Test Kits Dealers in Ahmedabad

• Sample Type: Blood
• Number of Reactions(Preps) per Kit: 25 Test
• ICMR(Govt) Approved: Yes
• Test Method: (SARS-CoV-2) IgM/IgG Rapid-Antibody
• Material: Plastic
• Usage/Application: Hospitals/ Pathlab
• Type: Rapid Kit

• Color: Grey
• Feature: High Accuracy
• Testing Time: 0-10 Seconds
• Sample Type: Salt
• Testing Type: Salt Testing
• Kit Material: Plastic

The Bresle Test Kit supplies all the necessary equipment to test for chloride and soluble salt surface contaminants on blasted surfaces in compliance with ISO 8502-6 & ISO 8502-9.The test is highly important in view of Non visible salts present on the surfaces can lead to premature failures. Many coatings fail due to salts such as chlorides and sulphates contaminating the surface prior to the coating application.   This contamination can be tested quickly and simply using the Bresle Test Kit. This kit has advantage over portable units. Test can be quickly performed at site, shop floor and plants.   The Bresle Patch is attached to the surface; the distilled water is injected with a syringe then extracted, repeat ten cycles of injecting and extracting then measure with the Conductivity Meter. Compact conductivity meter will measure the quantity of salts in μg/cm2 (ppm) and mg/m2. Bresle test complies with ISO 8502-6, which relates to the extraction of soluble contaminants and ISO 8502-9, which relates to the conductometric determination of soluble salts. Calibration Certificates traceable are available for the Conductivity Meter in the kit.   The Bresle Test Kit is supplied with 50 Bresle Patches, 1 Conductivity Meter, Calibration Solutions, 5x5ml Syringes, 25ml Beaker and 250ml Distilled Water. Additional Bresle Patches can be purchased to carry out further tests using this kit.   Part Numbers: BTK-001 Bresle Test Kit BTK-002 Bresle Patches (Pack of 50 Nos.) BTK-003 Bottle 250ml - Distilled Water.

• Number of Reactions(Preps)/Kit: 1
• Brand Name: SD Biosensor
• ICMR Approved: Yes
• Test Method: Antigen Test
• Result Time (Rapid Kits): 15 Minutes
• Sample Type: Nasal Swab
• Packaging Size: 25 kit
• Country of Origin: Made in India
• Sensitivity: 84.97%
• Specificity: 98.94%
• Storage Temperature: 2 to 30 degreeC

• Color: White
• Application: Clinical, Hospital
• Feature: Active, High Accuracy, Skin Friendly
• Packaging Type: Paper Box
• Type: Malaria Test Kit
• Country of Origin: India

• Application: Clinical, Hospital
• Feature: Confortable, High Accuracy, Skin Friendly, Suitable For Self Testing
• Packaging Type: Plastic Bag
• Type: Hiv Test Kit
• Country of Origin: India
• Quality: Optimum Quality

• Application: Clinical, Home Purpose, Hospital
• Color: Cream, White
• Packaging Type: Catron, Paper Bag, Plastic Bag, Boxes
• Feature: Active, Confortable, High Accuracy, Skin Friendly, Suitable For Self Testing, Tiny Blood Sample Required
• Warranty: 1yrs, 6 Months
• Form: Card

• Test Method: Antigen Test
• Result Time (Rapid Kits): 15-20 minutes
• Packaging Size: 25 Test Kits / Box
• Sensitivity: 84.97%
• Stability: 2 year
• Dosage: As Prescribed by Physician
• Best Before: 18 Months from Manufacturing Date
• Caution: Keep away from Children

• Country of Origin: India
• Material: Plastic
• Usage/application: For Testing of Ph & Chlorine
• Packaging: Plastic Box
• Usage: Water Testing Industry
• Feature: Best Grade Material

Features Combines all electrical tests required by MCS and IEC 62446 Memory for up to 200 records USB download to PC Records irradiance wirelessly (separate SolarSurvey 200R required) Single key testing and measurement Safe test connection with energised PV arrays

We offer Test Laboratory Document Kit. Our consulting team has prepared documents conforming to the requirements of ISO 17025 laboratory management system for test laboratory and over 50 clients globally are already certified to ISO 17025: 2005 using our document kit.( Manual, Procedures, work instructions, SOPs, exhibits, audit questions , formats) The user can modify the templates as per their own laboratory need and create ISO:17025 documents for their own laboratory. This kit is useful for any types of testing laboratory.

