Sterilizing Machine Dealers in Sp Ring Road, Ahmedabad

Salient Features Each independent filter plenum is provided with filter integrity sample ports. The equipment’s conveyor belt is monitored and alarm status is activated if it operates outside the belt speed set points. Provision for ports to allow introduction of validation thermocouples in each zone. The tunnel is provided with fully integrated ampoule / vial flow control logic to allow automatic stops and restarts of the equipment. All filter modules have differential pressure gauges to monitor pressure. Pressure switches with high and low alarms When the tunnel is not in use it can be operated in night-mode to save energy while preventing contamination.

What is class B & class N AUTOCLAVE. The class B autoclave is defined by a pre Sterilization vacuum cycle. The class B is considered to be the highest class of autoclave and can be used to sterilize all loads including solids, type hollow instruments, type B hollow instruments, porous loads and wrapped instruments. All B type autoclaves must pass a Helix test as per standard EN 13060 outlined by EN 867-5:2001. This can only be achieved by use of a pre Sterilization fraction vacuum.Post Sterilization vacuum drying ensures complete drying of all loads after the Sterilization process is complete.Class N autoclaves do not feature a vacuum cycle and are suitable for Sterilizing unwrapped solid instruments and liquids. Application: KEC Series Sterilizers are pre and post vacuum autoclaves for Sterilization of wrapped materials,Unwrapped materials, hollow instruments, solid instruments, porous loads, textile and liquids. High precision computerized control systems for efficient Sterilization results. It is the idea of Sterilization solution for any medical, dental, healthcare, laboratory and so on. Main Features: Fully automatic bench top autoclave with pre set programs Complies with European standard EN 13060 (Class B only) In built independent rapid Steam generator ensures quick Sterilization cycles. Rapid post Sterilization vacuum drying. User friendly interface. LCD screen displaying time, temperature and pressure, process alert and instrument conditions. Choice of language settings including: English, Spanish, German and Chinese. Easily accessible water tank. Liquid KEC sterilization program optional High Performance Autoclave Precision and Efficient High Performance High precision control system for perfect Sterilization result. Powerful vacuum pump resulting in prefect class B Sterilization cycles. A built-in independent Steam generator provides readily available Steam for faster cycles. Simple-operating Full automatic table top autoclaves with pre-programmed Sterilization cycles. Easy to use - LCD screen. Detailed cycle data and autoclave status displayed. Friendly interface allowing the user to easily browse programs or set the autoclave. Multiple languages can be selected in the operating system. Password protection provides secure access for system setting. Safety A cycle will not start unless the door is properly locked. An double locking double locking safety device prevents the door from opening while the chamber is pressurized. A pressure safety valves prevent over pressurization in chamber and Steam generator. A safety thermostat prevents over heating in the chamber and Steam generator. An automatic safety shut-off prevents. An electricity-leaking protector will cut the power automatic if somewhere has short circuit or the power supplier is not very stable. An automatic safety shut-off prevents. Documentation Internal printer prints detailed cycle program information in multiple languages. USB port & USB stick: all cycle program information in multiple languages is automatically written in the USB stick and cab be read directly in any PC. Internal memory: the last 20 cycle’s information can be automatically stored in the autoclave system, which can be printed out at any time.

• Certification: CE Certified
• Voltage: 110V, 220V
• Frequency: 50Hz, 60Hz
• Feature: Durable, Easy To Operate, High Performance, Rust Resistant
• Warranty: 1yrs, 3yrs, 5yrs
• Automation Grade: Fully Automatic, Semi Automatic
• Application: Labortary Use,Hospital Use

• Capacity: 0-100ltr, 100-200ltr, 200-300lrt, 300-400ltr, 400-500ltr
• Frequency: 50Hz
• Power: 1kw, 2kw, 3kw, 4kw, 5kw
• Warranty: 1yrs
• Automation Grade: Fully Automatic, Manual, Semi Automatic
• Brand Name: Shivam Technomech
• Condition: New
• Advantage: Fast service
• After-Sales Service Provided: Yes
• Volume: 2

• Size: as per requirement
• Model Number: ssi011
• Brand Name: Soul sterile industry
• Material: ss,ss
• Shape: horizontal
• Application: pharmaceutical use
• Shelf Life: na
• Gender: na
• Feature: na
• Density: na
• Taste: na
• Form: na
• Automatic Grade: yes
• Packaging Type: wooden
• Melting Point: na
• Customization: na
• Lead Time: na
• Protein: na
• Refractive Index: na
• Solubility: na
• Boiling Point: na
• Packaging Size: na
• Calcium: na
• Automation Grade: na
• Potassium: na
• Features: na
• Colour: na
• Usage/Application: pharmaceutical
• Bending Material: na
• Brand: soul sterile industry
• Mobile Brand: na
• Warranty: 2
• Country of Origin: india

Sterilizers are special equipments used to make a product free from live bacteria or other microorganisms. The sterilizer process is used to kill all microbes. The industries such as pharmaceuticals and health care have become more concerned about safety issues and thus sterilizers become an essential component for controlling microbial contamination. Sterilization can be achieved through application of heat, chemicals, irradiation, or filtration.

