substrate is clean and cohesive. Once all rust, oil and paint has been removed, metal surfaces must be prepared to standard by first manually cleaning them or by mechanical cleaning (sandblasting) Hydro Epoxy is applied with a spreader. We recommend spreading Hydro Epoxy on both surfaces to be bonded, making sure the product penetrates well in more uneven parts of the substrate. To strengthen cracked structures by first opening the crack using a flexible joint, removing any dust under pressure into previously drilled injection holes. Subsequently, the crack can be filled with Hydro Epoxy through injection tubes inserted into the same holes as before.   Precautions & Limitations : Use at temperatures between +5 °C and +30 °C Apply on dry substrates Do not apply to dirty or flaking surfaces Protect surrounding surfaces from accidental smearing and staining, which would be difficult to remove clean tools immediately after use with solvents (ethyl alcohol, toluene, xylene) Coverage : 1.7 kg/M2 per mm of thickness   PackingPart A 5 Kg Bucket & part B 5 Kg Bucket.   Shelf life & storage12 months in the original packaging Protect from frost, avoid direct exposure to sunlight and sources of heatHealth & saftey Precautions :Always use protective gloves and eyewear both during mixing and during application avoid any contact with the skin. Use in a well-ventilated environment

• Country of Origin: India
• Type: Silicone Softener
• Brand Name: Microgenix
• Application: Garments & Fabrics
• Classification: Silicone Textile Softener
• CAS No.: 63148-53-8
• Other Names: Silicone Emulsion or Silicone Softener
• Purity: 60% Solid
• Color: Clear to Milky
• Usage: Garments & Fabrics
• Solid: 60%
• Dilution: upto 1:10

• Color: Green
• Form: Liquid
• Molecular Weight: 724.16
• Features: Precisely processed, Long shelf life , Balanced composition
• Pack Type: Bottle
• Extraction Type: Solvent Extraction

Dupoxy Prime SFD: used for EPOXY FLOORING is the Epoxy Primer for concrete surface is a 100 % solids, low viscosity, epoxy for use in restoring concrete floors and concrete surfaces prior to application of new toppings or as a "stand alone" sealer. THIS PRIMERensures strong adhesion between an epoxy topcoat and the substrate. It may also be used to bond new concrete to old concrete.It has good penetrating properties in concrete. improves the adhesion of epoxy floor toppings coatings and epoxy mortars with substrate.uses : It is suitable for priming concrete surfaces prior to the application of any of the Dupoxy SL and SC range of resin based floor toppings, Dupoxy TCS & TC range of protective coatings or Dupoxy Putty repair mortars.Improves the adhesion of epoxy floor toppings and epoxy mortars with the substrate. Packaging:Dupoxy Prime SFD is available in 1, 2.5 & 5 kg packs.Coverage: Dupoxy Prime SFD - 6 - 8 m / ltr.

• Is It Waterproof: Yes
• Brand Name: SURYA WALL CARE,SURYA WALL CARE
• Color: Any Shade,ANY SHADE
• Application: Painting
• Packaging Type: M.S. Container
• Packaging Size: 20 Ltr / 10 Ltrs / 4 Ltrs
• State: Gujarat
• Country of Origin: India
• Finish: Glossy
• Paint Type: Solvent Base
• Type: IS 2932
• Size: 20 LTR / 10 LTR / 4 LTR

Needing exceptional chemical resistance, excellent protection against corrosion and low co-efficient of friction; then contact us- we are among the dependable PTFE Coating Service Providers, based in Ahmedabad- Gujarat. Apart from PTFE, we offer PFA / PEEK / KYNAR / PVDF / ECTFE / FBE/ Nylon Coatings, Chemical Process Equipment Coating, for ensuring proper protection against chemical reactions. Our PTFE Coating Services are used in varied parts of the industry. Also, we perform Heat Resistance Coating for varied Silencers, and render Hydrocarbon Resistance Coating for different Fuel Tanks.

• Color: Milky White
• Packaging Type: Drum
• Packaging Size: 190,30/50 kg
• Features: Natural to slick handle
• Usage: Textile Finishing Agent
• Form: Liquid

Eco Interior Emulsion is economic plastic emulsion paint designed for application on interior walls. It is formulated from a time tested co-polymer emulsion binder. Eco Interior Emulsion offers excellent smoothness and elegance to your interior walls, giving it a rich look. It has good water and alkali resistance properties, which makes the paint longer lasting. Coverage: On smooth primed masonry surface by brushing: 1 coat: 25-28 sq mtr/ltr, 2 coats: 13-15 sq mtr /ltr. Drying Time: Surface Dry time ~ 10-15 minutes. Gloss Levels: 0-4 on glass plate at 60° C. Stability of Thinned Paint: Use within 24 hrs. Shelf-life: 3 years from date of manufacture in original tightly closed containers away from direct sunlight and excessive heat. (Note: Actual coverage may vary from the quoted coverage due to factors such as method and condition of application and surface roughness.) Available Packing:20 LTR, 10 LTR, 4 LTR, 1 LTR

Pigment Beta Blue 15:4, Paint, offset ink pigments, pigment cake

A two pack epoxy polyamide cured coating with superb performance in severe marine and industrial environments,For application on Structural Steel, Pipelines, Storage Tank etc. subjected to aggressive environment. Suitable for application on columns and structures of fertilizer plants, chemical units,Two pack, cured with polyamide,Base : Catalyst : 3 : 1 by volume

High performance acrylic putty for sealing cracks in plasters, concretes, brickwork and gaps around penetrations (doors, windows, pipingconduits, etc.), Excellent adhesion to variety of surfaces such as concrete,masonry,wood,metals etc, Excellent ability to take differential thermal expansions of dissimilar materials, Filling volume: 1 kg of ACRYLIC-PRIME PUTTY will fill 125 feet of 4mm x 4mm crack.

