Testing Machines Dealers in Ambawadi, Ahmedabad

• Brand Name: Hopkinson’s

We offer the customers hopkinson’s test dc machine. The hopkinson’s test dc machine designed to demonstrate the fundamental concepts and also facilitates easy learning about the various losses of dc machine. One can also determine the efficiency of dc machine by separately calculating the losses. technical specifications 200 v fixed dc : 0 - 200 variable dctype : dc shuntvoltage rating : 200 vrpm : 1500 (no load)insulation : class 'b',’f’voltmeter : 300 vammeter (2 nos.).

• Maximum pressure range: up to 60kg/cm²

Maintenance and leakage free pressure gauge valve fitted inside machine. All stations with auto-locking quick release outlets, Digital programmable time totalize for time counting in short term and long term stations with buzzer indication for completion of the test and busting during the testing.

• Brand Name: EIE

We are offering Compliance with following Intaernational Standards IS : 14858 - 2000 Introduction The digital compression testing machine has been designed to meet the need for a simple, economic and reliable means to test concrete for its compressive strength. The design expressive of simplicity, both of construction and operation, makes the machine easy to use and maintain. The digital machines are provided with a MANUAL pace rate controller, to enable maintain a constant rate of loading. The Complete unit comprises a Loading Unit which is of four pillar model construction, having a cross-head with a spherical seated platen. The lower platen is attached to the top of the piston. The Loading capacity is of 1500 KN, Cubes up to 200 mm & Cylinders up to 150 mm Diameter x 300 mm Height can be tested using the appropriate spacers. The pump facilitates rapid approach of the platens for daylight closure and also provides comprehensive control over the application of load. A control valve provides fine control over the loading rate for accurate pacing. Maximum load is held and retained for approximately 15 minutes, unless cancelled, using the panel mounted reset switch. Salient Features of EIE - Digital CTM Machine · 4 line Alphanumeric display with backlit, displaying - Actual Load, Peak load, Rate of loading and Calculated load in Nmm² · Direct reading of compressive strength in Nmm2 - No calculation required · Peak hold facility · Can manually control pace rate from 1 KNSec to 9 KNsec

Combining our experience in the industry with technology we possess, we take the job to deliver maximum quality to the customers. We offer a range of 300KN Testometric Universal Testing Machine. Our team of quality controllers keeps quality on the top of our priority list. It is optimally designed, robustly constructed and smoothly operable. Lay your hands on such quality for economical rates.Description : The FS300 computer controlled universal materials testing machine using Testometric’s feature-rich winTest™ Analysis software running under the Windows™ operating system. Test setups are fully configurable and simple or more complex multi-stage test routines are controlled using the standard PC serial interface.   Features : Integral PC system running winTest™ Analysis universal testing software. Touch screen display with active tester control panel and readout screen showing real time test curves calculated results and statistics. Industry standard and / or customer specific test methods pre-installed. (Supplied separately with a CT model) Multi-lingual on screen keyboard. Self diagnostics software with on screen notification icons. Connection for remote monitoring of machines, with on-line service. Grade 0.5 load cells to all international standards including EN10002-2, EN7500-1, DIN51221, ASTME4, AFNOR A03-501, JISB7721. Grade 0.5 from 0.4% to 100%. Digital display of force, displacement, cell capacity, speed, position, mode, units etc. Real time graphic display with multiple axis selection, autoscaling etc. Manual control of crosshead with all functions. (Via touch screen on AT and PC on CT model) Configurable for cyclic and complex multi stage test procedures. Fully digital testing system with high precision control and accuracy, includes automated computer control of test methods. High resolution auto ranging load cells with accuracies better than +/-0.5% down to 1/1000th of the load cell capacity. Automatic recognition and calibration of load cells and extensometers, with instant calibration check facility. 800% overload capability of load cells without damage. Overload, overtravel and impact protection. Crosshead guidance system providing precise alignment and smooth running. Precision crosshead control via digital AC servo drive and brushless servo motor giving maintenance free operation and 4,000,000 steps per revolution positional control. High speed data collection systems for up to 4 synchronous channels. 6 I/O channels for additional devices such as extensometers, micrometers, callipers, balances etc. High stiffness loading frames with solid specialised steel crossheads and rigid extruded support columns with T-slots for accessory mounting. Software : Comprehensive winTest™ Analysis universal windows software covering tensile, compression, peel, shear, tear, cyclic, creep and multi stage testing. It includes a wide range of industry standard test methods and facility to create and store an unlimited number of further test methods. There is automated storage of all test data and ease of export to other software packages such as word, excel, access and SPC systems for enhanced report generation.