• Type: Hospital Sterilizers
• Voltage: 110V, 220V, 240V, 380V
• Application: Medical Use, Steam Generation
• Capacity: 0-100ltr, 100-200ltr, 200-300ltr, 300-400ltr, 400-500ltr, 500-600ltr, 600-700ltr
• Frequency: 50Hz, 60Hz
• Power: 1kw, 2kw, 3kw, 4kw, 5kw
• Feature: Durable, Easy To Operate, High Performance, Kill Bacteria, Rust Resistant, Spores And Germs
• Warranty: 1yrs, 3yrs
• Automation Grade: Fully Automatic, Manual, Semi Automatic

SALIENT FEATURES : To Sterilize Surgical Medical Device Products like I.V. Sets, Disposable Syringes, Disposable Surgical Set, catheter, Urin Bag, reduce microbiological load; and increase life span of material. Modular construction of chamber. All machines are available with conventional hinged doors, or Modern Automatic sliding door options Model is available from 1/2 CU.MTR TO 5 CU.MTR. Contact Parts : S.S.304 / 316 Quality. In case of GMP complete S.S ( Material of Construction. Fully automatic operation based on PLC control (optional). Semi Automatic (Pneumatically Operated Ball Valave) Control Models are available in Semi Automatic as well as Fully Automatic. Double door, flush mounting with door interlocking systems. IQ/OQ/DQ documentation(OPTIONAL).

• Conveyor Width: 300mm, 450mm, 600mm, 750mm, 900mm & 1200mm
• Tunnel Types: Sterilizing &Depyrogenation
• Use for Sterilization: Glass Ampoules, Vials & Bottles
• Total Zone: Pre Heating Zone, Sterilizing Zone, Cooling Zone
• Output: Depends on belt size
• Conveyor Height: 900mm +/- 15mm
• Working Direction: Left To Right
• Power Consumption: Depend on tunnel model or size
• Dimensions: Depend on tunnel model or size

Harsiddh Engineering Company, being leading name in the manufacture and export of pharmaceutical packaging machinery provides excellent decontamination and sterilization equipments. Our specially designed equipment is used in sterilization and depyrogenation of ampoules, bottles and vials. The machine comes as a complete unit with in-feed system, preheating and sterilizing zone, cooling and exit feed mechanism. As the bottles and vials move along the conveyor, they are sterilized. The equipment receives materials from up line washer and these are directed to the drying zone. At this zone, hot air vaporizes the washing moisture and preheats the bottles. They then move to the hot zone where they undergo sterilization and depyrogenation through heating. They are then subjected to cold air which cools them off before entering aseptic region. Our machines have CE certification. Our sterilization machines uses advanced instrumentation and control topologies to effectively moderate heat, water, air and other materials. Temperature sensors regulate heating and cooling while pressure gauges regulate the system pressure. The conveyor belt speed is also carefully controlled. In addition the system has an advanced PLC control module that monitors and regulates all processes.   Silent Features     Repetitive accuracy in reduction of endotoxin count. High productivity due to reduced idle time and optimization of operating time. Infinitely variable speed to achieve optimum production. Swift and convenient to use machine. Intelligent logic control systems for controlling temperatures in heating and cooling zones. Complete closed loop systems for heating zone and cooling zone. Important parameters are password protected. Graphics for displaying and editing various procted. Accurate data logging on to printer and recording onto strip chart recorder (optional). Auto shut down after batch completion Automated Self Sterilization of the cooling zone using Dry Heat Documentation available for qualification, validation Full PLC controlled and reliable depyrogenation process Double wall asbestos free ceramic wool insulated re circulatory module containing high temperature EU – 13 grade final HEPA filter with suck back mechanism suitable for 300 °C continuous repeated cycle. This zone provides uniform hot air over the glassware for the Purpose of de pyrogenation. In this zone the temperature raises as quickly as Possible by the help of heating element, without inducing cracking due to excessive thermal stress. The glassware remains in this zone at a required time period to meet The specified endotoxins reduction generally > 3 log scale. This section consist of unidirectional hot air flow unit with turbine blower assembly, High temperature HEPA filter (up to 350 °C) and heater bank assembly. Integrated temperature sensors are provided for monitoring & controlling purpose of Temperature inside the sterilizing zone. For this purpose one sensor is placed above The HEPA filter and the sensor is placed at the entry side of sterilizing zone. For Extra precaution one temperature sensor provided at Heater Assembly ( 375 °C) is placed for protection of Heaters. The entry and exit side of the sterilizing zone consists of manually adjustable profile Plates resulting in maximum temperature uniformity and ensure consistent result for Glassware with varying sizes.

