Swing Check Valve Dealers in Odhav, Ahmedabad

• Brand Name: Allines
• Place of Origin: Ahmedabad  
• Applications: Fertilizers & Agro Chemicals,Pharmaceutical Plants,Oil & Gas Industries,Cement Industries etc.
• Usage: To prevent the reversal flow through pipe lines
• Condition: New, Good
• Packaging: Bulk

Sand Casting Swing Check Valve is used to prevent the reversal flow through pipe lines. The Sand Casting Swing Check Valve is used only for upward or horizontal flow. Moreover, the Sand Casting Swing Check Valve offers low resistance to flow and is particularly suited to low velocity services. We are a prominent Sand Casting Swing Check Valve Manufacturer, Exporter and Supplier based in India. Swing Type Disc : Disc is opened by line velocity and the resultant pressure. When the flow stops, the disc is closed by gravity. Seating load and resultant tightness are depends up on the back pressure. Outside lever and counter weight design : Objects of the lever and weight are either to balance the disc or give it added weight. Unbalancing the disc the valve will open with a minimum pressure. When the disc is weighted the valve will be sensitive to reversal of flow.Dashpot Arrangement : In case of intermittent use or in presence of thrusts, dash-pot design is highly recommended. In such instance the dash-pot design gradually causes the opening and closing of disc preventing, therefore dangerous shocks. Options : Ring joint Facing available on request By – Pass and drain plug design available on request Satellited / Hard face Seatings available on request Actual X- Ray of valves provided on request Applications : Pharmaceutical Plants Fertilizers & Agro Chemicals Petro Chemical Industries Steel Plants Oil & Gas Industries Paper Industries Petroleum Refinery Cement Industries Thermal Power Plants Cryogenic Services

The material required for preparing quality-centralized product range is sourced from the trusted places and that too after complete quality confirmation. Courtesy years of experience, our company has emerged as leading suppliers of PFA Lined Swing Check Valves.

• Size: 50-100mm, 100-150mm, 150-200mm, 200-250mm, 250-300mm, 300-350mm, 350-1050mm
• Packaging Type: Box
• Speaciality: Investment Casting, Sand Casting
• Usage: Oil Fitting, Gas Fitting, Petrochemicals
• Type: Cast Steel
• Brand Name: ROYAL
• Material: Mild Steel
• Certification: ISO 9001:2008 Certified

Cast Steel ASTM A216 Gr WCB Check Valve Swign Type Flange End 300#  Size Range from 2" - 42"  

• Brand Name: K-TECH
• Material: CI, CS, SS
• Model Number: SCV (NRV)

Manufacturing Standard : BS 1868 Inspection And Testing Standard : API 598 Pressure-Temperature Rating : ASME B 16.34 Face to Face : ASME B 16.34 Butt Weld Standard : ASME B 16.25 Flanged End Dimension : ASME B 16.5 / ASME B16.47 / API 605 SPECIFICATIONS Rating: 150# to 600#, socket weld, screwed flanged end connection. Size: 1/2" to 12" Material: WCB, CF8, CF8M and special alloys (Available in cast steel and stainless steel).

• Material: PP
• Application: Water Fitting
• Feature: Durable, Investment Casting
• Automatic Grade: Automatic
• Pressure: Medium Pressure
• Number Of Way: 2way
• Pattern: Plain

Our LSC series swing check valves come with resilient seated, made with fusion bonded epoxy coating, which gives long lasting life

• Size: 25mm To 300mm
• Application: Non Return Flow
• Pressure: High Pressure, Medium Pressure
• Testing Standard: API 598, ISO 5208
• Operation: Auto
• Temperature: -05 to 80 DegC

We are comfortable with traditional payment options as well as the modern ones. It is Supplier & Manufacturer of Knife Swing Check Valve. Our payment related policies are client friendly. Our payment procedures are transparent, safe, and secure. We follow strict quality procedures that are as per the guidelines, help us in presenting dependable and cost-effective product range. Our super durable swing check valves are available in a quality warranty of 24 months.