• Type: Automatic
• Application: Laboratory
• Color: Blue, Gray
• Warranty: 1 Year
• Certificate: ISO Certified
• Brand Name: RASAYAn
• Power Supply: Not Applicable
• Voltage: 220 V

RASAYAN make sdi kit is useful for determination of silt density index of water. we are the leading manufacturer of sdi kit in ahmedabad, gujarat, india.RASAYAN Silt Density Index (SDI) kit is used to determine the fouling potential of water feeding a membrane filtration process such as a reverse osmosis (RO) system. This test is defined by its specific procedure (ASTM D- 4189). The ASTM procedure should be referenced for a more detailed description of the procedure. The nature of this test is such that it cannot be run in the laboratory. The SDI test should be run daily on the water entering the RO membranes after the cartridge filters. This frequency can be reduced to weekly once background data proves that less frequent sampling is sufficient. As such, a sample tap should be installed on the RO machine after the cartridge filters. This test can also be run across vessels such as filters or clarifiers to see if they are doing the job expected of them. SDI tests on the raw supply water should be part of every feasibility study for an RO system and it is good to run one periodically during operation of the system to make sure changes haven’t occurred. It is recommended practice to keep a record of SDI values and filters to observe changes over time.Completely assembled in a portable, compact case, ready for on-site testing. Includes ASTM instructions for measuring silt density index. Minimum of 30 PSI water pressure required. Optional Pump Assembly Kit available for pressures below 30 PSI.

• Test Principal: Transmittance/Absorbance Photometry
• Measuring Range: 2 to 25 g/dL
• Sample Type: Capillary blood venous blood (EDTA anti-coagulated)
• Sample Volume: 5 Micro Liter
• Precision: cv<3%
• Reading Time: Few Seconds
• Power: 3*AAA Alkaline Batteries
• Battery Life: 1000 tests will last for (1set of batteries)
• Size: 141mmx51.8mmx93mm
• Weight: Lightweight
• Temperature: 10oc-50oc
• Connectivity: Bluetooth smart BLE
• Calibration: Factory Calibration

Easy Procedure All Over India Supply More Chemical Quantity Highly Accuracy

• Motor rating output: 75 W

Competitively priced dispersing instrument for volumes from 0.5 – 100 ml (H2O) with special PCR kit. It offers a wide speed range from 8000 – 26,000 rpm that enables users to work at high circumferential speeds even with small rotor diameters. A broad choice of dispersing elements guarantees a wide range of applications. Quick-connect coupling for changing dispersing elements easily. Stainless steel dispersing elements can be cleaned quickly and easily as they can be dismounted without tools.

• Color: Blue
• Application: Hospital, Clinic
• Features: Resistant to Strikethrough, Fluid Control Features, High Quality Fabric
• Product Code: 06A10

Standard Penetration Test Kit Consists of Drive Weight, 65 kg, fitted with chain. Guide Pipe Assembly, fitted with a driving head on one side having standard "A" drill rod thread & a cap on the second side. Drive weight falls freely through a height of 75mm Tripod stand,6 meter high connected by a tie bolt. Each leg is made of three part for easy transport. Complete with pulleys and stairing arrangements. Tripod stand 5 meter long Each leg is made of two parts. Complete with pulley & stirring arrangement. Pulley Spare. "A" Drill Rod 1 meter long. "A" Drill Rod 1.5 meter long. "A" Drill Rod 3 meter long. Sampling Auger D – 1452 Augur are used to collect disturbed solid samples at reasonable depths for laboratory tests Augurs are available in two types and each in different sizes. Blade Type (Post Hole type) Each Augur outfit consists one each of augur head, one meter long rod, Tee piece and handle. Depths of excavating can be increased by using additional extension rods. Auger Head - 150mm diameter Auger Head - 100mm diameter Auger Head - 75mm diameter Auger Head - 50mm diameter Auger Head - 38mm diameter Extension Road 1 meter long for 150mm auger. 1 meter long for 100mm/75mm/50mm/38mm