Back Back
Stainless Steel Solenoid Control Valves
3,500 Per piece
10 piece (MOQ)
Stainless Steel Wafer Check Valve
Get Price Quote
5 Piece (MOQ)
Best Deals from Stainless Steel Valves
Stainless Steel Pressure Relief Valve
329 Per Piece
1 Piece (MOQ)
3000 PSI Stainless Steel Needle Valve
380 Per Piece
50 Piece (MOQ)
Stainless Steel Ball Valve
1,500 Per Piece
Stainless Steel Double Block and Bleed Ball Valve
Get Price Quote
10 Piece (MOQ)
Stainless steel Hydrant Valve
2,850 Per Piece
50 Piece(s) (MOQ)
Being a reliable name, we are focused towards delivering exceptional quality range, along with this, we follow strict guidelines and conduct regular quality examinations to ensure quality. We have a strong security system that helps us to make online transactions possible without getting worried about the security. You need to share your details with us and we make sure that the details are kept confidential. Features : Sturdy metal Precision made Dimensional accuracy
SS VALVES
Get Price Quote
We are offering ss valves ( ball valve, knife valve, gate valve, flanged end valve, niddle valve etc.
Stainless Steel Ball Valves
300 Per Piece
Our investment in the well-structured warehouse has paid off well. We have successfully installed up-to-the-minute warehouse management software to keep the entire lot in a safe and organized manner. From the point of view of marketing, shipping, and handling, our products are securely packed in top-grade supplies using ultramodern packaging machines. The packaging is extremely reliable.
Stainless Steel Globe Valve
9,500 - 9,550 Per Piece
Stainless Steel Pinch Valve
Get Price Quote
Pinch valves, offered by our company, are the modified version of laboratory pinchcock in which rubber sleeve is protected under the casting made of cast iron. The main advantage of Pneumatic Pinch Valves is that the fluid passing from it does not come in contact with its metal parts except the sleeve. This property makes it corrosion resistive against the action of various fluids. Open Body Pinch Valves assure the smooth flow of water like pipeline and their collar sleeve eliminates gasket. Pinch valve is user friendly and can be operated easily as compared to other wheel operated valves. This valve allows positive control over flowing media because of its in between stoppage that gives desired throttling. These pinch valves are extensively used for handling corrosive slurry, liquid with solid suspensions, abrasive media, and many others. We offer pinch valve in best application range with flange as per BS, DIN, ASA & IS dimensions, and ranging between 15mm to 300mm. We are known widely as one of the proficient Pinch Valves Exporters and Suppliers. General Features & Highlights Seat Less & Glandless Valves Field Replicable Elastomer Sleeve. Elastomer Sleeve Having Four Reinforced Lugs Flanged Ends & Drilled to Din, Ansi, Bs-10, Is, Etc. this Valve Incorporates all the Design Modifications Based On Our Experience & is of Study Construction to Handle Abrasive Corrosive Media. BRIEF DETAILS OF PINCH VALVE Pinch Valve is a Seat less & Glandless valve. Pinch valve is a modified version of laboratory pinchcock. A rubber sleeve is protected under a cast iron casting. The fluid passing through do not come in contact with either body covering or any other metal parts of the valve except the sleeve. Hence the body and other metal parts are almost permanently not subjected to the corrosive action of the fluid. The flow through the valve is straight and full as that of a pipeline, when the valve is fully open. Further, the collar of the sleeve eliminates gasket. The valve is simple hand wheel operated of rising wheel type. Therefore the operation of the valve is just simple as other wheel operated valve. The in-between stoppage will allow the desired throttling. Thus the valve offers positive control over flowing media. Applications Pinch valve finds its best application in handling corrosive slurry, abrasive media, liquid with solid suspensions and many others, which are difficult to handle with seat valve. Range The flange of the pinch valve can be supplied in accordance to BS, DIN, ASA & IS dimensions The range for the valve is from 15 mm TO 300 mm. Actuation The valve can be supplied with Electrical and pneumatic actuation. <? include("other-files/pinch-valve.html"); ?> Operating Manual OF PINCH VALVE THE PINCH VALVE is a modified version of the laboratory pinchcock. A rubber sleeve is protected under a Cast iron or Aluminum split body casting. The valve is a simple hand wheel operated of rising wheel type. The operation of the valve is same as other hand wheel operated valve, it closes when moved in clockwise direction and opens when moved in anticlockwise direction. The in-between stoppage will allow the desired throttling. Thus the valve offers positive control over flowing media. The flow through the valve is same as that of a pipeline, when the valve is in fully opened condition. Further, the rubber sleeve eliminates the need of a gasket. PRELIMINARY PRECAUTION On receipt of the valve please check the position of the valve, as it is advisable to keep the valve in fully opened condition. Also check the position of the travel limit nut, if found loose then tighten the set screw of the nut. INSTALLATION The valve can be installed without any gasket unless it is required for some specific