Testing Apparatus Dealers in Singarva, Ahmedabad

We have a modern warehouse equipped to store a variety of products in bulk amount. Besides our wide distribution network, our warehouse enables us to maintain year round availability of products.We have a modern warehouse equipped to store a variety of products in bulk amount. Besides our wide distribution network, our warehouse enables us to maintain year round availability of products.We have a modern warehouse equipped to store a variety of products in bulk amount. Besides our wide distributi We are supported by hi-tech machines and expert personnel that enable us in meeting the bulk packaging of the products. Moreover, we check the entire lot before making the final dispatch.

• Temperature: Ambient to 50°C
• Accuracy: Better Than ±0.3°C
• Resolution: 0.1°C.
• Power: 230V AC
• Timer Range: 00:00:01(hrs:min:sec) to 99:59:59 (hrs:min:sec)
• Stroke / Min: Stroke Height 55mm, 30 Strokes / Min
• Water Bath: Approx.7 liters

Complies to all current USP, EP and other pharmacopoeia, Supports 2 test baskets & Quick release basket design, Compact, user-friendly operation, Connectivity with PC -Compatible keyboard for feeding product information, Selectable type of Disintegration: normal basket suppository basket, Incorporated the Code of Federal Regulations (21 CFR Part 11) feature of password protection (3 level ADMIN, SUPERVISOR and USER Password) Temperature : Ambient to 50°C Accuracy : Better than ±0.3°C

California Bearing Ratio Test Apparatus, Field Type (AIM 155)   This apparatus, mounted on a rolled steel joist cantilevered from the back of the truck or fitted to the underside of a mobile frame, can be used to determine the bearing ratio (generally known as the California Bearing ratio) of soils quickly and efficiently for the evaluation of strengths of sub-grade & bases for roads & runway pavements.This method of testing in-situ, using piston penetration, is useful for determining the load carrying capacity in the field, when the in-place density and water contents are such that the degree of saturation is 80% or greater, when the material is coarse grained and cohesionless so that it is not affected by changes in the water content when the material has been in-place.      

• Bottom diameter: 20 Cm.

the oldest, most widely used test for determining workability. This test is used to determine the workability of fresh concrete, which would normally be undertaken at the point of delivery to ensure the concrete, is of adequate consistency for placement. The test is applicable to concrete of medium workability.the device is a hollow cone-shaped mould. The mold is filled in three layers of each volume. Each layer is rodded with a 16mm steel rod 25 times. The mould is then lifted away and the change in the height of the concrete is measured against the mould. The slump test is a measure of the resistance of concrete to flow under it own weight. general description and specifications : the apparatus comprise of a slump cone with handles made of mild steel sheet, a chrome plated steel tamping rod of 16 mm diameter x 600 mm long, rounded off at one end, with a scale marked on it and a steel base plate with a carrying handle.the mould for the test specimen will be in the form of frustum of a cone having the following internal dimensions as follows. dimensions cm. bottom diameter 20 top diameter 10 height 30 the cone is constructed of metal of at least 1.6 mm thickness and the top and bottom are open and at right angles to the axis of the cone. The mould have a smooth internal surface and provided with suitable foot pieces to a base plate and also handles to facilitate lifting it from the moulded concrete test specimen in a vertical direction as required by the test. The base plate is provided with cleats & swivel handle. optional accessories : concrete scoop.funnel for pouring concrete in cone straight edge

• Type: Lump Test Apparatus
• Material: Mild Steel, Stainless Steel
• Certification: ISO 9001:2008
• Application: Lump Testing
• Color: Brown, Grey, Light White, Off White, Silver, White
• Condition: New
• Phase: Single Phase
• Warranty: 1yrs

We are the main supplier of this product.

Disintegration tester, tapped density tester, friability tester, digi blocks