Surgical Equipment Dealers in Navrangpura, Ahmedabad

Obese people who have been advised to undergo bariatric surgery or liposuction have another option in our Non-surgical liposuction. This technology is completely non-invasive and is highly effective in removing subcutaneous fat.BLIZZ offers double frequency focussed-cavitation patent application in reducing subcutaneous fat and cellulite resulting in figure correction and body shaping. Classic 40 Khz focused cavitation combined with vacuum suction is safe and effective in reducing and removing fat and cellulite from areas like abdomen, hip, waist, thigh etc.

A pulse oxymeter is a medical device that indirectly monitors the oxygen saturation of a patient's blood (as opposed to measuring oxygen saturation directly through a blood sample) and changes in blood volume in the skin, producing a photoplethvsmograph. Automated trigger source and timing management provide continuous, consistent support for your patient.

Introducing a new electrical autoclave, with well equipped in infrastructure and team of experienced workers, we have been capable to serve our clients by offering high quality industrial autoclaves, absolutely in tune with their requirements. Use of premium grade material and state-of-the-art technology provide our products an incomparable identity. Our range of robustly constructed industrial autoclave is widely used in medical, pharmaceutical and agriculture industry. Our range consists of vertical autoclave, laboratory autoclave, medical autoclave, pharmaceutical autoclaves, sterilizer pressure cooker, high pressure sterilizer, laboratory sterilizer etc.Technical data:Ÿ Double walled construction outer M.SS.S. 304 & InnerŸ Lid made of S.S 304 heavy gauge die pressed, with handle, and tightening deviceŸ Equipped with pressure gauge, steam release valve & 2 Safety valveso o Ÿ Working Temperature: Ambient to 135 C, Accuracy: +-0.5 at 121 CŸ Controller: Microprocessor PID Multifunction controller (Adjustable)Ÿ Timer: Up to 12 hours2 o Ÿ Work pressure: 2.0KG cm at 132 C Gauge: 0-4Kg cm2Ÿ This instrument is supplied with S. S. perforated basketŸ Fitted with silicon rubber gasket joint lessŸ Power required is 230 Volts 50 Hz• Foot lifting arrangement to open lid

• Display Type: Dual Color LED
• Warranty: 12 Months
• Country of Origin: Made in India
• Feature: Portable, Digital
• Application: Hospital

• Material: Aluminum
• Voltage: 220 V
• Mounted: Rooftop
• Automation Grade: Automatic
• Height: 20 Inch

CPAC Equipment Inc. (CEI) is the largest manufacturer of Class II, dry heat sterilizers for the medical, dental, and ophthalmology markets. Dry heat sterilizers are the preferred method of sterilization for instruments that may rust, dull or corrode when sterilized with steam sterilizers. CEI offers the COX Rapid Heat sterilizer using a six minute cycle time or the Steri-Dent dry heat sterilizers. These sterilizers are ideal for general dentistry, orthodontic practices, ophthalmology, cosmetology, tattoo and pharmaceutical applications.

• Material: Plastic
• Color: Blue
• Country of Origin: Made in India
• Model Name/ Number: 3 in 1 Steam Vaporizer
• Items Included: Facial Mask - Water Container - Nose Spout
• Warranty: 220 V
• Adjustable Steam Control: No

• Material: Plastic
• Usage: Laboratory
• Brand: DMI
• Packaging Type: Box
• Number Of Holes: 9

Salient Features: Ideally portable slow suction for Paediatrics, Dentist, Ambulance, Camps etc. Oil free pump with Diaphram Technology. Low Power Consumption & noise free operation. Easy to carry unit. Works on Electrical powers with suction adjustable between 0-110 mm/Hg

Enables filtration, pre-heating, dearation, and precise dosing of media in the vessel within the dissolution bath, 21 litre media tank capacity allows filling of dissolution vessels for upto 3 dissolution tests (n=6), Batch degassing ensures inter-vessel degassing consistency Volumetric dispensing with an accuracy better than 1% as per USP, FDA and Ph. Eur. requirement, Special nozzle design allows the handling of surfactant and frothing media like Sodium Lauryl Sulphate (SLS), Programmable deaeration time, temperature and vacuum for effective deaeration of different media, Maintains media under vacuum at desired temperature while in idle condition, Virtually zero dead volume minimizes wastage of media, Programmable dispensing volumes from 200 ml to 4 ltrs, Fast filling of dissolution vessels at a dispensing rate of 900 ml min, Programmable rinse and cleaning cycle allows the instrument to run through a prevalidated self cleaning procedure, On- board memory stores 10 batch information of degassed media, Unparalleled versatility due to 1 ml volume change increments, 360 turning radius allows it to be maneuvered in tight places, Multifunction single hose for dispensing, aspirating, cleaning, rinsing and draining ensures no lifting of heavy media tanks, Ergonomically designed nozzle with embedded dispense switch for ease of operation, User friendly validation and calibration of media volumes.

We bring forth efficiently designed Pressure Gauge. Pressure Gauge is designed for CNG kit with level sensors. We offer Pressure Gauge in different specifications, to meet divergent demands of the clients. Our Pressure Gauge is tested, ensures efficient and accurate performance. We have made Pressure Gauge available at pocket friendly price.

