Submersible Well Pump Dealers in Ahmedabad

We are offering openwell submersible pumps. Range motor power range from 0.50 hp through 5.00 hp pump sizes from 25 x 25 mm through 100x100 mm diameter rotors in copper as well as aluminium application motor shell in ss as well as ci application features all pumps centrifugal radial flow delivery & suction sizes commensurate with discharge all motors induction type & water cooled plug-in into 200v, 50 hz, ac power through suitable control panel plug-in into 400v, 50 hz, ac power through suitable control panel.

• Motor Phase: Three Phase
• Power Source: AC Powered
• Power: 0.5 HP- 7.5 HP
• Sub Section: 65mm, also available in 80mm

malhar submersible pumps are vertical , multi stage, centrifugal pumps with motor at the bottom & pump at the top. The water enters at the bottom of the pump and flows upwards through many stages. the stainless steel bronze impellers rotate inside the diffusers with inherent guide vanes. The diffusers direct water leaving each impeller towards suction opening of the next impeller, such a flow through each stage of impeller and diffuser combination adds pressure at each stage and finally water under high pressure is discharged through outlet at the top.   construction details motors are wet-type, water lubricated,water cooled rewindable squirrel cage induction asynchronous type capable of with standing wide voltage fluctuations. Specially designed tilting pad thrust bearings can with stand axial thrust loads with negligible wear. The stator is wound with water proof synthetic film insulated winding wires. Spring loaded seal rings , grommets & sand guard prevent ingress of water in to the motor. An elastic diaphragam compensates for variations in pressure of cooling water as it gets heated during functioning. the supply cables are protected by special stainless steel guards along the full length of the pump. malhar submersible pumps are manufactured as per is 8034 : 1989 with strict quality control for years of efficiency and reliable peration. Special design of the winding ensures efficient operation even high head and low voltages. Malhar pumps are available in both radial & mixed flow. The pump is multistage of superior hydraulic design for maximum performance and operating efficiency. The bowls are made of close grained cast iron for greater abrasion resistance. The impellers are of high quality graded bronze , dynamically balanced for best results. The stainless steel shaft is ground to close tolerances and guided by water lubricated gun metal bearings, provided in each bowl of impeller casing. Hydrostatic tests are conducted on each pump to ensure maximum discharge at selected heads variable voltage conditions. A stainless steel coupling is provided to couple the motor and pump.   application agricultural, industries, high rise buildings, fire fighting, sea water application. Etc. the material of construction for the complete range of submersible pumps is as follows:-

Openwell submersible Pumpsets are the products of the expertise gained from over two decades of experience, endurance and workmanship. Pragati products are engineered to perfection with utmost care and stringent quality control at all stages to ensure a trouble free service. Wide range of technically upgraded models of “Pragati” Openwell sub monoset have been very well accepted in the market and have been appreciated for its aesthetic look, easy availability and durability. These Openwell sub moonsets pumps are ideally suitable for where there are wide fluctuations in water level. This works under water and it rests at bottom of the well. Hence suction and priming problems do not arise. Pump volute chamber is designed to give the best possible hydraulic efficiency. Dynamically balanced impellers offers vibration free operation with long life. It is mandatory to install a Pragati Single phase moonsets with Standard Starting & Controlling Accessories (Panel)

Empowered with rich industrial experience and team, we are foremost Openwell Submersible Pump manufacturer, which is in cast iron construction. These are widely used in agriculture and domestic segment. Our offered Openwell Submersible Pumps that are highly durable bearing, energy saving and have excellent thermal reserve features. This Openwell Submersible Pump with the IS: 14220 and BIS standards, which have been possible to pass on with the support of the passionate team of the professionals. We are manufacturing these pumps using advanced facilities to make sure optimum quality of the product. These pumps are featured with dynamically balanced rotating parts that make sure minimum vibration during running. These pumps operate under water; hence no foot valve, no priming, no suction problems, or less possibility of burn-out of motor. Our pumps are designed for underwater applications and there is no need of foot valve and priming. Further, the pumps are having long life due to cast iron construction, water lubricated journal and thrust bearings, which are dynamically balanced with all rotating parts. Our pumps are designed to withstand wide voltage fluctuation. Features of Openwell Submersible Pumps Latest in design and Ultra modern All the units are thoroughly tested for field Superior design processes assure a longer life Very for easy installation Having high efficiencies which leads to energy saving. The components are made of selective materials Effective after sales services Applications of Openwell Submersible Pumps Rural and urban draining water installations Water supplies for high rise buildings Water circulating system for lawn and garden Agriculture lift sprinkler and drip irrigation Industrial service water supply schemes Decorative water fountains

• Type: Open Well Submersible Pump
• Certification: CE Certified, ISO 9001:2008
• Application: Agriculture, Domestic, Submersible
• Color: MUlticolor
• Voltage: 110V, 220V
• Fuel: Electric
• Theory: Centrifugal Pump
• Automatic Grade: Manual
• Power: 1-3kw
• Pressure: High Pressure
• Structure: Single Stage Pump
• Warrenty: 1 Year
• Country of Origin: India
• Brand Name: DELITE

