Testing Apparatus Dealers in Ahmedabad

Mett-Bio Metallurgical Testing & Services with its state of the art equipment setup consisting of Salt Spray Chamber Complying to the Requirement of ASTM B 117/ ASTM G 85.   Tests are performed in our ISO 17025:2005 NABL accredited lab under the standard Specified conditions or as per specific field conditions.   Salt spray testing is a test method where in a product or coatings resistance to corrosion is evaluated in severe corrosive conditions with extended exposure to a saline or salted spray   This testing is carried out in a closed chamber which is filled neutral salt fog. The test specimen is exposed to a predetermined time period and inspected during its exposure. This test is carried out to check the integrity of coatings, paints in a corrosive environment. This test is carried out as per ASTM B117.   Types of Salt spray testing:   · Neutral Salt Spray (NSS), · Acetic acid Salt Spray (ASS), · Copper sulphate Acetic Salt Spray (CASS)   The salt spray test can be acclimatized to suite different corrosivity level to simulate different environments.   The test specimen is exposed to a predetermined time period and inspected during its exposure. This test is carried out to check the integrity of coatings, paints in a corrosive environment. This test is carried out as per ASTM G 85.   A standard 5% salt solution of sodium chloride known as NSS or neutral salt spray and a solution of acetic acid known as ASS. The solutions are chosen based on the type of coating to be evaluated   Other salt variations: SO2 / Calcium Chloride (CaCl2)

• Voltage: 220/230 V
• Integral type Proving Ring capacity: 3000 kgs.
• Capacity: 50 KN
• Constant: 50.8 mm/minute
• Gauge: 0.01 x 25 mm

• Temperature: 25.0° C To 40.0° C
• Accuracy: ± 0.3° C
• Waterbath: 8 ltrs

Acrylic Tank is placed on the platform. A square shaped immersion Heater is also fitted to this acrylic water bath. Two 1000 cc capacity beakers supplied with the equipment are filled with water and placed on the stand in the water tank. The water in the waterbath is maintained at 37° C with an accuracy ± 0.3° C. Temperature setting is not required.The built-in RTD sensor maintains the bath temperature. Temperature and time indicators have both combined in one display unit thereby providing accurate digital indication of both parameters. The equipment can carry out two disintegration test of tablets simultaneously. It works on 230 volts single phase A.C. 50 Hz.

We offer friability test apparatus. used to determine the durability and abrasiveness ol tablets a transparent perspex drum made of imported perspex sheet 6. 4 mm thick 300 mm dia x 35 mm deep and white cover disc and nut. Also a shaped radical fixed blade which carries the tablets along with it up to the central height and lets them off while the drum is rotating. Thus the tablets rub against each other wrthout any hard impact the drum rotates at a fixed speed of 30 rpm by a geared motor and the rotation period is controlled by a timer. The motor unit is housed in a shaped steel cabinet with shaft extended on one side upon which the drum rotates switches with neon indicators and lime switch are fitted on a panel and provided work on 220volts 50 hz ac.

The Density Test Apparatus, provided by us, is acclaimed due to its quality & make. We are most sought after Supplier, affianced in providing user and pocket friendly Density Test Apparatus. We make use of the finest grade raw material that reflects in the finished products. Also, we make sure that it is procured from the trusted places only.

• Temperature: Ambient to 50°C
• Accuracy: Better Than ±0.3°C
• Resolution: 0.1°C.
• Power: 230V AC
• Timer Range: 00:00:01(hrs:min:sec) to 99:59:59 (hrs:min:sec)
• Stroke / Min: Stroke Height 55mm, 30 Strokes / Min
• Water Bath: Approx.7 liters

Complies to all current USP, EP and other pharmacopoeia, Supports 2 test baskets & Quick release basket design, Compact, user-friendly operation, Connectivity with PC -Compatible keyboard for feeding product information, Selectable type of Disintegration: normal basket suppository basket, Incorporated the Code of Federal Regulations (21 CFR Part 11) feature of password protection (3 level ADMIN, SUPERVISOR and USER Password) Temperature : Ambient to 50°C Accuracy : Better than ±0.3°C

This apparatus is used to determine Softening point of Bitumen. It is that temperature at which a sample of bituminous material loaded by a 9.5mm dia steel ball, drops a specified distance when heated under specified conditions.

• Brand Name: KJ
• Triaxial Cells: 38mm and 50mm dia
• Size: 50 Kn ( 5,000 kgf )
• Digital Timer And Counter: YES

We have a modern warehouse equipped to store a variety of products in bulk amount. Besides our wide distribution network, our warehouse enables us to maintain year round availability of products.We have a modern warehouse equipped to store a variety of products in bulk amount. Besides our wide distribution network, our warehouse enables us to maintain year round availability of products.We have a modern warehouse equipped to store a variety of products in bulk amount. Besides our wide distributi We are supported by hi-tech machines and expert personnel that enable us in meeting the bulk packaging of the products. Moreover, we check the entire lot before making the final dispatch.