purpose. Tighten the nut of the flanges evenly & equally, but avoid too much tightening. After installation check the free movement of the upper & lower pinching bar by opening & closing the valve. The valve is then ready for the service it is installed for. MAINTENANCE If the valve is found leaking through the seat after sometime even though in fully closed condition, then set the travel limit nut by just taking it 1 or 2 threads above & then tighten. This will allow more room for traveling of rubber sleeve & ensure the valve to zero leakage. This problem sometimes occurs when the sleeve is slightly worn out, when used under abrasive condition. Further, The Rubber sleeve of the valve up to 2 (50mm) have a single lug on either side and it goes into the hollow passage of the pinching bar where it is fixed with the lug clamping screws. In the higher sizes above 2 the sleeves have two lugs on either sides and is fitted overlapping the pinching bar. DISMANTLING THE VALVE & REPLACING THE RUBBER SLEEVE When the rubber sleeve is ruptured or totally worn out then it is to be replaced with a new one. In this case first dismantle the valve by following the instructions. Remove the hand wheel. Open the Tie Bar nuts. Disconnect the spindle from the Horseshoe connection and remove it completely with the bridge. REMEMBER not to temper the set screw of the yoke bush, unless if required it should be completely tight. Open out the nuts & bolts of the split body of the valve. Remove the screw of the lugs from both the pinching bars. Now fit the new rubber sleeve & reverse the operation to assemble the complete valve. NOTE It is advisable to keep a spare rubber sleeve for maintenance purpose, considering the self life of the Rubber as six months when packed & stored in dark. The Pinch valves should be stored in fully open condition only. We also offer complete spares of the valves, but request you to place your order a week in For more details please click on the links given below
Stainless Steel Ball Valves
900 Per piece
01 Piece(s) (MOQ)
Stainless Steel Valves
200 - 600 Per Kilogram
2 Metric Ton (MOQ)
Stainless Steel Ball Valve
Get Price Quote
100 Piece (MOQ)
Stainless Steel Ball Valve
450 Per Piece
10 Piece (MOQ)
Stainless Steel Dairy Valve
Get Price Quote
10 Piece (MOQ)
Sanitary Stainless Steel Valves
Get Price Quote
Sanitary Stainless Steel Valves
FORGED STAINLESS STEEL VALVES
Get Price Quote
FLOEC Forged Stainless Steel Valves that are high quality material and are appreciated in the market due to their aspects such as durability, compact make as well as corrosion resistance.
Stainless Steel Ball Valve
350 Per Piece
Stainless Steel Globe Valves
3,500 Per Piece
STAINLESS STEEL SCREWED END valve
Get Price Quote
STAINLESS STEEL SINGLE PIECE SCREWED END We offer our quality finished Stainless Steel Single Piece Screwed End to our clients. The long tapered point helps you to cover smaller are as compared to other valves. The quality design assures our clients for best performance under extreme conditions.We give maximum importance to the quality of the products that we offer and thus conduct diverse quality tests.We are capable of entertaining the urgent and bulk requirements of the customers owing to the dependable logistics facilities.Features Easy to install Minimum maintenance Controls the flow of liquids Rigid design Flawless finish
Ss Needle Valve
425 Per Piece
We are the leading manufacturers, exporters and supplier of this products.
Stainless Steel Niddle Valve
Get Price Quote
We offer a varied range of needle valves made out of quality raw materials. Our wide range of needle valves include isolation valves, forged needle valve, high pressure needle valve and brass needle valve.
Stainless Steel Ball Valve
800 Per Piece
Stainless Steel Butterfly Valve
Get Price Quote
We have with us wide range of Stainless Steel Butterfly Valve which are carefully crafted and designed by the leading manufacturers of the industry associated with us. You can find its applications in food industry, pharmaceuticals, chemicals, and for many other industrial applications. Best quality stainless steel is used for the making of the butterfly valve. We ensure that proper quality check is done by the experts of the manufacturing company before the product is packed for shipment to client location. We make the best possible effort to offer it in the market at an affordable price. High durability Robust construction We being the leading distributor of the industry are ready to assist customers in making the right selection of valves for their use. For any information about the products and prices we request you to get in touch with us. We will help you with valuable information about product.
Stainless Steel Valve
Get Price Quote
We are the leading exporter and supplier of this products.
Stainless Steel Valve
1,100 Per Piece
Stainless Steel Relief Valves
Get Price Quote
Stainless Steel Valve
Get Price Quote
Stainless Steel Valves
Get Price Quote
Our SS Valves is highly durable and sustainable in nature. Made up of high grade raw material these items are hugely demanded in both national and international market of industrial valves. Stainless steel used in these valves is superior quality which provides rugged composition of this item. Features: Light in weight Compact structure Technical specifications: Material used: Stainless Steel
