Testing Apparatus Dealers in Kathwada, Ahmedabad

• Brand Name: EIE

We hold expertise in offering marshall stability test apparatus that is used for widely used for designing and evaluating bituminous paving mixes. The marshall stability test apparatus offered by us, can be availed at market leading prices. the apparatus consist of the following load frame marshal moulds (3 nos.) compaction pedestal compaction hammers (2 nos.) breaking head assembly optional accessories the following accessories and consumables are not part of the standard supply and are mandatory for the testing work proving ring of 30 kn capacity with calibration certificate with traceability flow meter dial gauge with 0.01mm graduation and 25mm travel water bath with thermostatic or digital control with stirrer electronic balance of capacity 5 kg/1gm or 2 kg/0.1 gm or two pan balance with set of weights and analytical weight box pair of asbestos gloves filter paper ( pack of 100 ) misc. Items: spatula, scoop, mixing tray, trowel, light mineral oil and benzene the following additional instruments will speed up the testing process with ease and accuracy.

Used to check and maintain the slope of the road as per design. Material- aluminum section of size 24 mm x 45 mm of thick gauge. Size- 3 meter, 3.5 meter, 3. 75 meter or as per requirement. Ratio- 2.0%, 2.5%, 3.0% or as per requirement. Accessories- highly sensitive magnetic spirit level and seat for it at centre.

• Temperature Range: 0-400 deg °C.
• Model No.: ESCR- A
• Time totaliser range: 999.9 hours
• Accessories: Cutting die, nicking jig, bending cum transfer tool, specimen holder, test tube & rubber cork
• Water circulation: Through induction motor with stirrer
• Testing capacity: 6 tests at a time
• Heating load: 1.5 to 3 KW
• Body: Inner S.S and Outer M.S with powder coating
• Power Supply: 230V AC, 50Hz
• Inner size of bath: 12"X 8"X 9"
• Dimension: 28"X 13" X 25"
• Net weight: 36 kgs

Mett-Bio Metallurgical Testing & Services with its state of the art equipment setup consisting of Salt Spray Chamber Complying to the Requirement of ASTM B 117/ ASTM G 85.   Tests are performed in our ISO 17025:2005 NABL accredited lab under the standard Specified conditions or as per specific field conditions.   Salt spray testing is a test method where in a product or coatings resistance to corrosion is evaluated in severe corrosive conditions with extended exposure to a saline or salted spray   This testing is carried out in a closed chamber which is filled neutral salt fog. The test specimen is exposed to a predetermined time period and inspected during its exposure. This test is carried out to check the integrity of coatings, paints in a corrosive environment. This test is carried out as per ASTM B117.   Types of Salt spray testing:   · Neutral Salt Spray (NSS), · Acetic acid Salt Spray (ASS), · Copper sulphate Acetic Salt Spray (CASS)   The salt spray test can be acclimatized to suite different corrosivity level to simulate different environments.   The test specimen is exposed to a predetermined time period and inspected during its exposure. This test is carried out to check the integrity of coatings, paints in a corrosive environment. This test is carried out as per ASTM G 85.   A standard 5% salt solution of sodium chloride known as NSS or neutral salt spray and a solution of acetic acid known as ASS. The solutions are chosen based on the type of coating to be evaluated   Other salt variations: SO2 / Calcium Chloride (CaCl2)

• Dial Gauge: 0.01mm x 25mm travel.
• One spacer: 100mm dia X 12.7mm thick
• One Gun metal mould: 100mm dia x 127.3 cm height X 1000 cc

ESCR Test Apparatus: Environmental stress cracking is a property that is highly dependent upon the nature and level of stress applied and on the thermal history of specimen. This taste is normally employed for routine inspection purpose.   

We are passionately engaged in offering an exclusive range of Salt Spray Test Chamber. These test chambers are inspected by a team of vendor’s quality experts against various quality parameters so as to dispatch a flawless range. We provide these test chambers in different specifications as per the variegated needs of our clients. Besides this, our given test chambers are highly acclaimed among our customers for its long lasting performance.

• Dimensions: Cm.
• Bottom diameter Top diameter Height: 20 10 30

Introduction The oldest, most widely used test for determining workability. This test is used to determine the workability of fresh concrete, which would normally be undertaken at the point of delivery to ensure the concrete, is of adequate consistency for placement. The test is applicable to concrete of medium workability.     The device is a hollow cone-shaped mould. The mold is filled in three layers of each volume. Each layer is rodded with a 16mm steel rod 25 times. The mould is then lifted away and the change in the height of the concrete is measured against the mould. The slump test is a measure of the resistance of concrete to flow under it own weight.   General Descriptions & Specifications The apparatus comprise of a slump cone with handles made of mild steel sheet, a chrome plated steel tamping rod of 16 mm diameter X 600 mm long, rounded off at one end, with a scale marked on it and a steel base plate with a carrying handle.     The mould for the test specimen will be in the form of frustum of a cone having the following internal dimensions as follows   The Cone is constructed of metal of at least 1.6 mm thickness and the top and bottom are open and at right angles to the axis of the cone. The mould have a smooth internal surface and provided with suitable foot pieces to a base plate and also handles to facilitate lifting it from the moulded concrete test specimen in a vertical direction as required by the test. The base plate is provided with cleats & swivel handle.   Optional Accessories CONCRETE SCOOP.FUNNEL FOR POURING CONCRETE IN CONE STRAIGHT EDGE

bitumen testing equipment, civil laboratory equipment, Cube Testing Machine

Bulk density, Carbon Black content tester