The aggregate impact value of coarse aggregate provides a relative measure of the resistance of an aggregate to sudden shock or impact. The oven dried and accurately weighed aggregates are subjected to a total of 15 blows of specified weight and fall and percentage of fines formed in terms of the total weight of the sample is expressed as the aggregate impact value. General Description & Specification : Consists of base weighing between 20-30 kg with a lower surface of not less than 30cm and support columns to form a rigid frame work around the quick release trigger mechanism to ensure an effective free fall of the hammer during test. The free fall can be adjusted through 380 + 5.0mm. The hammer is provided with a locking arrangement. A metal tup (hammer) weighing 13.5 to 14.0 kg, the lower end of in cylinderical shape, 100mm in diameter and 5cm long with a 2mm chamfer at the lower edge and case hardened. Complete with a cylindrical cup, 102mm dia x 50mm depth, one measure 75mm dia x 50mm deep and a tamping rod of circular cross section 10mm in diameter and 230mm long, rounded at one end. Optional Accessories : The following accessories are not part of the standard supply and are supplied at an extra cost. Test Sieve 10mm, 12.5mm and 2.36mm opening. Laboratory Oven. Automatic Blow Counter. Electronic Balance 500gm x 100 mg / Two Pan Balance.

The aggregate impact value of coarse aggregate provides a relative measure of the resistance of an aggregate to sudden shock or impact. The oven dried and accurately weighed aggregates are subjected to a total of 15 blows of specified weight and fall and percentage of fines formed in terms of the total weight of the sample is expressed as the aggregate impact value. Consists of base weighing between 20-30 kg with a lower surface of not less than 30cm and support columns to form a rigid frame work around the quick release trigger mechanism to ensure an effective free fall of the hammer during test. The free fall can be adjusted through 380 + 5.0mm. The hammer is provided with a locking arrangement. A metal tup (hammer) weighing 13.5 to 14.0 kg, the lower end of in cylinderical shape, 100mm in diameter and 5cm long with a 2mm chamfer at the lower edge and case hardened. Complete with a cylindrical cup, 102mm dia x 50mm depth, one measure 75mm dia x 50mm deep and a tamping rod of circular cross section 10mm in diameter and 230mm long, rounded at one end. Optional Accessories : The following accessories are not part of the standard supply and are supplied at an extra cost. Test Sieve 10mm, 12.5mm and 2.36mm opening. Laboratory Oven. Automatic Blow Counter. Electronic Balance 500gm x 100 mg / Two Pan Balance.  

• Application: Bitumen Marshall stability test
• Power supply: 230 volts, 50 hz, single phase, AC Supply
• Place of Origin: Gujarat, India
• Loading rate: 50.8 mm/min
• Proving ring: 30 KN Capacity
• Rammer weight: 4.5 kg
• Breaking head assembly: complete with gauge disc and flow meter
• Mould Diameter: 4 Inches (100 mm)
• Port: Gujarat, Ahmedabad
• Rammer free fall: 47.7 cm
• Model Number: TM-041D
• Load frame: 50 KN Capacity

• Application: Hospital
• Material: Plastic
• Measurement Range: 1.1-33.3 mmol/L
• Box Contents: 1
• Display: analog
• Result Type: Semi-Quantitive