• Size: Up to 36 Inch
• Brand Name: SYSCHEM
• Pressure: Up to 2500#
• Color: Customize
• Packaging Type: Graphoil/ PTFE/
• Design Type: Swing Wafer Design
• Media: Water, Sea Water, Oil & Gas
• Valve Size: Up to 36 Inch
• Model Name/Number: SYSCHEM
• Finishing Type: Paint
• Material Grade: WCB/ SS 304/ SS 316/ LCB/ ALLOY STEEL
• Warranty: 12 Months date of Installation & 18 Months the date of Supply
• Cover Type: Bolted

  Detail:SWING CHECK VALVE INVENT makes heavy duty all type of CHECK VALVE, with all type of ends like Fanged End,Butt Weld, Screwed End,Socket End(Only in forged valves). We are also Providing the extra attachment As per Our Client Requirement like Actuator,Live Loading Arrangement,Locking Arrangement,Limit Switch Arrangement,Position Indicator ,Vacuum Seal,Gear Box, We are providing the most Advance Design features to be ultimate in dependable and economic flow control.INVENT makes all types of check valve including Lift Check Valve,Dual Plate Check Valve,Wafer Type Check Valve   DESIGN FEATURES:- ** DESIGN AND MANUFACTURING:-  BS 1868 ** Inspection And Testing :- API 598,BSEN 12266 PART -1 & 2 **End Flange Dimension:- ASME B 16.5 (FOR  NPS

These types of valve (Non Return Valves) are used to stop back flow to the upstream side of the valve. The design of Check Valve (Non Return Valve) is very simple. A hinged door is placed inside the Swing Check Valve body. With the pressure coming upstream the door is held open; when pressure increases on the downstream side, it forces the door to valve close, stopping any back flow. Mostly all pump discharge line check valves being used. Swing type check valve is performing in vertical and horizontal both line. Lift check valve have have vertical and horizontal both type of design to suit as per line. Nivz Flanged End, 150# & 300# Check Valves are Swing Check type and the 800# class check valves are Piston Type Lift Check Valves. The piston type valve works up and down providing a strong, firm seal under high pressure conditions.Nivz all check valves are self actuating type. Nivz Valves & Automation manufacturing & exporterting of variety of Industrial Check Valve (Non Return Valve) to suit various industrial application and requirments. Our range also cover Steam Jacketed Swing Check Valve, Full Jacketed Non Return Valve for molten sulphur, asphalt, coltar, bitumen etc for any sticky and viscous media. Nivz make Double Flanged End Swing Type Check Valves - Non Return Valve are Swing type disc and Bolted cover design Construction. The one piece disc body construction is securely fastened to the hinge by means of a lock nut & pin. The Disc is free to rotating type to avoid any other wear. The hinge pin offers excellent wear resistance properties. Swing Check Non Retrun Valves also can be supplied with Titling disc design, Dash pot arrangement and outside lever & weight design for use where control of the disc is desires. Swing Non Return Valves can be mounted on Horizontol & Vertical both line. Nivz Valves & Automation also manufacturing P.T.F.E. (PFA / FEP) Lined Ball Type / ”Y” Type & Rubber Lined Flap Type Check Valves for high corrosive application. We have facility at our works for supplying of valves with 3rd Party Inspection i.e. Bureau Veritas  / BV, TUV, DNV, SGS, IRS, PDIL, LLOYDS, TATA and others on request. An ISO 9001 certified quality Swing Type Check Valve Manufacturer, NRV, Swing Type Non Return Valve, Exporter, Supplier, Stockist. Duplex Steel, Super Duplex Steel, Alloy 20, Hastelloy C22, C276, Austenitic Stainless Steel Material Check Valve Manufacturers. Salient Features of Swing Type Non Return Check Valve Body & Cover made from high quality casting with liberal sections. The castings are precision machined for high performance of valve. Bolted Cover design Body Seat Ring & Disc machined to close Tolerances providing smooth action and accurate seating. Seat Ring sealweld to the body Replaceable (Renewable) type Seat Ring & Integral Seat can also available on special request. Stellited Hard Face F6 Seat Ring & Disc also supply on requirement. All the disc have double lock nut or cotter pin fixed In built wear life for long duration of service.

