Testing Apparatus Dealers in Rakhial, Ahmedabad

• Brand Name: KJ
• Triaxial Cells: 38mm and 50mm dia
• Size: 50 Kn ( 5,000 kgf )
• Digital Timer And Counter: YES

• Temperature: 25.0° C To 40.0° C
• Accuracy: ± 0.3° C
• Waterbath: 8 ltrs

Acrylic Tank is placed on the platform. A square shaped immersion Heater is also fitted to this acrylic water bath. Two 1000 cc capacity beakers supplied with the equipment are filled with water and placed on the stand in the water tank. The water in the waterbath is maintained at 37° C with an accuracy ± 0.3° C. Temperature setting is not required.The built-in RTD sensor maintains the bath temperature. Temperature and time indicators have both combined in one display unit thereby providing accurate digital indication of both parameters. The equipment can carry out two disintegration test of tablets simultaneously. It works on 230 volts single phase A.C. 50 Hz.

• Brand: LALCO
• Condition: New
• Power Supply: 220-230 v
• No. Of Drums: Single & Double
• Model Number: 317

Base has cleats on its underside to help dig into the ground surface Positive clamping of slump cone to the base while filling and rodding the concrete A combination swivel carrying handle also doubles as the datum making the conventional and somewhat awkward measuring procedure of using a foot rule and a datum bar, a thing of the past Supplied complete with base plate, having cleats and swivel handle This test is considered suitable for cohesive and plastic mixes of concrete containing aggregate smaller than 50 mm. The slump cone is filled with freshly mixed concrete and is tamped with a tamping bar in three or four layers. The top of the concrete is leveled off with the top of the slump cone, the cone is lifted vertically up and the slump of the sample is immediately measured.`

• Certification: CE Certified
• Weight: 10-20kg
• Voltage: 110V
• Capacity: 20L/Hr
• Power: 100-200W
• Driven Type: Electric
• Warranty: 1yrs
• Automation Grade: Automatic

Permeability apparatus is used for determining the permeability of cement mortar and concrete specimens of 15cm cubes cast in the laboratorySpecification: Three pressure gauges for indicating pressure in each cell are supplied apart from the main pressure gauge which indicates pressure in chamber. The concrete permeability apparatus comprises of a brass/ gunmetal cell of squares cross section mounted on a stand and a pressure chamber is connected to the cell through copper tubing and T-connector mounted on the stand with sleeve packed valve and rubber hose pipe with end connections. The cell assembly consists of one base plate, one metal funnel and one top plate, and a pressure tube is supplied to develop pressure in the chamber. The apparatus is supplied with a measuring cylinder 500cc to measure percolated quantity of water. Pressure can also be applied by a pressure air line or by a compressor. Available for sample of size 150mm dia X 150mm high. Available for sample of size 100mm dia X 100mm high. Accessories: Compresssor with pressure gauge 0-20 kg/cm sq. with automatic pressure valve and pressure rubber hose. Suitable for 440 volts A.C. three phase. Specimen casting mould C.I. for 100mm dia X 100 mm high cylinders, Specimen casting mould C.I. for 150mm dia X 10mm high cylinders, Specimen casting mould C.I. for 150mm cubes, Blow stove 1/2 litre capacity, Resin, Bees Wax, Wire brush, Chissel, Spare glass cylinder 500cc capacity  

Slump Cone, Tower Hoist, Rotary Type Electric Sand Screening Machine

Marshall Stability Test Apparatus, Automatic marshal compactor