Sump Pump Dealers in Kathwada, Ahmedabad

• Capaicty: Up to 300 M3/hr
• Head: Up to 35 mtr
• Discharge Size: Dn 25 to 125 mm
• Temperature: Up to 50c
• Speed: Up to 2900 rpm

• sump pump: 15000

Vertical Centrifugal process pump can be used in any installation or specially where the saving of space is important factor and most important where liquid is difficult to lift because of nature like temp , corrosiveness etc These pump are designed for use where the liquid handled to be is of highly corrosive Nature or where non � adherence of product or zero metallic contamination is must These pumps are equally ideal for continuous or intermittent service for handling Corrosive as well as ultra pure chemicals without fear of corrosion or contamination High Temperature services : Maximum working temperature is 110 C / 200 C. Length : Pumps lengths available from 1� to 12� with flow rate up to 50m3/h or 120 meter head. Higher capacities and head available on request and even multistage pump can be also made . Models : Available in conventional or tailor-made configuration. Several models such as suction extension with float switch, duplex pumping station with float switch (auto on/off device) also available. Special Features

• Pump Size: 25 mm. to 350 mm
• Discharge: 2 to 1400 m3/hr.
• Permissible Solid: 5 to 150 mm.

The easier automatic operation of the pump is possible with the use of the float switch or automatic level control unit. The pump is available in oil, grease and water lubrication system.

• Pressure: Up to 3.5 kg/cm2
• Capacity: Up to 300 m3/hr
• Head: Up to 35 mtr
• Discharge Size: Dn 25 to 125 mm
• Temperature: Up to 50oC
• Speed: Up to 2900 rpm
• Pump Length: Up to 3 mtr

Applications : Sulphuric Acid, Nitric Acid, HCL Transfer. Solvents, Diesel & Petrol Transfer. Light Slurries, Organic Chemical Processing. Water, Cooling Water, Effluent, Cleaning Product & Hydrocarbons. Zink & Copper Plant. Salt, Pharmaceutical, General Industrial Services etc.   Features : Designed to meet specific lengths & application requirements. Base plate designed to meet exiting support arrangements. Standardized & modular design. Standard shaft sealing by oil seal, mechanical seal or stuffing box packing. Connects the pump casing with the base plate. Column pipe protects the shaft. Supports the eventual intermediate bush bearings. Suction strainers, simple mounting & self priming. Optimized hydraulic performance. Compact design using less floor space. Close / Semi open impeller. Easy maintenance, replaceable parts. Heavy duty shaft, sleeve & bearings.   Materials : SS-316, SS-316 L, SS-304, SS-304L Duplex Stainless Steel Super Duplex Stainless Steel Cast Bronze, Cast Steel, Cast Iron Hastalloy - B & C, Alloy-20 etc.

In order to ensure the safety of the products, we carefully store the lot under hygienic conditions and safe environment. Moreover, the lot is stringently and regularly checked by the experts. To avoid any type of mechanical and biochemical harms, we pack our products in high-grade packing items that are sturdy as well. Moreover, we provide product details on it as well.   Features : Long functional life Non-interrupted performance Low operational cost Hydraulic efficiency Long Term Dependability Range sewage and Drainage Pumps Drainage Pit Pump Full Stainless Steel Sewage And Grinder Pumps Cast Iron Sewage and Sludge And Grinder Pumps

• Material of Construction: CS, SS, Alloy etc

The Centrifugal Vertical SumP Pumps we manufacture are vertically designed centrifugal single stage pump that has downward axial suction radial for direct discharge of flanged to the discharge pipe. The shaft is affirmed from its upper end with grease lubricated ball bearing lateral supporting of shaft which is obtained by radial bush bearing manufactured using anti-friction material. These pumps are used for lifting from in-tank / outside constructions along rivers, lakes, water sheds and others.   Applications: Circulation of industries water, acidic and acidic water in metal and sewage treatment plants, chemical waste water handling

• Size: 25 mm to 125 mm

We manufactured vertical pumps for the applications with low net positive suction head, cryogenic temperatures where vertical lift is required and in also in sump and cooling water services. Our vertical pumps is specially designed for service in water, chemicals, sewage and slurries. Vertical pumps are cover a wide range of hydraulic condition to meet virtually every pumping service in the industry and optimum efficiency.

• Type: Sump Pump
• Application: Ground Water Supply
• Color: Blue, Green, Grey, Orange, Red, White, Yellow
• Voltage: 110V, 220V, 380V
• Fuel: Electric
• Pressure: 0-10bar, 10-20bar, 20-30bar, 30-40bar
• Warranty: 1 Year, 2 Years
• Condition: New, Used
• Automation Grade: Automatic, Fully Automatic, Manual, Semi Automatic

• Pressure: Up to 6 kg/cm2
• Capacity: Up to 325 m³/hr
• Head: Up to 60 Mtr.
• Discharge Size: 25 mm to 125 mm.
• Temperature: Up to 60°C
• Speed: Up to 3500 rpm
• M.O.C.: C.I,C.S.,SS-304/304L, SS316/316, Bronze, Alloy-20, CD4MCU Hast alloy B&C, etc.

Vertical PP Sump Pumps, Award Trophies, Clock Momento, Bar Accessories