Testing Equipment Dealers in Parimal Garden, Ahmedabad

• Frequency: 5/50/500/5k/50k/200kHz +-0.1%rdg +-5dgt (Measurable input 1.5Vrms or more)
• Power Source: Button type battery LR44 (SR44)1.5V x 2
• Weight: Approx. 100g (including batteries
• Warranty: 1 Year
• Measurement functions: The measured value can be hold by pressing Data hold button
• Dimensions: 190(L) x 39(W) x 31(D)mm
• Included Accessories: Carrying case, LR44 (1.5V) x 2, Instruction manual
• Item Code: 1030
• Model Name/Number: 1030
• Brand: Kyoritsu
• Digit Display: 4 Digit
• DC Voltage: 600V
• AC Voltage: 600V
• Data Hold: Yes
• Auto Power Off: Yes
• Low Battery Indication: Yes

Systech Water Vapour Transmission Rate Tester - WVTR Tester, Model 7101 unit conforms to following standards: New ASTM F3299, ASTM F1249, ISO 15106-3, ISO 15105-2, DIN 53122-2, etc. Modular systems for precision water vapor permeability testing of packaging film barriers.  Systech Model 7100 water vapor analyzer range utilizes the new technology, accurate and stable P2O5 sensor for absolute moisture measurement. These water vapor analyzers offer a wide measurement range of 0.002-1000 g/m²/day and precision temperature, humidity and flow control, providing accurate and repeatable results for research and development testing of water transmission rate - WVTR in both current and newly formulated packaging film materials and precise, accurate, repeatable and fast testing. All Systech Illinois analyzers are certified traceable to NIST. In addition, analytical performance is validated using NIST certified gases and NIST traceable films. A set of calibration films and a spare P2O5 sensor come as standard with all of our water vapor permeation analyzers.

We are offering Complete range of bitumen testing instruments as per following Marshall stability test apparatus Automatic marshall compactor Rolling thin film oven Rotational viscometer Skid resistance tester Ductility testing machine (Without refrigeration) Ductility testing machine with Refrigeration System Fully automatic penetrometer Low temperature waterbath Core drilling machine Mastic Asphalt Hardness Tester Flameproof bitumen extractor Planetary Mixer Petroleum distillation apparatus Distilllation apparatus as Muffle furnace Hot air oven - CE Marked Loss on heating test oven Softening point apparatus Saybolt viscometer Cleaveland flash and fire point apparatus Pensky marten flash point apparatus Benkleman Beam apparatus Density of semi solid bituminous material Marshall Rammer Ductility moulds Camber board Pycnometer bottle Aspirator pumps

Disintegration Testers Friability testers Granulate Flow Testers Tablet Hardness Testers Packaging density tester Tapped density tester Suppository Testers

Air Permeability Apparatus, Blaine Type (AIM 390) Ref Std : IS 5516   This apparatus is supplied with ISI mark. It is variable flow type Air Permeability Apparatus.   Application 1/2 inch and 1/4 inch microphone preamplifier Industry Civil Infrastructure Cement/RMC Construction Chemicals Dams & Tunnels Fly Ash Railways Sleepers Real Estate Refractories Roads, Highways & Bridges Tiles Education Architecture Building Technology Civil Department Geotechnical Science Colleges Metal & Material Tiles & Ceramics Special Applications Fly Ash Traffic & Transportation Railways Roads, Highways & Bridges

FEATURES   => State of Art Microcontroller Based Design.=> Built in Solid state selector switch for phase selection=> Super bright LED display for crystal clear long distance day light viewing=> All CT ratios user Programmable through front Key Pad=> Built in Transducer=> True RMS measurement

Manufacturers & Exporters of PET Bottle and Jar Top Load Tester Top Load Test is a test carried out to measure the maximum load at which the buckling of PET bottles, Plastic Containers, Buckets etc. happens. Top Load Test is a measurement of ability of material to withstand forces that tend to pressure applied and to determine to what extent the material withstands pressure before buckling occurs. Specification : Load Capacity : 500 Kg.(Resolution 0.1 Kg) Compression Through : 2 Nos. 400mm x 200mm x 12mm thick plates Maximum distance between Two Plates : 350 mm or as per your requirements. Speed : Variable with AC frequency drive with geared motor. Height : Adjustable As Per Sample. Paint : Powder Coating. Power : 230V Ac, 1 Phase, 50 HZ. Microprocessor based load indicator: Accuracy of ±0.05% of load indicated Newton or Kg. can be selected. Load cell I/P – one

• Rated Power: 5 Vdc adaptor (Included
• Model Name/Number: HI2002-02
• Type Of Ph Meter: Table-Top
• Brand: Hanna
• Usage/Application: Laboratory
• Weight: 250g
• Calibration: Automatic Upto 3 point / 5 point
• Resolution: 0.01ph; 0.001pH
• Ph Range: -2.00-16.00 pH; -2.000 to 16.00 pH
• Is It Water Proof: Water Proof
• Color: White
• Accuracy: + 0.001 ph; +0.002 pH
• Ph Electrode: included
• Temperature Accuracy: +0.05; +0.9
• I Deal In: New Only

We are the most eminent manufacturer and supplier of textile testing equipments in India. These equipment ranges include cotton fabric dyeing machine, HTHP yarn dyeing machine and lab dyeing machine etc. These have great demand in the textile industries and laboratories as they offer accurate results in a very reliable manner.