Compression Testing Machines (All Models) Analogue, Digital, Micro Processor Based and Automatic Compression Testing Machines (AIM 302 - AIM 320)   Concrete is a man-made material, essentially mixed at site. The properties of concrete depend on the properties of its ingredients and their proportion and it is likely to  vary from mix to mix. Tests must be conducted, therefore, to ensure that the concrete used is in accordance with design specifications. A frequent test, is the test of compressive strength, in which concrete samples are tested to failure. Compression Testing Machines : Aimil Series Compression Testing Machines are the finest of their types available. Their rugged construction and extreme simplicity makes it possible for even non- echnical personnel to operate them with ease and complete dependability. In particular, the portable units, which are small in dimensions, sturdy and light in weight, make quality control testing possible in areas where commercial testing facilities are not available and where the transportation of larger and much heavier machines would be difficult.Aimil Compression Testing Machines conform to IS: 14858(2000) and calibrated with an accuracy of ± 1% as per the requirement of 1828(Class1) . It can also be supplied as per BS : 1881 and other associated International Standards. These machines are available in 50kN, 100kN, 500kN, 1000kN, 2000kN, 3000kN & 5000kN Capacities. Compression Testing Machines Classification : Analogue models. Digital models with pace rate indicators. Micro Controller based models with automatic pace rate controllers. Fully Automatic models. Salient Features of Compression Testing Machines are : High stability. Self-aligning platen assembly. Load Gauges are calibrated in kN against certified Proving Rings, traceable to NPL / NCCBM. Suitable for testing cubes and cylinders of various sizes. Using special platens, bricks can also be tested. Logged data printing facility through a parallel port interface available in digital and micro controller ased versions. Calibration process accreditated by NABL (National ccreditation Board for Laboratories). Machines with CE mark also available, on special equest. Operator’s safety features like metal door with a erspex window and overload tripping device are  provided in all models. Application Compressive Strength Measurement Industry Civil Infrastructure Cement/RMC Construction Chemicals Dams & Tunnels Fly Ash Irrigation Railways Sleepers Real Estate Refractories Roads, Highways & Bridges Education Architecture Building Technology Civil Department Geotechnical Science Colleges Metal & Material Tiles & Ceramics Special Applications Fly Ash Traffic & Transportation Railways Roads, Highways & Bridges

• MODEL NO.: KHPD-I
• Pressure Range: 0 To 99.99 Kg/Cm2, 0 To 250.0 Kg/Cm2 (For Bursting)

The "Kaiser" Hydrostatic Pressure Testing Machines are used to find out the resistence to internal pressure of R-PVC,C-PVC,U-PVC, MDPE, HDPE, LLDPE, Pipes, Fittings, Valves etc. as per IS, BS, ASTM and other equivalent standards. The "Kaiser" Pressure Testing Machines are designed keeping versatility in mind to perform with different applications as specified in international Standard. Kaiser's computerized model is suitable for many praecox applications of Gas pipes, Hosepipes and for the organisations with quality & quantity manufacturing base of above products.

Automatic handling, storage, and distribution of the products become easy with our automated warehousing system. Also, our storage facility is timely upgraded to meet the changing market scenario. Experts' assistance is what makes our packaging reliable and highly durable as well. The packaging material used is certified and experts approved to ensure complete safety.

Tile Flexure Strength Testing Machine (AIM 460), Civil Infrastructure-Construction Chemicals, Railways Sleepers, Refractories, Dams & Tunnels. Metal & Material-Tiles & Ceramics

Hardness Testing Machine, quick change chucks, Sleeves, Drill Chucks

Hardness Testing Machine, cnc tapping system, hydraulic chucks, Adaptors

plastic testing machine, plastic testing equipments, Street Light Poles

Glucometer Control Test Machine, Table Top Pulse Oximeter, Omron BP Machine

digital testing machine, Digital Temperature Indicator, HV Spark Tester

Computerised Hydrostatic Pressure Testing Machine, air circulating oven