• Pressure: High Pressure
• Warranty: 1year
• Advantage: Easy to Operate
• Usage: Industrial
• Performance: Optimum
• Speciality: Rust resistance

• Application: Agriculture
• Theory: Electromagnetic Pump
• Automatic Grade: Fully Automatic
• Power: 3-5kw, 9-12kw, etc
• Pressure: High Pressure
• Structure: Gear Pump
• Warrenty: 1 Year

• Type: Horizontal
• Number Of Stages: Single-stage Pump
• Motor Phase: Three Phase
• Motor Horse Power: 5.0
• Max Flow Rate: 300LPM
• Head: 35 MTR -112 FOOT
• Brand Name: Chetna
• Power Rating: 5 STAR
• Model Number/Name: CPV9-5.0

We are a noteworthy name when it comes to Borewell Submersible Pumps that is the perfect outcome of premium material and advanced processing techniques. Our pool of professionals keep close eye on the quality of the products so as to deliver the best in class range.

• Color: MUlticolor
• Automatic Grade: Automatic
• Power: 5 HP
• Power Source: AC Powered
• Pressure: Medium Pressure
• Motor Power: 5 hp to 150 hp
• Horse power: 5 hp to 150 hp
• Motor Horse Power: 5 hp to 150 hp
• Application: Industrial, Domestic, Agriculture
• Certification: ISO 9001:2008
• Voltage: 440V
• Discharge Outlet Size: 2 To 3 In
• Type: Submersible Pumps
• Fuel: Electric, Solar
• Theory: Centrifugal Pump
• Structure: Multistage Pump
• Warranty: 12 Months
• Country of Origin: India
• Head: 51 To 100 M
• Warrenty: 1 Year
• Motor Phase: Three Phase
• Maximum Discharge Flow: 100 - 500 LPM
• Number Of Stages: Multi Stage Pump
• I Deal In: New Only
• Installation/After Sales Service: No

• Voltage: 220V
• Certification: CE Certified
• Application: Industrial, Domestic, Agriculture, Submersible
• Pressure: Medium Pressure,High Pressure
• Power: 3-5kw
• Automatic Grade: Fully Automatic, Automatic, Semi Automatic
• Color: MUlticolor, MUlticolor
• Brand Name: Lubi, Shakti pumps

->Flow Range: up to 310 m3/h ->Head Range: up to 72 mtrs ->Rating (KW): 0.37 to 22.0 kW ->Power Supply: 1 Phase/3 Phase

• Country of Origin: India
• Number Of Stages: Single / Multi Stage
• Type: Water-filled / Borewell
• Motor Phase: Three Phase
• Head: As per requirement
• Maximum Discharge Flow: 501-1000 LPM
• Power Source: AC / DC
• Warranty: 12 months
• Discharge Outlet Size: 2 To 3 In
• Motor Horse Power: 1 - 20 Hp
• Application: Borewell
• Brand Name: SRI

Power Source Electric Motor Horsepower Less than 1 HP, 1 to 3 HP Maximum Discharge Flow 100 - 500 LPM, 501-1000 LPM Maximum Head Less than 15 m, 15 to 50 m Discharge Outlet Size Less than 25 mm, 25 to 50 mm, 51 to 100 mm Motor Phase Single Phase Brand Other Installation/After Sales Service No Material of Construction S.S. Body & C.I. Body Warranty 12 months Usage/Application Domestic , Agriculture Hariom Engimech Pvt. Ltd. (Colin Pumps Motors) provided Open well submersible pumpset 0.5 HP to 5 Hp in Single phase.

V7 Horizontal Monoset Openwell Pumps with S.S. Body in Single Phase-220 Volts & Three Phase-415 Volts in 50 Hz   By keeping track with the market development, we are offering optimum quality V7 Horizontal Openwell Pumpset that is used in agricultural, industrial, domestic & gardening purpose. Offered pumpset is manufactured using quality proven components and advanced technology with the quality standards. Moreover, our provided pumpset is highly appreciated in the market for its contemporary design and optimum operations. Clients can avail the entire range from us at pocket friendly prices. Features: Smooth finish Efficient performance Sturdy construction

Manufacturer and Exporter of Openwell Horizontal Monoset Submersible Pump.

We are offering varuna vertical open well submersible pumps are manufactured as per is: 14220. The high-grade cast iron material with unique hydraulic design gives better performance and efficiency.

Arvind Horizontal open well submersible pumps is well designed to work against wide voltage fluctuation. You select pumps as your requirement from its wide range of selection. Easy to install Pumps house is not required Priming is not required as motor is submerged in water . Noise free operation. Lesser electricity bills. Maintenance free operation.

