Tablet Coating Machine Dealers in Ahmedabad

• Weight: 100-500kg
• Color: Black
• Voltage: 220V
• Automatic Grade: Manual
• Power: 1-3kw
• Driven Type: Electric

Automatic Coating System have been designed after a careful study of the needs of expert coaters such as Rotational Speed, Efficient AHU system, Inlet & Exhaust air CFM & efficient solution spraying system etc. to supplement the need of  correctly designed, versatile coating system.   The Coating System has very heavy & sturdy structure, made from SS304 pipes & sheets. Complete structure covered from outside. Processing Chamber designed with sealed from all side, in which negative pressure can be achieve. Chamber with 02 nos. of covers with hinges provided on two sides (left & right) of the structure to clean and remove / replace the pan. In the process of automatic coating of tablets the coater needs perforated pan with drive and mounting facility in the chamber. Chamber with facility of wash water drain port with manually operated ball valve. Motor with worm reduction gear unit and a bearing housing with shaft for pan drive. Variable Frequency drive for variable speed of pan. Inlet air & exhaust air duct with butterfly valve and Open – Close type pneumatic actuator, inside the chamber. A FLP lamp at top of the chamber. Spray nozzle mounting facility at chamber. Perforated pan made from 10 SWG, SS316 material and polish to the mirror finish from inside & outside, with baffles & tablet unloading attachment. AHU with pre filters, inlet air blower, cooling coil, phase & by pass system, heating coil, micro V & HEPA filters with temperature sensor and Rh Sensor (OR Dew point sensor – Optional) & exhaust air blower. Inlet and outlet air duct. Exhaust air blower Solution preparation vessel with spraying system.   SPECIAL FEATURES: Pan fabricated from 2.5 mm thick, SS Sheet of SS 316 quality with 3.0 mm perforation at 4.5 mm triangle pitch for adequate opening area for better performance. 12” & 24” model are on wheel & 36”, 48” & 60” model with Anti vibrating unit provided for proper leveling, hence no requirement of foundation. Double wall PUF insulated APU (AHU) with Aluminum Framing, inside aluminum or G.I. sheeting from Air Inlet to HEPA filter and SS sheeting from HEPA filters to onwards, outside powder coated galvanized sheeting, with Pre filters and Micro V filters in G.I. or Aluminum Box, Air inlet Blower, HEPA filter in SS Box, Cooling coil in copper tube and aluminum fins, Phase and By pass damper & Heating Coil made out of SS Tube & Aluminum Fins. (If steam heated model) and electrical heaters (if electrically heated model). Rh Sensor at air inlet line. Differential Pressure Gauge at HEPA Filter. Differential Pressure Gauge at Process Chamber. Inlet air, Product Bed & Exhaust air temperature Sensor. Variable Frequency Drive for (AC Drive) Pan Drive Motor, Inlet Air & Exhaust Air Blower. Pan RPM Indication facility. FLP Lamp. Port with Spray Ball for CIP. Inlet Air Blower. Exhaust Air Blower. Solution Preparation Vessel with propeller type stirrer with variable rpm facility. (Plain – Non Jacketed – Non FLP Model). Pan Drive Motor flameproof. Spraying Nozzle. Peristaltic Pump. Manually operated Atomizing Air Pressure Regulator & Fan Width Pressure Regulator. Butterfly Valve at Inlet & Exhaust air duct with Actuator. PLC based power panel with Touch Screen based operating panel. Inlet & Exhaust air duct   OPTIONAL (IF REQUIRED): Pan made out of SS 316 or SS 316 L Material instead of SS 304 Material Dew Point Sensor at inlet air duct, instead of Rh sensor. Velocity Trans-meter at inlet & exhaust air duct. Differential Pressure Trans-meter at AHU & Process Chamber, instead of D.P.G. Differential Pressure Gauge) Jacketed Vessel instead of none jacketed. (For Solution Preparation). Flameproof Model Vessel for Solution Preparation. Flameproof Motor at inlet & Exhaust air blower. Wet Scrubber at exhaust air. Steam & Chilled Water Controlling Valve. Peristaltic Pump Spray nozzle of spraying system Flow meter at solution spray system Atomizing Air Pressure Regulator & Fan Width Pressure Regulator operating through Touch Screen. Flameproof/Weatherproof Enclosure for TouchScreen. Additional Duct per 1 Meter – None insulated. (For Inlet & Exhaust air). Tablet Discharge Spout Additional Pan Pan unloading Trolley

High Efficiency and Intelligent Film and Sugar Coating Technology+ TabsCoat-M Tablet Auto Coater for R & D and pilot Scale manufacturing is designed for the application of Film Coating & Sugar Coating. TabsCoat–M is a product line of compact self-contained laboratory coating system with interchangeable pan

