Testing Apparatus Dealers in Khokhra, Ahmedabad

• Brand: LALCO
• Condition: New
• Power Supply: 220-230 v
• No. Of Drums: Single & Double
• Model Number: 317

• Weight: 1.5 Oz (43 G)
• Accuracy: +/- 0.25% of full scale,±1°F (±0.5°C).
• Power: Electronic
• Temperature range: -55
• Analog Channel: 4
• Data: Analog & Digital
• Scan Time: 125 ms Internal Processor

The Triaxial shear test apparatus shall confirm with the requirements of IS: 2720 (Part 11) and (Part 12) and are made from corrosion resistant material.The Triaxial compression test, is used to simulate all combinations of practical stress and strain conditions, occupies at present a fairly dominant position in soil testing.   Features : Load Frame , Mototrized, 12 speeds, 50 Kn ( 5,000 kgf ):-(IS:2720(Part 11) and (Part 12)Load frame consist following features:Two pillar type, Detachable Frame, Enclosed Motor and Gear system, Jewel Lamps Indicating direction of motion, speed chart, operational ease, useful for both Triaxial and CBR Tests. The Load Frame consist of a cabinet which can house the gear system and motor with sturdy angle iron frame. The loading is done through the bottom loading platen, which is carried on a lead screw, which advances upwards. The top load bracket, which slides over two upright pillars, can be made positioned at any desired height and should be lockable. It should carry a screw adapter for standard proving rings. The loading part of the unit should be detachable from the main unit for ease of transport and to avoid damage to the tension rods. Load frame should having following strain rates: 12 speeds (between 0.0064 mm / min and 1.25 mm/min.)It should be suitable for operation on 220 V, 50 Hz, single phase, AC supply.

To determine the fineness of cements, pozzolanas and other powdery materials, various international specifications recommend the use of "specific area" method. In the methods described below, air permeability methods are used to determine the specific surface as total surface area in cm²/g of material. Air Permeability Apparatus Blaine Type IS: 5516 IS: 1727, IS: 4031, IS: 4825, ASTM C204, BS: 4359 Part 2, It is a variable flow type air permeability apparatus. The apparatus comprises one each of: Permeability Cell, 12.5 mm ID ‘U’ Tube Manometer, mounted on stand Perforated Metal Disc Plunger Rubber Stopper Rubber TUbe 20cm long. Rubber TUbe 20cm long Filter Paper Disc Dibutylphthalate Liquid

• Temperature: 25.0° C To 40.0° C
• Accuracy: ± 0.3° C
• Waterbath: 8 ltrs

Acrylic Tank is placed on the platform. A square shaped immersion Heater is also fitted to this acrylic water bath. Two 1000 cc capacity beakers supplied with the equipment are filled with water and placed on the stand in the water tank. The water in the waterbath is maintained at 37° C with an accuracy ± 0.3° C. Temperature setting is not required.The built-in RTD sensor maintains the bath temperature. Temperature and time indicators have both combined in one display unit thereby providing accurate digital indication of both parameters. The equipment can carry out two disintegration test of tablets simultaneously. It works on 230 volts single phase A.C. 50 Hz.

• Material: IRON
• Brand Name: KJ
• Automation Grade: Semi-Automatic
• Capacity: maximum capacity 20 kg/cm2
• Weight: Set of weights to give a pressure of 10 kg/cm2 on 60 mm

• Automation Grade: Semi-Automatic
• Brand: SHREEJI
• Material: MS
• Surface Treatment: Color Coated

Slump Cone, Rotary Type Electric Sand Screening Machine

Marshall Stability Test Apparatus, Automatic marshal compactor