Natural Food Colours are dyes or pigments extracted from natural sources such as fruits, vegetables and plants. Since its inception Aarkay has been manufacturing natural food Colours that serve the needs of a variety of Food and Beverage Industries.   Food Companies use Natural Food Colours for different reasons but more so for giving visual appeal, Colour uniformity and consistency to all their product ranges. Natural Colours are also used to create a unique product identity by using distinctive variations of Colours.We offer a wide range of Natural Food Colours in Powder as well as Liquid Forms which have greater stability and specific application assistance.   Due to its heat sensitivity and specific hue, Beet Root Colour is widely used in Frozen Products, Desserts, Sauces, Malted and Chocolate Beverages, Soups and Beverage Premixes. It is selectively used in Ice Creams or Yoghurts where the reducing pH during the shelf life of the Dairy Product does not affect the change in Beet Root Colour.

cpc blue pigment, pigment intermediates

Thickener, SS Static Mixer, VERTICAL SCREW SCREEN, Curved Screen

• Material: HDPE / PP
• Color: White

Cement & Wall Finish Bags offered by us feature durable construction standards that makes them suitable for meeting the packaging needs of end products like cement. These bags are also being made available in different design options as well as with custom printing options & specific requirements of our quality conscious clients. We have the packaging from 5 Kgs to 50 Kgs with a brand building designs.

• Type: Natural Food Powder
• Application: Cooking
• Style: Dried
• Cultivation Type: Natural
• Color: Green, Orange, Red, Yellow, ALL
• Feature: No Artificial Color, Non Added Preservative, Non Harmful
• Packaging Size: 25 KGS
• Packaging Type: BAGS
• Brand Name: OPHTHA
• Type: FOOD COLOUR
• Grade: HIGH
• Packaging Type: 25 KGS BAGS PACKING
• Taste: PURE
• Form: INDIN
• Tartrazine: Food Yellow 4
• Sunset Yellow FCF: Food Yellow 3
• Carmoisine: Food Red 3
• Ponceau 4R: Food Red 7
• Amaranth: Food Red 9
• Erythrosine: Food Red 14
• Allura Red: Food Red 17
• Chocolate Brown HT: Food Brown 3
• Indigo Carmine: Food Blue 1
• Brilliant Blue FCF: Food Blue 2
• Quinoline Yellow (WS): Food Yellow 13
• Patent Blue V: Food Blue 5
• Food Red 2G: Food Red 2G
• Food Black PN: Food Black 1

Road paint INDOGUARD EPOXY BASE FLOOR COAT PAINT, ASSOLAC CHLORINATED RUBBER BASE ROAD MARKING PAINT, ASSOLAC SYNTHETIC ROAD MARKING PAINT, INDOTEX ACRYLIC BASE ROAD MARKING PAINT (Water Thinnable).

• Country of Origin: Made in India
• Material: acrylic
• Design Type: Vertical
• Color: multiColor
• Max Height: 8 feet

Add White XT Pigments, Add Plast PE Additive, Add Plast C Additive

• Application: Agricultural
• Color: Brown
• Country of Origin: Tanzania
• Color: 95% green
• Bale Weight: 30kg +/-5%
• Protein: 15-18%/20-25%
• Fibers: 16%
• Moisture: 10-13%
• Drying: Sun-dry/ machine-dry

Alfalfa Hay is an outstanding feed for young animals. It contains more crude protein, digestible energy, and calcium levels than any other forage. In addition, it has the fiber content needed for normal digestive functioning. Alfalfa provides the essential calcium necessary for growing bones. Alfalfa is also a source of important minerals, including phosphorus, potassium, magnesium, sulfur, iron, zinc and selenium.

Thickeners range reactive dispersernpigmentrnpowder typernliquid typernsynthetic-natural blendsrninnovation is endless process.

texture paints, Chemicals Products, Dehydrated Vegetable Products

• Form: Solid
• Material: SILICONE
• Usage: Roof
• Model: SilShield SEC 2400
• Silsheild: GE
• Coating: Elastomer
• Orientation: Horizontal,vertical

Due to limited basic colors availability, the color desired to be given to the food, has its limitation. In accordance to have more hue and color Blended colors are used. Blended colors are mixture of two or more water-soluble color or lake colors. It's customized products. Dynemic can match exact color shade according to your counter sample. Egg YellowSpecial GreenLemon YellowApple GreenStrawberry RedMoss GreenRaspberry RedPea GreenTomato RedVioletOrange RedBright BlackSaffronGrapeChocolate BrownBlack CurrantRose Pink

• Type: Wall Putty
• Color: Black, White
• Application: Wall Putty
• Packaging Type: Paper Packet, Plastic Bag, Plastic Bucket, Plastic Packet
• Form: Powder
• Feature: Long Shelf Life, Super Smooth Finish, Unmatched Quality, Weather Proof
• Packaging Size: 10kg, 25kg, 50kg, 5kg
• Brand Name: Ambuja

We are offering to our valued customers a qualitative range of corian colours. Our customers can find a wide range corian colours of traditional & modern designs, colours and finishes with us.

• Brand Name: BOND
• Features: Heat Resistant, Moisture Resistant, Water Resistant
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

Ceramic Colour, Ceramic Colours, pigment colours