• Type: Coating Machine
• Brand Name: CEMTECH PHARMA MACHINERY
• Condition: New
• Warranty: 1 Year

The organization is supported by systematized packaging system which assists us in meeting the specific packaging requirements of the clients with ease. Also, we ensure zero damage to the products. We have invested a large amount for developing all-the-in-house storage facility that is managed and maintained by our diligent professionals. Also, it keeps us free from stock-out situations. Feature:- The Sturdy main Structure is made of the base plate of M.S. havins S.S. cladding and S.S. square pipes. The Directly coupled electric motor and gear box The coating pan is directly mounted on gear box shaft with the angle of 300 S.S. 304 is used to fabricate the coating pan The Temperature controller is provided with the hot air blower for the adequate heating  One seprate electric control panel Seprate Polishing pan We can Provide on Demand:- The Detacheble baffles or fixed baffles can provide for the uniform tablet finish. The AC variable frequency drive for the main motor drive  

Application & Process: The Bhagwati's advanced high efficiency automated tablet coating machine is mainly used in pharmaceutical and food industries. Featuring mechatronis and confirming to the requirement of cGMP. It is a high efficiency, energy saving, safe and clean equipment for film and sugar coating of tablets, Pills and candies with organic film, aqueous coating and sugar film etc. Automatic Tablet Coater is designed for the application of: Film Coating with organic solvent, Enteric Coating and aqueous coating Sugar Coating Working Principle: The tablet to be coated make continuous complicated orbital motion the closed rotating Drum under the action of a streamline of Baffles. During the motion coating medium automatically sprays according to the technological process and rational technological parameters, at the same time hot filtered air supplied under a negative pressure. The hot air penetrates through the tablets core layers and is discharged from the bottom of the layers, so that the coating medium sprayed on the surface of the tablet cores will dry rapidly and evenly, thus forming a solid and smooth surface film on tablet. The whole process is finished under the automatic by PLC Controls with touch screen Interface.

• After-Sales Service Provided: Engineers available to service machinery overseas
• Hot air blowing system is: with temperature control probe.
• COATING PAN: SS 304 / SS 316
• Place of Origin: Gujarat, India
• Port: MUMBAI ( INDIA)
• Supply Ability: 30 Set/Sets per Month
• Lead Time: Shipped in 45 days after payment
• Packaging Details: EXPORT QUALITY TREATED WOODEN PACKING
• SIZE: 30
• Model Number: FALCON/CM
• ENCLOSED MACHINE DRIVE: HOT AIR BLOWING SYSTEM

• Type: Tablet Coating Machines
• Weight: 100-500kg
• Color: Silver
• Voltage: 110V
• Automatic Grade: Semi Automatic
• Power: 1-3kw
• Driven Type: Electric
• Material: Stainless Steel

Salient Features:   Pan is made by SS 304 (SS 316 optional). Totally enclosed with MS cladding with a standard gearbox, motor, and hot air blowing arrangement. Designed with M.S. fabricated structure and all arrangement except electric control, and SS Pan is inside the enclosure, which makes simple cleanable outside covering. 30”, 36”, 42” or 48” Coating Machine has variable speed drive. Hot air blowing system is separate. 60” or 72” Coating Machine has two speeds with step pulley without hot air blowing system.

We cater the best quality Tablet Coating Machine in the international market. Our Automatic Tablet Coating Machine is used for applying a layer of coating on tablets and capsules quite efficiently. They are highly durable and easy to operate. In addition, we are one of the principal High-Efficient Tablet Coating Machine Suppliers in India.

• Weight: 250 Kg
• Model Name/Number: VLTCM
• Usage/Application: Used for sugar & film coating in Pharma & confectionery industries
• Capacity: 2 to 80 kg
• Material Grade: SS316L
• Blower Motor: 2HP
• Dimension: L- 1520 X W-1150X H- 1755 In mm.
• Heating Power: 3 Phase
• Max. Output: 3 to 80 Kg
• Brand: Venus Machinery

• Voltage: 415 V
• Power: 8 Kw
• Model: Innovative
• Capacity (kilogram): 500 Kg
• Material: Stainless Steel
• Frequency: 50 Hz
• Phase: 3 Phase

• Usage/Application: Industry
• Features: Low maintenance , Cost effectiveness. Its ease of operation
• Automation Grade: Automatic
• Size: 15" , 18", 30" , 36" , 42 Inch