• Number Of Stages: Multi Stage Pump
• Motor Horse Power: Less than 1 HP
• Application: Water Supply, Irrigation, Civil, Industrial, Fire Fighting
• Motor Phase: Single Phase
• Brand Name: Lubi
• Country of Origin: Made in India
• Material: Stainless Steel
• Pump Type: Borewell
• Head Size: 750 m
• Model Name/Number: LSJ/LSW/SLSJ/SLSW/LSKW/SRW Series
• Power Rating: 3.00 - 45.00 kW
• Flow Range: 78 m3/h
• Features: Wide range of pumps to match with different duty points. Lighter in weight which reduces installation cost. Better life in sand & other abrasives as well as sea water (salty) application.

• Type: Open Well Submersible Pump
• Application: Industrial
• Color: MUlticolor
• Voltage: 110V, 220V, 380V, 440V
• Fuel: Diesel, Electric
• Automatic Grade: Automatic, Fully Automatic, Manual, Semi Automatic
• Power: 1-3kw, 3-5kw, 5-7kw, 7-9kw, 9-12kw
• Pressure: High Pressure, Low Pressure, Medium Pressure
• Warrenty: 1 Year, 2 Years

• Head: 15 to 50 m
• Voltage: 200 - 440 Volts
• Application: Pumping water from wells, sumps and water-tanks,Water for gardening, sprinklers and conventional irrigation
• Brand: Kirloskar
• Model Name/Number: JVSA-0502 PUMPSET 80MM
• Power Rating: 5 HP
• Capacity: 120 to 960 LPS
• Features: Designed for underwater applications. No need of priming and foot valve,Easy installation - foundation and insulation platform or pump house not required,Can withstand wide voltage fluctuations from 200 - 440 V,CED coated cast iron components for rust fre

A Latteys Brand Bore well submersible pump is vertical multistage centrifugal pump closely coupled to an oil filled and cooled vertical ac single/three phase induction motor.A Latteys Brand Bore well submersible pumps are manufactured as per IS: 8034 Standard. As this unit is completely submerged in water, cavitation is totally avoided.     Feature :   Dynamically balanced rotor Totally enclosed,Oil filled, squirrel cage induction motor Food graded non conducted power oil CSR starting method for AC supply Stainless steel stator body Corrosion and abrasion resistant parts are made of stainless steel, high strength   engineering polymers and special alloy materials   Better slim design – Better Efficiency – Low power consumption Light weight – Ease in installation Silent running Reliable in operation     Applications :   Irrigation and Drip Irrigation Sprinkler, Gardening, Nursery and Bungalows High rise buildings & complexes Industrial water supply schemes Swimming pool, hospitals

• Type: Open Well Submersible Pump
• Application: Industrial
• Color: MUlticolor
• Voltage: 110V, 220V, 380V, 440V
• Fuel: Diesel, Electric
• Automatic Grade: Automatic, Fully Automatic, Manual, Semi Automatic
• Power: 1-3kw, 3-5kw, 5-7kw, 7-9kw, 9-12kw
• Pressure: High Pressure, Low Pressure, Medium Pressure
• Warrenty: 1 Year, 2 Years

• Winding Wire: Teflon Coated EC Grade Copper Wire
• Impeller: Cast Iron With Balancing
• Bush: LTB-4 Material
• Bearing: Ferado Sheet
• Shaft: S.S.410/EN8
• Sleeve: S.S.410
• Rotor: Copper/Alluminium
• Stamping: Silicon Steel/Carbon Steel
• Pump Seal: Oil Seal

• Adopter: Cast Iron
• Stage Casing: Cast Iron
• Impeller: SS 410
• Pump Shaft: SS 410
• NRV: Cast Iron
• Sleeve: SS 410
• Bearing Bush: Nitrile Rubber / LTB – 4
• Couple: SS 410
• Strainer: SS 202
• Fasteners: SS 410 / SS 202
• Upper Housing / Connecting Piece: Cast Iron
• Lower Housing: Cast Iron
• Motor Base: Cast Iron
• Rotor Shaft: SS 410 / SS 420
• Stator Tube: SS 202
• Thrust Bearing: SS 420
• Revolving plate: Carbon / Teflon
• Diaphragm: Nitrile Rubber
• Oil Seal: Nitrile Rubber & SS
• Fasteners: SS 410 / SS 202

• Motor Horse Power: 1 to 3 HP, 5 to 20 HP
• Motor Phase: Three Phase
• Power Source: Electric
• Application: Industrial, Agriculture, Domestic
• Warranty: 12 months
• Installation/After Sales Service: No
• Motor Speed (RPM): 2900(RPM)

• Type: Borewell
• Frequency: 50 Hz
• Motor Horsepower: 5 - 20 HP
• Motor Phase: Single Phase
• Power Source: AC Powered

Application Domestic water supply. Agriculture : For open well application, where water level is not steady. For lifting water from underground tank to overhead tank in flats. Housing complexes high-rise buildings. For water circulating system. For storage tank filling, Gardens, Hospitals, Garage etc.