• Material: Mild Steel
• Voltage: 220 V
• Usage: Laboratory
• Display Type: Digital
• Frequency: 50 Hz
• Power Source: Electric

• Size: 18”x12”x10
• MOC: Inner Bath S.S. Outer Bath: Powder Coated M.S. with Top SS Lid.
• Heating Load: 2 KW.

Environmental Stress Crack Resistance (ESCR) is a very crucial property required in plastics for its durability. ESC is one of the most common causes of unforeseen brittle failures in thermoplastics which may account for around 15-30% of all plastic component failures in service.

Our company offers a wide gamut Filter Testing Apparatus that primarily include gaskets, O rings, ball valves, pressure switches, tie rods, hooter, etc. Fuel Filter Testing Apparatus manufactured by our company can be availed in various specifications depending on the requirement and application area. We also offer varied range of cleaning devices, testing machines, R&D filter units, ultrasonic cleaning system, bubble point test system, etc. Because of the availability of various types testing apparatuses, we are known as one of the reputed Air Filter Testing Apparatus Manufacturers.Our range of filter testing apparatus includes the following O ring: Viton, PTFE, siliconTriclover clamp, rothmans clamp, eye boltGaskets: Viton, teflon, CAF, rubber gasketsDavit armVent valve with pressure gaugePressure switchHooterBall valveThree way valveTie rods: Triangular, square, cylindrical

Leak Test Apparatus is a solid state instrument designed for the leakage testing of food, drug and other industrial chemical products. The instrument is used to test the quality of packing processes in strips, blisters and sachets containing tablets, granulates and liquids. They are also used to check that the seals enclosing the product are perfectly intact.The unit contains a polycarbonate desiccator housing to sustain the vacuum for long time. A compact vacuum pump for creating high vacuum level in short time period is used. A vacuum gauge on the front panel of the instrument indicates the vacuum level. The vacuum gauge is connected to a control valve that isolates the vacuum inside desiccator from the vacuum source.

• Brand: LALCO
• Condition: New
• Power Supply: 220-230 v
• No. Of Drums: Single & Double
• Model Number: 317

• Temperature range:: 10 ° C to 200 ° C
• Thermal resistance range:: 0.1
• Co-efficient of thermal condu :: 0.1 – 2 w/mK
• Repeatability:: 0.50%
• Accuracy:: ± 1 – 3 %
• Plate temperature control:: Through mini-chiller system
• Refrigerant:: Refrigerant R134a – CFC Free
• Refrigeration Make:: Emerson/Kirloskar/Danfoss make (Reputed brand)
• Hot plate dimensions:: 310 mm x 310 mm
• Hot plate thickness :: 4 mm
• Hot plate material :: Copper
• Central Heater capacity:: 500 watts, sandwiched between two copper plates
• Central Heater dimensions:: 150 mm x 150 mm
• Central Heater plate material:: Brass material
• Ring Guard Heater capacity:: 1500 watts between two copper plates
• Ring Guard Heater dimensions :: 306 mm x 306 mm
• Cold plate dimensions:: 310 x 310 mm
• Cold plate thickness:: 1.2 mm
• Cold plate material :: Copper
• Test specimen size :: 30 x 30 x 10 cm3
• Operation on:: 230 Volts, 50 Hz, AC Supply

Swell Test Apparatus (AIM 132)   It is designed to determine the swelling pressure developed by soil specimens moulded to desired densities at known moisture contents, when soaked in water. The load applied to restrain the swelling is transferred on to a load measuring proving ring through a perforated swell plate and a load transfer bar. The proving ring is attached to the lead screw of hand operated load frame. A soaking tank is provided for saturating the specimen and the base of the mould provided has channels and radial grooves with connecting holes.     Application Measurement of Swell pressure. Industry Chemical/Process Agricultural Civil Infrastructure Dams & Tunnels Geophysical/ Seismology Testing Geotechnical (soil/ rock) Testing Irrigation Mining Real Estate Roads, Highways & Bridges Education Architecture Building Technology Civil Department Geotechnical Mining Engineering Science Colleges Traffic & Transportation Railways Roads, Highways & Bridges

• Brand Name: JDJ
• Material: MS
• Voltage: 230V
• Phase: Single Phase
• Temperature: 37 deg C
• Usage/Application: Laboratory
• Display Type: Digital LED display
• Hot Plate Control Type: Digital PID Controller
• Surface Finish: Powder Coated
• Model: Double Basket
• Motor Speed: 30 RPM
• Alarm Facility: Yes