• MODEL: Ci 375
• Working Capacity* – kg: 2-4
• Pan Diameter – mm: 375
• Pan mouth Diameter – mm: 170
• Pan Speed – RPM: 2-18
• Main Drive Motor HP: 1
• Inlet Fan Air Volume (CFM ± 10 %): 240
• Outlet Fan Air Volume (CFM ± 10 %): 300
• Electric Heater – kW: 9
• Compressed Air Pressure (bar): 6
• Electrical Supply**: 415 V 10%, 3 Ø, AC

Conventional coating machine are used to sugar coat tablets, pills, etc in for a variety of industries such as Pharmaceutical, Confectionery, Food and others. They are also used for rolling and heating beans and edible nuts or seeds. The product is to be filled inside the pan. During the rotation motion, coating material is sprayed by spraying system according to the technological process and rational technological process. So process materials (product) are coated due to rotating pan. The coating round pot is rotated by variable speed. At the same time hot air is supplied through inbuilt Hot air blower system which dries rapidly (heating or cooling) and evenly thus forming a solid and smooth surface.

• Machine Type: Bhagwati - ACM-30”
• Coating Pan Size: 30 “ DIA
• Volumetric Cap.: 45 ltrs
• Main Drive Motor: 1.5 KW/ 2 H.P. ,960 RPM ,3 Phase , 415 Volts, 50 Hz.

As one of the pioneering manufacturers of the Tablet Coating Machine, we, at Shree Bhagwati Machtech (India) Pvt. Ltd follow the top quality standards for designing our machines. The tablet coating machines manufactured by us have SS 304-complinat screen and parts. Moreover, the coating pan is highly durable and resistant to heat.Tablet Coating Pan is especially designed for film coating of oral solid dosage forms at controlled atmosphere in pharmaceutical industries ensuring user friendly operation. Benefits of our tablet coating equipment include effective mixing of final product bed, lowering emission of organic solvents, long term performance, automatic emptying and many more.

• MODEL: Ci 375
• Working Capacity* – kg: 2-4
• Pan Diameter – mm: 375
• Pan mouth Diameter – mm: 170
• Pan Speed – RPM: 2-18
• Main Drive Motor HP: 1
• Inlet Fan Air Volume (CFM ± 10 %): 240
• Outlet Fan Air Volume (CFM ± 10 %): 300
• Electric Heater – kW: 9
• Compressed Air Pressure (bar): 6
• Electrical Supply**: 415 V 10%, 3 Ø, AC

• Pan RPM: 2 to 45
• Electric Panel: Inbuilt type.
• Main Power Supply: 220 V, Single Phase.

SLC-LAB. TABELET COATING SYSTEM The hot air penetrates through the tablets core layers and is discharged from the bottom of the layers, so that the coating medium sprayed on the surface of the tablet cores will dry rapidly and evenly, thus forming a solid and smooth surface film on tablet.

• Working Capacity* – kg: 2-4
• Pan Diameter – mm: 375
• Pan mouth Diameter – mm: 170
• Pan Speed – RPM: 2-18
• Main Drive Motor HP: 1
• Inlet Fan Air Volume (CFM ± 10 %): 240
• Outlet Fan Air Volume (CFM ± 10 %): 300
• Electric Heater – kW: 9
• Compressed Air Pressure (bar): 6
• Electrical Supply**: 415 V 10%, 3 Ø, AC

With the inclusion of advanced technical knowledge in all our processes, we are engaged in presenting a broad assortment ofTablet Coating Machine. Under the guidance of our dexterous professionals, offered machine is made using superior grade components and cutting-edge technology at our well-maintained unit. Moreover, this machine is precisely checked by our quality controllers in compliance with predefined industry standards. Offered machine is available in various specifications and at reasonable prices.   Features: Robust design High performance Low maintenance

• Type: Tablet Coating Machines
• Weight: 100-500kg, 1000-2000kg, 2000-4000kg, 500-1000kg
• Color: Black, Brown, Grey
• Voltage: 110V, 220V, 380V, 440V, 480V, 580V
• Condition: New, Used
• Automatic Grade: Automatic, Fully Automatic, Manual, Semi Automatic
• Power: 1-3kw, 3-5kw, 5-7kw, 7-9kw, 9-12kw
• Driven Type: Electric, Hydraulic
• Warrenty: 1year, 2years