The fineness of cement has a significant effect in its physical properties when used in concrete. Generally the finer the cement powder, the more rapid the concrete will set, as there is an increase in its surface area. The measure of fineness is usually undertaken by sieving, and the result assessed against the cement standard for compliance.The Blaine air permeability apparatus is used to determine the fineness of Portland cement in terms of the specific surface expressed as total surface area in square centimeters per gram of cement. The Blaine apparatus draws a defined volume of air through a prepared bed of cement of defined porosity. General Descripation & Specifications The apparatus comprises one each of Brass or stainless steel permeability cell 12.5mm,'U' tube manometer with stop cock mounted on a laminated wooden stand, perforated metal disc, plunger, Rubber stopper, Rubber tube - 30cm long with rubber bulb. Optional Accesorries At extra cost Balance with 0.001 gm resolution Stop Watch with 0.5 second resolution Manometer Liquid Whatman Filter Paper Filter Punch

Air content of fresh concrete is normally measured, by the use of a special air meter, to assess whether the concrete contains the required amount of air. This would be measured when air’s entrapment or entrainment is required by the concrete design. The method uses the principle of replacing the air in a known volume of concrete with water, the volume of which can then be measured. General Descripation & Specifications The apparatus consists of a pressure tight flanged cylindrical measuring bowl of specified volume in accordance with size of aggregate to be tested. The bowl is fitted with a removable flanged conical cover assembly with the help of a airtight sealing gasket. The conical cover has an air valve and a pet cock for bleeding off the water. A transparent cylindrical stand pipe, which is graduated in air content, is fixed to the conical cover assembly.Pressure is applied to the specimen with the help of pressure bulb and the pressure is recorded on the pressure gauge which is mounted on the stand pipe. The whole assembly is mounted on a flat base. Standard Accessories : Calibration cylinder with spring clamp,Trowel,Tamping rod,Straight edge,Rubber mallet andmeasure. – 1 No. each

This Instrument is in according to ASTM D 1709 BS, DIN, ISO, IS: 2508 (Indian Standard) or according to customer’s required specification A two piece annular specimen clamp having an inside diameter of 127mm The movable part of clamp is maintaining positive contact with the lower part of the contact to hold the film sample firmly Pneumatically operated clamps have been used to hold film successfully in to the clamps Electromagnet withstand 2 Kg. weight. Electromagnet unit is to be equipped with a centering device to ensure reproducible drop. Electric power is used to energize and de-energize the electromagnet Positioning device is provided to positioning the dart at a different drop height Position device is built in two parts. One is for 22cms and 66cms and another is suitable up to 152.4cm Darts and weights : As per standard Test Methods A and B darts with hemispherical heads

• Material: Stainless Steel
• Country of Origin: Made in India
• Feature: Easy to use, Portable, Unmatched quality

• Temperature: Ambient to 50°C
• Accuracy: Better than ±0.3°C

Complies to all current USP, EP and other pharmacopoeia, Supports 2 test baskets & Quick release basket design, Compact, user-friendly operation, Connectivity with PC -Compatible keyboard for feeding product information, Selectable type of Disintegration: normal basket suppository basket, Incorporated the Code of Federal Regulations (21 CFR Part 11) feature of password protection (3 level ADMIN, SUPERVISOR and USER Password)

• Type: Disintegration Tester
• Displacement: 55mm
• Power: AC/230 volt Single Phase
• Drive: 1/8 HP
• Heater: 125 watt.

NTPL is devoted towards providing superior quality products that are customized according to the specific requirements of clients. With the introduction of ISO system, occurrences of defects in production are prevented and as a result TQM standards are followed. This also enables quality improvement at controlled costs of production that in turn facilitates competitive pricing. Quality of our products and production process is our primary concern, which has been the driving force behind our rapid growth. We conduct numerous quality checking procedures and audits right from material acquisition to packing. It is our endeavour to create a culture of Total Quality where continuous improvement of our people, our processes and our products become a way of life. With our "Vardhman-BROCKHAUS Magnetic Material Testing Laboratory" we assure quality with commitment. Navkar Transcore has already applied for NABL Approval which will be one of its kinds in Transformer Lamination Industry. Click to zoom... Navkar Transcore Magnetic Material Testing Laboratory Single Sheet Tester Ring Core Tester Epstein Tester Franklin Insulation Resistance Testing Machine Various measures are being taken to ensure the quality of incoming and outgoing materials till up to finished lamination or core and their packaging. It is also assured that all the measuring instruments used for quality checks are approved by the Govt. recognized Agency to ensure accuracy and exactness. In addition to our quality material supply, the Cut to length line installed at our plant also provides the added benefits of precise core cutting, core losses as well as reduction of noise level up to 15%

• Temperature display: LED
• Temperature range: 5 degreeC above ambient to 200 degreeC
• RPM Indication: Digital indication on RPM indicator
• Operates: 230 Volt, 50 Hz, Single Phase, AC Supply
• RPM Control: Controlled by accurate DC Drive
• Features: Aesthetic outer appearance,Unique and self explanatory design,Designed by keeping in mind easy cleaning and maintenance purpose,Efficient heating system saves power by reducing the overall power consumption,Inbuilt memory for data recording saves on addit

We are offering treadmill test equipment. the features of tread mill test are as under: • advanced exercise testing system. • cardio - st exercise testing system offers simplicity, accuracy, versatility and reliability to suit your needs for performing stress test. • cardio - st is the combination of accurate, reliable, and field proven electro – cardiograph module developed by concept integrations and very low noise performance heavy duty treadmill. • automatic report generation. • display color coded comparison with reference lead with st level & st slope value. • complete test along with patient details can be stored. • provided a facility to store only results of the complete test. • stored test can be recalled and reviewed. • fine control of speed of treadmill by using ac drive. Low noise, jerk free change in elevation & speed, rs 232 communication, sleek new body style, built for comfort, heavy duty steel section, cushioned deck, thick walking belt.