Tankaria Access Floors Navrangpura, Ahmedabad, Gujarat

The Access Floor System consists of 60cm or 24" hard cold rolled steel top sheet welded to a draw quality steel bottom pan at assembly of each dome and multiple joints along perimeter. The panels are internally filled with lightweight cementious product (ConCore). Its high strength cementitous fill gives the panel a quiet and solid feel. The floor panels are protected from corrosion by a Powder Coat Epoxy paint finish. The Tankaria panel systems are constructed of a welded structural steel assembly designed to accommodate dynamic loads. Panels ranging from lightweight to heavy duty industrial grade allow for use in any access-flooring.

Stringers are located on pedestals, creating a 600mm x 600mm grid, which enhances stability of the floor and improves the load performance. The panels are loose laid into the grid. The panels are supplied and installed in factory fitted floor coverings such as Anti-Static High Pressure Laminate (HPL) or Vinyl. Finish floor height from 75mm to 600mm.

Location of the panel is positively retained using Screw fixed directly to pedestals. Bare steel panels are supplied and installed in Powder Coated Epoxy Paint finish ready to accept an independent floor covering on site, Finished floor height from 75mm to 600mm.

Raised height pedestals available in height from 2.5" to 24".

Location of the panel is positively retained using Corner-Lock Screws fixed directly to pedestals. Bare steel panels are supplied and installed in Powder Coated Epoxy Paint finish ready to accept an independent floor covering on site, Finished floor height from 75mm to 600mm.