• Material: WCB, WC1, WC6, WC9, LCB, LCC, LC3, C5, C12, CF8, CF8M, CF3, CF3M, CF8C, CN7M, CD4MCu, Hastelloy, Inconel, Duplex Stainless Steel
• Inlet Size: 1" x 2" through 10" x 12" ANSI Flanged
• Inlet Rating: ANSI Class 150# to 2500#
• Orifice Size: Sizes D Through T
• Temperature Range: -450º F to 1500º F
• Pressure: 5 to 6500 PSIG

Spring loaded safety relief valve Full lift pop type design Open bonnet with cap & liver Close bonnet with liver Close bonnet with cap Close bonnet with packed liver Metal seat Stallited nozzle & dics Soft seat with PTFE & Viton Bellows seal safety relief valve

Sensus Metering Systems safety relief valves offer an economical installation for large large relieving capacity applications such as gas distribution systems, metering sets, and industrial applications. The Model 250-S and 250-DW are angled body safety relief valve with a large exit area for a high flow rate. They incorporate a deep molded diaphragm that provides maximum lift while not affecting initial relief.   The Model 257-S features the same "roll-out" diaphragm principle with a double ported single valve that has achieved such remarkable success in the widely used 441-57S and 461-57S regulators. The roll-out diaphragm is a combination of strength and flexibility in which diaphragm action is constantly matched with spring action. This design offers large capacity, tight seat and reseat, sturdy construction, no adjustments, and easy servicing

We are instrumental in offering a sophisticated range of stainless steel stretchers. The top of these stretchers is developed using high-density sponge and plywood, whereas the frame is designed using stainless steel. Furthermore, the top of this stretcher can be easily detached and can be used as first aid board.

Girish Electrical Industries manufactures 'Girish Heat' brand alkali immersion heaters. These are made of chrome nickel sheathed heating element brazed to CI junction box for mounting on side of the vessel. 

The Transport Ventilator, delivered by us, has sturdy structure and convenient in use. With stern quality analysis of the raw materials and other inputs used, we make certain that the final product is absolutely free from defects. For this, we make use of the updated technology and machines. We have different payment options to choose from as per the convenience of the clients. In the type of operation processed online, the procedure depends on the gateway or processor model; both of them ensure complete security.

• Warranty: 1 Year
• Country of Origin: Made in India
• Display Type: Digital
• Frequency: 50 Hz
• Brand: KRUPA
• Intensity Range: 0 to 30 mA

• Brand Name: STERIMAC INDIA
• Capacity: 30-35 m3
• Size: 2.2*2.2*10 m
• Body Thickness: 10 Mm
• Design Pressure: 0.3-0.5 Mpa
• Working Pressure: 0.2-0.4 Mpa
• Design Temperature: 140 Degree
• Feature: High strength , Reasonable Prices , Sturdy construction

Bonzer Flat and Gusseted Reel is made with Medical Grade Paper and Transparent MultiLayer PET/PP Copolymer Film. The Inks used are water based. It is used for ETO and Steam Sterilization. 

We are main supplier of this product.

• Color: Transparant

• Type: Water Heaters
• Usage: Boiling Water
• Color: Blue, Brown, Green, Grey, Light White
• Voltage: 110V, 220V
• Condition: New
• Operating Type: Automatic, Fully Automatic, Semi Automatic
• Warranty: 1year
• Energy source: Electric

We are the main supplier of this product.

• Brand: BeneCheck
• Model Name/Number: Uric Acid Meter
• Usage/Application: Home/Clinic/Doctor/ Lab
• Number Of Strips: 25
• Shelf Life: 18 Months
• Pack Size: 25 Strips
• Material: Plastic

• Type: Electronic Stethoscope
• Warranty: 1yr

Features & Benefits : Quickly pinpoints noise and location of worn bearings & bushings noisy valves, broken, worn gear teeth db Meter has 7 sound level control settings – 60 dB to 120 dB for super sensitive noise pick-up and limited distortion of unwanted sounds Hi – Low setting on db Meter allows interpretation of sound easily dB Meter allows user to detect when battery is low Professional headphones shut out surrounding sound Non conductive microphone – will not zap expensive computer circuitry Flexible shaft reaches the tightest areas .

Owing to the vast experience of over 35 years in this domain, we become able to provide highly efficient Co2 Filling Machine along with decanting and liquid nitrous oxide filling machines in Gujarat. Our Co2 Filling Machine is useful to fill liquid carbon dioxide into cylinders. This machine has two weighing platforms as standard for easy operation, i.e., during filling of cylinder on platform one, operator can fix the cylinder on platform two and once filling is over on platform one, the machine automatically changes over and starts filling the cylinder on platform two, hence pressure developed in the line can be avoided. The cycle is repeated for further operation. Features PLC Based Control Panel User Friendly Data can be printed RS-232 Output Cumulative and Batch Records Key Board Calibration High Pressure SS 304 manifold with Evacuation Facility

we supply very top quality venturi masks at affordable rates. our main objective in business is to create a long term business relationship with our customers. we expect serious inquiries only .   Sincerely,

We are dealing in best Instant Electric Water Heater.

• Brand Name: S.Cure
• Type: Arm type
• Weight: 250g
• Country of Origin: Made in India
• Model Number: DG 4111
• Accuracy: 0.01 (pressure)
• Model Name/Number: DG 4111
• Usage/Application: Clinic
• Measurement Range (Pressure): 0mmHg