Swing Check Valve Dealers in Kathwada, Ahmedabad

• Size: Up to 36 Inch
• Brand Name: SYSCHEM
• Pressure: Up to 2500#
• Color: Customize
• Packaging Type: Graphoil/ PTFE/
• Design Type: Swing Wafer Design
• Media: Water, Sea Water, Oil & Gas
• Valve Size: Up to 36 Inch
• Model Name/Number: SYSCHEM
• Finishing Type: Paint
• Material Grade: WCB/ SS 304/ SS 316/ LCB/ ALLOY STEEL
• Warranty: 12 Months date of Installation & 18 Months the date of Supply
• Cover Type: Bolted

• Brand Name: K-TECH
• Material: CI, CS, SS
• Model Number: SCV (NRV)

Manufacturing Standard : BS 1868 Inspection And Testing Standard : API 598 Pressure-Temperature Rating : ASME B 16.34 Face to Face : ASME B 16.34 Butt Weld Standard : ASME B 16.25 Flanged End Dimension : ASME B 16.5 / ASME B16.47 / API 605 SPECIFICATIONS Rating: 150# to 600#, socket weld, screwed flanged end connection. Size: 1/2" to 12" Material: WCB, CF8, CF8M and special alloys (Available in cast steel and stainless steel).

• Pressure Rating: ASME - 800#
• Size Range: 10 NB through 50 NB
• Operation: Hand wheel

Disc is located on the seat that swings on a hinge. It contains bolted bonnet body. Large check valves are normally swing check valves. It is also available with compact model.

• Pressure Rating: ASME - 150#, 300#, 400#, 600#, 900#, 1500#, 2500#
• Size Range: 50 NB through 900 NB
• Type: Swing / Lift / Dual Disc / Wafer Disc
• End Connection: Flanged / Butt Weld / Wafer
• Operation: Automatic with Return Pressure
• Port Opening: Full
• Seat: Integral / Renewable / Weld Deposited
• Disc: Solid
• Gasket & Packing: PTFE / Graphite /  Spiral Wound / Ring Joint
• MOC: Refer Material Chart
• Design Code: BS 1868
• Testing: BS 6755 / API 598
• Inspection: 3rd Party / Client / Manufacturer

We are offering swing check valve. swing check valves bolted cover design, flanged end suitable for horizontal & vertical line shakti valves [nrv] are swing type and bolted cover construction. The one piece disc construction is securely fastened to the hinge by means of a lock nut & pin. The disc is free to rotating type to avoid any other wear. The hinge pin offers excellent wear resistance properties. swing check valves also can be supplied with titling disc design, dash pot arrangement and outside lever & weight design for use where control of the disc is desires. shakti also offer p.t.f.e. (pfa / fep) lined ball type/y type & rubber lined flap type check valves for high corrosive application. swing type check valve [non return valve] bolted cover, suitable for horizontal & vertical line design standard: bs 1868 size range - 1" to 12" pressure rating - 125# / 150# / 300# end connection : flanged end lift type check valve [non return valve] bolted cover, suitable for horizontal line only design standard: bs 1868 / din size range - 1" to 12" pressure rating: pn 6 / pn 10 / pn 16 / pn 25 / pn 40 end connection : flanged end forged steel lift check valve (non return valve) bolted cover type design standard: bs 5352 pressure rating: 800# / 1500# end connection : screwed / socket weld / butt weld end salient features : • body & cover made from high quality casting with liberal sections. The castings are precision machined for high performance. • body seat ring & disc machined to close tolerances providing smooth action and accurate seating. • seat ring screwed in to the body are replaceable type. Seal welded type seat ring & integral seat cab also be offered on special request. • stellited seat ring & disc also be offered on special request. • in built wear life for long duration in service. material of construction: cast iron : is 210 gr fg 200 cast carbon steel : astm a 216 gr wcb cast stainless steel : astm a 351 gr cf 8/cf 8m forged carbon steel : astm a 105 forged stainless steel : astm a 182 gr f304 / f316 design type : swing type disc / piston lift type disc end connection : screwed as per bsp/bspt/npt socketweld : as per ansi b 16.11 flanged : as per ansi b 16.5 pressure rating : asa 125#, 150#, 300#, 600#, 800#, pn 16 & pn 40 engineering option : gear operated, electrical actuated, size range : 15mm to 300 mm design & testing international standard: valve design : bs 5351 / ansi b 16.34 / api 6d pressure testing : bs 6755-i face to face : ansi b 16.10 flange drilling : ansi b 16.5 / bs 10 table / din / is 6392 butt weld end : ansi b 16.25 socket weld end : ansi b 16.11 screwed end : ansi b 1.20.1(bsp/npt)

• Material: ASTM Specifications
• MANUFACTURING STD.: Design
• BS 1868 / API 6D:  
• Face to face: ASME B 16.10
• Flanges: ASME B 16.5
• Butt welding: ASME 16.25
• Testing: API 598 / BS 6755 Part I / API 6D
• Trims: Varieties of combinations.
• Optional: By pass arrangement
• Dash pot / hydraulic non-slam arrangement.: Note
• RTJ Joints on request.: RTJ Body Bonnet Joints for ratings > 1500 lbs (standards)