The equipment is used for the determination of the relative density of cohesion less free draining soils and meets the essential requirements. Specification : The equipment consists one each of: Vibratory table, with a cushioned steel vibrating decks about 75cm x 75cm. It has a frequency of approximately 3600 vibratory table, minute under a 11.5kg load. Amplitude is variable in between 0.65mm in step of 0.05 to 0.25mm, 0.25 to 0.45 mm and 0.45 to 0.65mm. Suitable for operations on 415V, Three Phase supply. Cylindrical metal unit weight mould, 3000ml. Capacity.Guide sleeve with clamp assembly. Surcharges base plate for mould. Handle for surcharge base plate. Surcharge weight. The total weight together with surcharge base plate and handle is equipment to 140 kg. /sq. cm. For mould. Cylindrical metal unit weight mould 15000 ml. capacity. (Total weight together with the above mould & surcharge weight is equivalent to 140 kg./sq. cm) dial gauge 0.01mm x 50mm travel. Extension piece 25mm for dial gauge.

• Temperature: Ambient to 50°C
• Accuracy: Better than ±0.3°C

Complies to all current USP, EP and other pharmacopoeia, Supports 2 test baskets & Quick release basket design, Compact, user-friendly operation, Connectivity with PC -Compatible keyboard for feeding product information, Selectable type of Disintegration: normal basket suppository basket, Incorporated the Code of Federal Regulations (21 CFR Part 11) feature of password protection (3 level ADMIN, SUPERVISOR and USER Password)

The ERWEKA ZT 720 series automatically determines the disintegration time of each sample by use of a unique system of magnets and sensors. It also tests whether or not a sample completely disintegrates.

We are offering hdt test apparatus. Temperature range- ambient to 120°c temperature least count- 0.1°c temperature accuracy- ± 0.5°c temperature ramp- 50°chr & 120°chr cooling- manually specimen thickness- 3 – 13 mm span length- 100mm (others optional) fiber stress- 0.45mpa, 1.8mpa, 8 mpa (others optional) displacement sensing- analog dial gauge displacement range- 0.00 – 10.00

As per IS 1210 without thermometer.

FEATURES Digital timer with 1 second resolution Accurate time out provided by microprocessor based time totalizer Baskets move Up & Down as per IPUSP test specifications Temperature Controlled by sensitive thermostatsDigital Tablet Disintegration Apparatus Model-901 is designed for accurate estimation of disintegration time of tablets as per IPUSP standards. The instrument is designed to test tow batches of six tablets, simultaneously. The unit consists of two beakers having capacity of 1000 cc each. In these beakers, suitable disintegration media can be taken. These can be temperature controlled using a in-built heater and a highly thermostat fitted inside the instrument. Microprocessor based time totalizer is provided for accurate time readout.

• Dimensions: Cm.
• Bottom diameter Top diameter Height: 20 10 30

Introduction The oldest, most widely used test for determining workability. This test is used to determine the workability of fresh concrete, which would normally be undertaken at the point of delivery to ensure the concrete, is of adequate consistency for placement. The test is applicable to concrete of medium workability.     The device is a hollow cone-shaped mould. The mold is filled in three layers of each volume. Each layer is rodded with a 16mm steel rod 25 times. The mould is then lifted away and the change in the height of the concrete is measured against the mould. The slump test is a measure of the resistance of concrete to flow under it own weight.   General Descriptions & Specifications The apparatus comprise of a slump cone with handles made of mild steel sheet, a chrome plated steel tamping rod of 16 mm diameter X 600 mm long, rounded off at one end, with a scale marked on it and a steel base plate with a carrying handle.     The mould for the test specimen will be in the form of frustum of a cone having the following internal dimensions as follows   The Cone is constructed of metal of at least 1.6 mm thickness and the top and bottom are open and at right angles to the axis of the cone. The mould have a smooth internal surface and provided with suitable foot pieces to a base plate and also handles to facilitate lifting it from the moulded concrete test specimen in a vertical direction as required by the test. The base plate is provided with cleats & swivel handle.   Optional Accessories CONCRETE SCOOP.FUNNEL FOR POURING CONCRETE IN CONE STRAIGHT EDGE

ESCR Test Apparatus: Environmental stress cracking is a property that is highly dependent upon the nature and level of stress applied and on the thermal history of specimen. This taste is normally employed for routine inspection purpose.   

• Type: Lump Test Apparatus
• Material: Mild Steel, Stainless Steel
• Certification: ISO 9001:2008
• Application: Lump Testing
• Color: Brown, Grey, Light White, Off White, Silver, White
• Condition: New
• Phase: Single Phase
• Warranty: 1yrs

We are the main supplier of this product.