ETO Sterilizer Sailent Featurs : For Sterilization of I V sets, Single Use Medical Devices, Syringes, glass wares / containers, vessels, linen, rubber articles culture media etc. Modular construction of chamber. Model is available from 1/2 CU.MTR TO 25 CU.MTR. Easy to operate. Fully automatic operation based on PLC control (optional). Semi Automatic (Pneumatically Operated Ball Valave) Control Sliding doors with high temperature resistant silicone gaskets. Fully Automatic P.L C. based control system covering all parameters with facility for printing. Manual maintenance mode independent to P.L.C. Confirming to various international specifications. Precise chamber temperature control with temperature uniformity. Options like electrical steam generator, vacuum pump, carriage, trolleys, chart recorders, data loggers etc. EtO is used to sterilize items that are heat or moisture sensitive, especially when large loads are possible, in order to benefit to make product cost competitive IQ/OQ/DQ documentation(OPTIONAL).

• Certification: CE Certified
• Voltage: 220V, 240V
• Frequency: 50Hz, 60Hz
• Feature: Durable, Easy To Operate, High Performance
• Warranty: 1yrs, 3yrs, 5yrs
• Automation Grade: Fully Automatic, Semi Automatic
• Application: Labortary,Hospital
• Driven Type: Electric

• STANDARD DIMENSION :-: 600 600 1200 16/450

ETHYLENE OXIDE gas is a sterilizing agent at desired low temperature and moisture with good penetration power under desirable conditions. Ethylene Oxide sterilization is the effective method of sterilization.

• Certification: CE Certified
• Voltage: 220V, 240V
• Frequency: 50Hz, 60Hz
• Warranty: 1yrs, 3yrs, 5yrs
• Automation Grade: Fully Automatic, Semi Automatic
• Application: Medical
• Colour: Silver,Grey

• Certification: CE Marked
• Power: AC 220V / 50Hz
• Features: Portable design for low bench space,5 to 20 liters of chamber capacities,No specific installation required,Simple to use, just plug and operate,Aluminum or stainless steel construction,Fast sterilization approx. 20 min,Over pressure protection
• Operating Pressure: 15 PSI / 18 PSI
• Sterilization Time: 1 to 0.99 Minutes
• Construction: 304 Grade Stainless Steel / Aluminum
• Heating: Electric Heating, Optional Non-electric (Gas)
• Safety: CE Marked Pressure Valves,Lid Locks, Steam & vacuum release valve

• Material: Stainless Steel
• Features: Hydraulic operated lid, smoothly Closed lid, Heating is thermostatically controlled, Penetrate inner Chamber,
• Power Supply: 230 VAC / 50 Hz
• Product Code: 12E02

• Chamber Dimensions: 300 x 300 x 300 mm

All kinds of medical devices and instruments can be sterilized. Ideal for sterilization of heat moisture sensitive medical equipment and instruments ETO is the most effective, safe, fully validated and economical method of sterilization. Effective against all Micro-organisms, including resistant spores.Best in class Automation and latest SCADA software make remote control and monitoring of all cycle parameters possible. During Sterilization a Microprocessor PLC controls temperature, Moisture, Gas Injection, Gas Exposure and all critical time and pressure based parameters. Important sterilization parameters like Phase Status, Current Values & set values, continuously displayed at all times on Controller Screen & on Remote Computer via SCADA software.

• Type: Gas, Dry Heat, Pressure Steam Sterilization Equipments
• Brand Name: Adinath
• Port: Mumbai
• Lead Time: Depends On the Model
• Model Number: AETOS
• Supply Ability: 3 Unit/Units per Month
• Place of Origin: Gujarat, India