We source only qualitative raw material from the reliable places only. Our professionals conduct strict quality checks as a result of which, finished products stand high on the clients' expectations. With the advancement of technology, we have also adopted a secure payment procedure that is easy to use and featured with multiple options.   Features : Excellent Performance Precise Design Easy Installation

Our LSC series swing check valves come with resilient seated, made with fusion bonded epoxy coating, which gives long lasting life

• Brand Name: Allines
• Place of Origin: Ahmedabad  
• Applications: Fertilizers & Agro Chemicals,Pharmaceutical Plants,Oil & Gas Industries,Cement Industries etc.
• Usage: To prevent the reversal flow through pipe lines
• Condition: New, Good
• Packaging: Bulk

Sand Casting Swing Check Valve is used to prevent the reversal flow through pipe lines. The Sand Casting Swing Check Valve is used only for upward or horizontal flow. Moreover, the Sand Casting Swing Check Valve offers low resistance to flow and is particularly suited to low velocity services. We are a prominent Sand Casting Swing Check Valve Manufacturer, Exporter and Supplier based in India. Swing Type Disc : Disc is opened by line velocity and the resultant pressure. When the flow stops, the disc is closed by gravity. Seating load and resultant tightness are depends up on the back pressure. Outside lever and counter weight design : Objects of the lever and weight are either to balance the disc or give it added weight. Unbalancing the disc the valve will open with a minimum pressure. When the disc is weighted the valve will be sensitive to reversal of flow.Dashpot Arrangement : In case of intermittent use or in presence of thrusts, dash-pot design is highly recommended. In such instance the dash-pot design gradually causes the opening and closing of disc preventing, therefore dangerous shocks. Options : Ring joint Facing available on request By – Pass and drain plug design available on request Satellited / Hard face Seatings available on request Actual X- Ray of valves provided on request Applications : Pharmaceutical Plants Fertilizers & Agro Chemicals Petro Chemical Industries Steel Plants Oil & Gas Industries Paper Industries Petroleum Refinery Cement Industries Thermal Power Plants Cryogenic Services

• Material: Carbon Steeel, Stainless Steel
• Application: Non Return Flow
• Pressure: High Pressure
• Size: 50 mm to 600 mm
• Ends: Flanged End
• Testing Standard: API 598, ISO 5208

We offer our esteemed clients, Swing Check Valve. The Swing Check Valve is manufactured by our qualified engineers, using sophisticated technology and high quality raw material. The Swing Check Valve are in compliance with the latest international standards in terms of quality. The Swing Check Valve is available in a vast range of specifications, grades and sizes Features Sturdy construction High efficiency Corrosion resistant Economical

• Material: PP
• Application: Water Fitting
• Feature: Durable, Investment Casting
• Automatic Grade: Automatic
• Pressure: Medium Pressure
• Number Of Way: 2way
• Pattern: Plain

Nivz Check Valves type combines a simple but robust construction with reliability. They are specially designed and developed for applications where a low pressure loss is essential. Nivz Wafer Type Swing Check Valve has short face to face dimensions and low weight allows a simple space saving installation between the companion flanges. The valves are suitable to mounting between weld neck or slip on plate type companion flanges of different standards. The short face to face dimensions and the low weight guarantee a simple and space saving installation between the bolts of the connecting flange. The eccentric disc shaft connection in combination with the disc seat guarantees positive shut-off of the returning medium. Wafer check valves are becoming the preferred type of check valve for most applications, due to their compact design and relatively low cost. Nivz Valves a leading Wafer Type Swing Check Valve Manufacturer, Flangeless, Sandwich Type, Single Plate Check Valve Exporter, Stockist, Supplier Wafer Type Check Valve also can avialble with Spring Loaded version on spcific request.

Wafer swing Check Valves type combines a simple but robust construction with reliability. They are specially designed and developed for applications where a low pressure loss is essential. J.D. Wafer Type Swing Check Valve has short face to face dimensions and low weight allows a simple space saving installation between the companion flanges. The valves are suitable to mounting between weld neck or slip on plate type companion flanges of different standards. The short face to face dimensions and the low weight guarantee a simple and space saving installation between the bolts of the connecting flange.

• Size: CLASS
• 1/2"NB to 16" NB: 150#
• 1/2"NB to 14" NB: 300#
• 1" NB to 12" NB: 600#
• 2" NB to 10" NB: 900#
• 2" NB to 8" NB: 1500#
• 2" NB to 8" NB: 2500#
• Value Size DN: Test Duration(sec)
•  : SHELL
• SEAT: DN < 50
• 15: 15
• 50 <DN < 150: 60
• 60: 150 <DN < 300
• 120: 120
• 350 <DN: 300

Swing Check Valves, Paper Lamination Plant, Swing Check Valves

wafer swing check valve, wafer type center disc butterfly valve

One of the leading best Swing Check Valves supplying company.

Mantle & Concave, Loader Hydraulic Cylinder

pneumatic control valve, High Pressure Ball Valves, Strainers, CS valve

Swing Check Valves, Screwed Bush, Male NPT Branch Tee, Male NPT Run Tee

Swing Check Valves, gun metal steam valves, ic globe valve

wafer swing check valve, Gun Metal Gate Valve, Gun Metal Globe Valve

Forged Steel Gate Valves, Forged Steel Globe Valve`, ASA Globe Valve