Wafer swing check valve Special Features Like Stelliting, Shorter overall length, mounting requires minimum space. Seat Leakage : Zero Leakage, Tight Shut Off.

• BODY MATERIA: CAST IRON, CAST CARBON STEEL
• DESIGN: SWING TYPE FOR VERTICAL POSITION, JACKETTED.
• ND CONNECTION: FLANGED END, RTJ.
• PRESSURE RATING CLASS: ASA 150, 300, 600, 900, 1500, 2500, BS 10       TABLE D, E, F, H, ND 16 & ND 40.
• SIZE RANGE: 15mm TO 400mm

• Size: 2" TO 18"
• CLASS: 150# / 300# / 400# / 600#
• END: FLANGED
• STANDARD: API 6D / BS 1868
• FIRE SAFE: API 6FD
• MOC: WCB / CF 8 / CF 8M / CF3 / CF 3M / CN 7M
• OPERATION: NON RETURN VALVE

SEALMECH Check Valves are Bolted cover design up to 600# and above pressure seal design. SEALMECH Swing check valves are suitable for vertical and horizontal both line. A SEALMECH wide range of Check Valves (Non-Return Valves) available for oil, gas, water, refining, power and chemical applications, where the prevention of flow reversal is mandatory.

We are listed at the apex in the list of the most dependable Horizontal Swing Check Valve Manufacturers in India. The unmatched quality and inexplicable performance of the Swing Check Valve in respective applications has played a vital role in the enhancement of the demand. The use of optimum quality materials in the manufacturing of the Steel Swing Check Valve also ensure notable features like high durability, strength and resistance to corrosion. Additionally, customers are also ease with the availability of the Swing Check Valves in various sizes and dimensions.

Features STARTEK Cast Steel Check Valves have been designed to meet the requirements of BS1868/ASME 816.34 /API 6D -15014313 Face to Face and End to End dimensions conform toASME B16.1011SO 5752 / BS 2080/ DIN End flange dimensions conform toA SME 816.5/1507005-1/API 6051BS 3293 / DIN Buttweld end dimensions conforrn toASME B16.25 The Seat-rings are cylindrical bottom seated type having ample cross section for strength are provided with welded in and threaded Seat-rings will be supplied on request. In case of SS valves the Seat-rings are integral to Body The Body to Bonnet joint is a male & female in ISO PN 20, PN 50 & PN 110 / ASME 150#, 300# & 600# valves and ring joint is used in higher classes Valves meet the requirements of fugitive emission levels Shell category B as per MESC SPE 77/312 Option Tilting disc design available Check Valves can be supplied with counter weight or dash pot arrangement Full opening, piggable design available

We are offering Swing Check Valve. Technical specifications : design : swing type for vertical position body material : cast iron, carbon steel (astm a 216 gr. Wcb, forged carbon steel (astm a 105), cf8 (ss 304), cf8m (ss 316), cf3m (ss 316l), ss 202, alloy steel & others.end connection : screwed (threded), socket weld, flanged end, butt weld end.pressure rating class : asa 150, 300, 600, 800, 900, 1500, 2500, bs 10 table d, e, f, h,size range : 15mm to 400mm

Wafer swing check valve its simple and compact design, it requires minimum installing space. It can be installed vertically or horizontally. We offer alternate materials for different applications. It is available with standard as well as customized configuration.