Description     Ethylene Oxide (EO or ETO) Gas is commonly used to sterilize objects sensitive to temperatures greater than 60°C and /or radiation such as plastics, optics and electrics. Ethylene oxide treatment is generally carried out between 30°C and 60°C with relative humidity above 30% and a gas concentration between 200 and 800 mg/l, and typically lasts for at least three hours. Ethylene oxide penetrates well, moving through paper, cloth, and some plastic films and is highly effective. ETO can kill all known viruses, bacteria and fungi, including bacterial spores and is compatible with most materials (e.g. of medical devices), even when repeatedly applied. However, it is highly flammable, toxic and carcinogenic.   Ethylene oxide sterilization is a chemical process consisting of four primary variables: gas concentration, humidity, temperature and time. Ethylene oxide is an agent that disrupts the DNA of microorganisms, which prevents them from reproducing. EO sterilization assures that a safe and sterile product will be delivered to the market each and every time.     Salient Features       Machine is suitable to Sterilize Surgical Medical Device products like I.V. Sets, Disposable Syringes, Disposable Surgical Set, catheter, Urine Bag etc.     ETO Sterilization reduce microbiological load and increase life span of material.     Modular construction of chamber.     Model is available from 0.5 Cubic Meters to 40 Cubic Metres.     Easy to operate.     Fully automatic operation based on PLC control.     Semi Automatic (Pneumatically Operated Ball Valve) Control.     Contact parts are SS 304 / 316.     Process time about 8 hours.     IQ/OQ/DQ documentation can be offered on demand. (OPTIONAL).     It is useful for prevention of micro biological contamination useful for treatment of spices, dried nuts, Foods Packed cereals etc.                                                                          

• Material: Stainless Steel
• Automation Grade: Semi Automatic
• Insulation Wall: Single Wall
• Brand Name: Aditya Pharma
• Chamber Volume (Litre): 10-15 Litre
• Orientation: Vertical

the dry heat sterilizer is used for the sterilization of glass ampoules, vials, containers and vessels in the pharmaceutical and biotechnology industry. Dry heat sterilization is also used for the sterilization of machine components. This dry heat sterilize equipment kills the microbial spore forms up to 12 log decrease. The dry heat sterilizer machine is useful for the sterilization of moisture sensitive materials like glass and metallic containers which can be sterilized using steam but cannot be depyrogenated. The machine is also known as glass container dry heat sterilizer because of its wide use for the dry sterilization of glass ampoules and vials. process of operation the washed vials or ampoules are placed in trays and loaded on the trolley. The trolley is moved on a transfer trolley to the sterilizing machine. The required settings of time and temperature is done by a digital control panel. The hot air is circulated by an impeller horizontally over the charge. The elements on the top heats the air and fresh air is entered into the system via a hepa filter module. The ampoule sterilizer machine has two pneumatically interlocked doors which one for the sterile and other for the non sterile room. The temperature during the sterilization is recorded on a circular chart recorder. A digital temperature scanner provides the validation of the system. salient features: silicon door gasket to ensure zero leakage during the operation optional plc based control panel body of machine is made of s.s. 304 material mineral wool insulation to optimize heat effectiveness temperature variation in the chamber is less then 5 deg c. equipped with hepa filter electronic digital controller and timer

• Automatic Grade: Semi Automatic, Fully Automatic
• Temperature Range: 121- 134 Degree Celsius
• Pressure Range: 5 To 20 psi
• Chamber Volume: 78- 360 Litre
• Insulation Wall: Triple Wall
• Mount Type: Floor Mounted Autoclave
• Power Consumption (KW): 6 KW- 18 KW
• Frequency: 50 Hz A.C

• Material: stainless steel
• Power: Electronic
• Model Number: VA02
• Port: India
• Packaging Details: Export packing
• Place of Origin: Haryana, India

Eto Sterilizer, eto cartridges, Autoclave Sterilizer

In most of the industries manufacturing the medical devices, sterilization is one of the important factors to be considered in terms of healthcare. Hence, ETO sterilizer or hospital sterilizer is been used for the process of sterilization of healthcare instruments and devices. There is a sealed chamber present where the products are been exposed to ethylene oxide gas under a vacuum. One of the main aim of using hospital sterilizer for such type of devices is a sterile and safe product is been delivered in the market every time. The equipment or the device goes under the process of ethylene oxide sterilization i.e. a chemical process that includes variables namely as temperature, time, humidity & gas concentration. Hence, the sterilization process takes place.

Dry Heat Sterilizers, Pp Standard Blue Filter Housing

Dry Heat Sterilizer, glass vial, Glass Bottle, Rubber Closure

laboratory sterilizers, laboratory agitator, Laboratory Dryers

Hot Air Sterilizer, Artificial Eyes, capsule hooks, iris hooks

Bottle Sterilizer, Ethylene Oxide Gas Cartridge

ETO Gas Cartridge, automation control panel, pure steam generator

Automatic Blister Packing Machine, Bag Filter, Kettle, Agitators, Vessel