We manufacturer wide range of Tablet Coating Machine, Tablet Coating Equipment, Pharmaceutical Coating Machine , tablet coating pan for granules, tablet coating machine, tablet coating equipment, pharmaceutical Pellets/Tablets coating machine, tablet coating pan manufacturer, Candy tablet coating machine , tablet coating equipment, pharmaceutical coating machine manufacturer, Vitamins tablet coating pans, Food tablet coating machines Many different model we manufacturer Tablet Coating Pan for sugar and film coating of tablets, pallets and granules - Tablet Coating Machine, Tablet Coating Equipment, Pharmaceutical Coating Machine , tablet coating pan for granules, tablet coating machine, tablet coating equipment, pharmaceutical Pellets/Tablets coating machine, tablet coating pan manufacturer, Candy tablet coating machine , tablet coating equipment, pharmaceutical coating machine manufacturer, Vitamins tablet coating pans, Food tablet coating machines. Our range of tablet coating pans is extensively used for sugar and film coating of tablets, pallets and granules. The unit comprises of ellipsoidal shaped pan fabricated using stainless steel sheet and mounted on the gearbox shaft, which is driven by an electric motor. These tablet coating pan are available in standard and GMP model with SS 304 or 316 contact parts. FEATURES OF TABLET COATING PAN: The complete drive unit is enclosed in a sturdy cabinet Hot air blower with flexible SS Pipe heaters are provided with thermostat control for fast drying Heaters are interlocked with the blower motor therefore unless the blower is on, heater does not start

Salient Features   GMP Model available in24”/ 36”/ 42”/ 48”/ 60”/ 72” Dia. Coating pans for conventional coating of tablet. Fitted with Hot Air Blower and also available optional separate Hot Air Blower system. Easy to replace a Polishing Pan instead of Coating Pan. 36”, 42”, or 48” coating machine has variable speed drive and hot air blowing systems is built in the machine. 60” or 72” coating machine has variable speed drive and hot air separately on demand. Optional Spraying System can be provided for film coating with Peristaltic Pump, Spraying Nozzle with Stand and material handling container with stirrer. All Coating Machine are provided with interlocked electrical circuit so that heaters can be operated only after blowers are made “ON” to avoid burning of heaters.

• Filtration Area: 9 Sq. Ft. (0.8m²)
• Dust Storage Cap: ¾ Cu. Ft. (0.21M³)
• Intel Connections: 5 Nos. Of Dia 1½" (38.1mm)
• Electrical: Motor of 1 H.P, 2800 RPM, 440 V, 50 CS, 3 Ph

APPLICATION: 1.PAN: SS 316 semi ellipsoidal size pan with a circular mouth for charging & discharging of tablets Pan mounted at an inclination of 45 degrees to the horizontal. 2.DRIVE ASSEMBLY: Consists of a suitable HP 3 Phase, 440 V, and 1440-RPM TEFC motor with suitable worm reduction gearbox and cone pulley arrangement to give three-speed output. 3.HOT AIR BLOWER: The unit is provided with a hot air blower consisting of suitable HP 3 Phase 440 V, 2880-RPM TEFC electric motor & centrifugal blower with damper delivering required CFM. The air is heated by means of suitable electric heater to give air at 30 to 90 degrees Heater with thermostat control and flexible hose pipe 4.CONTROL PANEL: Unit provided with suitable control panel with starters and push button to actuate the drive and for blower The circuits consists of MCCBs, relays and contractors in series Ample overload protection is provided by the MCCB and the relay Wires coming out of the connections are numbered for easy recognition 5.MOUNTING: The motor and gearbox is mounted inside sturdy MS frame and the pan mounted on the Gearing housing fitted in the stand. Blower mounted by the side of the stand or placed in remote location if required 6.FINISH: All joints argon Arc welded and all SS Parts polished to suitable finished required of pharmaceutical equipment MS parts painted to smooth finish 7.DUST COLLECTION: 150 CFM (250M³/HOUR)at 70mm W.G

• Usage/Application: Tablet coating
• Automatic Grade: Automatic
• Weight: 350 Kgs
• Material: Stainless Steel
• Finishing Type: Pharmaceutcial
• Blower Motor: 1 Hp
• Heating Power: 1.5 Hp
• Frequency: 50 Hz
• Surface Finish: Mirror
• I Deal In: New Only
• Phase: 3

• Usage/Application: Tablet Coating
• Brand Name: PPM
• Country of Origin: Made in India
• Model Name/Number: PPM/AUTOCOATER/ANYSIZE
• Capacity: As Per Requirement
• Material: Stainless Steel
• Automation Grade: Automatic
• Finishing Type: Matte Or Mirror
• Phase: Three
• I Deal In: New Only

tablets coating machine, uniform coating machine

Tablet capsule coating machine, Pharmaceutical Machinery, Colloid Mill

tablet coating machines, Pharma Machinery, Hydraulic Power Packs

tablet coating machines, Vibro Sifter, Fluid Bed Processor, Colloid Mill

tablet coating system, Pneumatic Conveying System, Packing Conveyor