We are offering swing check valve. swing check valves bolted cover design, flanged end suitable for horizontal & vertical line shakti valves [nrv] are swing type and bolted cover construction. The one piece disc construction is securely fastened to the hinge by means of a lock nut & pin. The disc is free to rotating type to avoid any other wear. The hinge pin offers excellent wear resistance properties. swing check valves also can be supplied with titling disc design, dash pot arrangement and outside lever & weight design for use where control of the disc is desires. shakti also offer p.t.f.e. (pfa / fep) lined ball type/y type & rubber lined flap type check valves for high corrosive application. swing type check valve [non return valve] bolted cover, suitable for horizontal & vertical line design standard: bs 1868 size range - 1" to 12" pressure rating - 125# / 150# / 300# end connection : flanged end lift type check valve [non return valve] bolted cover, suitable for horizontal line only design standard: bs 1868 / din size range - 1" to 12" pressure rating: pn 6 / pn 10 / pn 16 / pn 25 / pn 40 end connection : flanged end forged steel lift check valve (non return valve) bolted cover type design standard: bs 5352 pressure rating: 800# / 1500# end connection : screwed / socket weld / butt weld end salient features : • body & cover made from high quality casting with liberal sections. The castings are precision machined for high performance. • body seat ring & disc machined to close tolerances providing smooth action and accurate seating. • seat ring screwed in to the body are replaceable type. Seal welded type seat ring & integral seat cab also be offered on special request. • stellited seat ring & disc also be offered on special request. • in built wear life for long duration in service. material of construction: cast iron : is 210 gr fg 200 cast carbon steel : astm a 216 gr wcb cast stainless steel : astm a 351 gr cf 8/cf 8m forged carbon steel : astm a 105 forged stainless steel : astm a 182 gr f304 / f316 design type : swing type disc / piston lift type disc end connection : screwed as per bsp/bspt/npt socketweld : as per ansi b 16.11 flanged : as per ansi b 16.5 pressure rating : asa 125#, 150#, 300#, 600#, 800#, pn 16 & pn 40 engineering option : gear operated, electrical actuated, size range : 15mm to 300 mm design & testing international standard: valve design : bs 5351 / ansi b 16.34 / api 6d pressure testing : bs 6755-i face to face : ansi b 16.10 flange drilling : ansi b 16.5 / bs 10 table / din / is 6392 butt weld end : ansi b 16.25 socket weld end : ansi b 16.11 screwed end : ansi b 1.20.1(bsp/npt)

• Material: ASTM Specifications
• MANUFACTURING STD.: Design
• BS 1868 / API 6D:  
• Face to face: ASME B 16.10
• Flanges: ASME B 16.5
• Butt welding: ASME 16.25
• Testing: API 598 / BS 6755 Part I / API 6D
• Trims: Varieties of combinations.
• Optional: By pass arrangement
• Dash pot / hydraulic non-slam arrangement.: Note
• RTJ Joints on request.: RTJ Body Bonnet Joints for ratings > 1500 lbs (standards)

• Pressure Rating: ASME - 150#, 300#, 400#, 600#, 900#, 1500#, 2500#
• Size Range: 50 NB through 900 NB
• Type: Swing / Lift / Dual Disc / Wafer Disc
• End Connection: Flanged / Butt Weld / Wafer
• Operation: Automatic with Return Pressure
• Port Opening: Full
• Seat: Integral / Renewable / Weld Deposited
• Disc: Solid
• Gasket & Packing: PTFE / Graphite /  Spiral Wound / Ring Joint
• MOC: Refer Material Chart
• Design Code: BS 1868
• Testing: BS 6755 / API 598
• Inspection: 3rd Party / Client / Manufacturer

We are one of the widely recognized Suppliers of Swing Check Valves based in India. We provide a wide variety of Swing Check Valves such as Steel Swing Check Valves and Steel Swing Check Valves. They are developed in manufacturing standard BS 1868 and API 6D. Our Swing Check Valves are provided in sizes 25 MM to 500 MM. We provide Swing Check Valves in various End Connections such as Flanged End, and Butt weld End. The pressure ratings of our valves are available in the ranges from 150# to 600 #. In addition, we provide Bolted Bonnet Type Swing Check Valves at the most economical rates. Size :- 25 MM to 500 MM Pressure Rating :- 150# to 600 # End Connection :- Flanged End, Butt weld End. Manufacturing Standard :- BS 1868 /API 6D Type :- Bolted Bonnet. Click here for more details

Forged Steel Gate Valves, Dual Plate Check Valve, Lift Check Valve

Double Gland Pulp Valve, GLOBE VALVE, FLANGED END, Jacketed Valve

One of the leading best Swing Check Valves supplying company.

Swing Check Valves, FULL LIFT SAFETY VALVE, HIGH LIFT SAFETY VALVE