Testing Machines Dealers in Paldi, Ahmedabad

The company is engaged in the process of making available high quality Universal Strength Testing Machine. The range of Universal Strength Testing Machine made available by us is manufactured using high quality materials and is hence, very durable and efficient. Our range of Universal Strength Testing Machine is available at competitive prices. Description : Testometric produce wide frame versions of their AT and CT universal strength testing machine. Tailored to suit customer’s specific applications Extension Measurement Full frame length to 0.001mmResolution 0.001 minAccuracy 0.01mmAbsolute, relative and auxiliary modes mm, inch and percentProgrammable extension limits Force Measurement Universally calibrated, better than Grade 0.5 EN 7500-1, DIN 51221 ASTM E-4AFNOR A03-501Range 0.4% to 100% minimumAutomatic identification of load cellResolution 1 part in 500000 with auto-rangingElectronic load cell protection Load Frame Rigid frame, using dual slide crosshead guidance system and rigid extruded support column Frame stiffness 5kN/mm plus K factor facility built-inRe-circulating ball screw with bellowsElectronic limit trips, total travel trips and customer programmable safety stopsRubber mat front protection Speed Control Drive system temperature and current protectionPositional jog speed 0.001mm/min to maximumSpeed setting increments 0.001mm/min. Software : Comprehensive winTest™ Analysis universal windows software covering tensile, compression, peel, shear, tear, cyclic, creep and multi stage testing. It includes a wide range of industry standard test methods and facility to create and store an unlimited number of further test methods. There is automated storage of all test data and ease of export to other software packages such as word, excel, access and SPC systems for enhanced report generation.

• Brand Name: EIE

We are offering Compliance with following Intaernational Standards IS : 14858 - 2000 Introduction The digital compression testing machine has been designed to meet the need for a simple, economic and reliable means to test concrete for its compressive strength. The design expressive of simplicity, both of construction and operation, makes the machine easy to use and maintain. The digital machines are provided with a MANUAL pace rate controller, to enable maintain a constant rate of loading. The Complete unit comprises a Loading Unit which is of four pillar model construction, having a cross-head with a spherical seated platen. The lower platen is attached to the top of the piston. The Loading capacity is of 1500 KN, Cubes up to 200 mm & Cylinders up to 150 mm Diameter x 300 mm Height can be tested using the appropriate spacers. The pump facilitates rapid approach of the platens for daylight closure and also provides comprehensive control over the application of load. A control valve provides fine control over the loading rate for accurate pacing. Maximum load is held and retained for approximately 15 minutes, unless cancelled, using the panel mounted reset switch. Salient Features of EIE - Digital CTM Machine · 4 line Alphanumeric display with backlit, displaying - Actual Load, Peak load, Rate of loading and Calculated load in Nmm² · Direct reading of compressive strength in Nmm2 - No calculation required · Peak hold facility · Can manually control pace rate from 1 KNSec to 9 KNsec

Although generally not such an important property of concrete than compressive strength, tensile strength values are often important to know when the concrete used free of reinforcement and may be subjected to some tensile force. The test method essentially involves applying a load at the centre of a beam of concrete supported at its ends. The load required to break the specimen is then recorded. Salient Features: The machine consists of a motorized load frame. The lower platen has two rollers, the distance between which is adjustable. For 150 mm x 150 mm x 700 mm beam, the centre distance between the rollers is 600 mm, while it is 400 mm for beams of size 100 mm x 100 mm x 500 mm. The upper platen has also a pair of rollers whose distance adjustable. It is 200 mm centre to centre, for 150 mm x 150 mm x 700 mm size beam and 133 mm for 100 mm x 100 mm x 500 mm size beam. Total capacity of the machine is 100 KN. 150mm dia pressure gauge of 0-100 KN x 1 KN least count to indicate load is fixed on the load frame. A separate electrically cum hand operated pumping unit housed in a cabinet is supplied. On/Off switch and a slow/fast lever to control rate of loading are fitted on the front panel of the pumping unit. A facility for hand operation is provided. A micro switch and relay fitted inside the pressure gauge protect the unit from over loading. Hand operated version consists of a load frame. A small hand pumping unit is attached to the load frame. Since this is a hand operated light weight machine. It is useful for field laboratory also. Optional Accessories (at extra cost): Spare Oil seal Hydraulic Oil ( tin of 5 ltrs) Beam Mould 10 X 10 X 50 cm Beam Mould 15 X 15 X 60 cm Beam Mould 15 X 15 X 70 cm Beam Mould 15 X 15 X 75 cm Trowel Concrete Scoop

• Capacity: 0 to 50 kgm.
• Range: ONE
• Rod to be tested: 8 to 20 mm.
• Load of Measurement: Torque and Twist will be read directly.
• Other provisions: Automatic stop in case of failure of specimen.

A system of loading which causes section of a bar or shaft to rotate about its central longitudinal axis relatively to another such section and which thus produces twist or torsion in the bar, constitutes a torsional load. The load may be composed of forces acting in any direction but the twisting or torsional affect is provided by the couples formed by these forces in planes normal to the central axis. The torsional shearing stresses in circular cross section vary from zero at the axis of the section to a maximum value at the extreme fibres. If no bending is present pure shear exists. Torsion Testing machine Consists of two independent chucks. The twist is communicated through the test piece to the other jaw on which a weighted pendulum is attached. The resistance to deflection of pendulum causes a torque to be applied to the test piece and the angles of deflection of pendulum is the measure of torque. The machine is built for maximum twisting moment at about 50 kgm. It is equipped with jaws for accomo- dating test pieces of 10 mm, 15 mm and 20 mm size either square or circular with square shoulder.

The "Kaiser" Hydrostatic Pressure Testing Machines are used to find out the resistence to internal pressure of R-PVC,C-PVC,U-PVC, MDPE, HDPE, LLDPE, Pipes, Fittings, Valves etc. as per IS, BS, ASTM and other equivalent standards. The "Kaiser" Pressure Testing Machines are designed keeping versatility in mind to perform with different applications as specified in international Standard. Kaiser's computerized model is suitable for many praecox applications of Gas pipes, Hosepipes and for the organisations with quality & quantity manufacturing base of above products.

• Automation Grade: Semi Automatic
• Capacity: 1500 Kn
• Country of Origin: Made In India
• Brand Name: Royal
• I Deal In: New Only
• Packaging Type: Iron
• Display Type: Digital

Flexural Strength (AIM 332)   The Flexure Strength Testing Machines are designed to test flexural strength of concrete beams. The design provide maximum rigidity throughout their working range. The load is applied by the downward movement of the piston. A spacer is provided for testing different size of beams. The load is indicated on a calibrated bourdon tube type load gauge of range : 0 -100 kN x 0.5 kN The load gauge is calibrated against National Physical Laboratory / National Council for Cement and Building Materials certified proving ring.   Flexure Testing Machines Salient Features: Light weight, rugged high strength frame Double action hydraulic pump Self-aligning roller assembly Hydraulic jack provided with retraction spring For testing beams of 100X100X500mm and150X150X 700mm. Suitable for operation on 220V, 50Hz, Single Phase, AC supply (For Electrically Operated Flexure Testing Machine).   Industry Civil Infrastructure Cement/RMC Construction Chemicals Dams & Tunnels Fly Ash Irrigation Railways Sleepers Real Estate Refractories Roads, Highways & Bridges Education Architecture Building Technology Civil Department Geotechnical Science Colleges Metal & Material Tiles & Ceramics Special Applications Fly Ash Traffic & Transportation Railways Roads, Highways & Bridges    

• Application: Bitumen Marshall stability test
• Power supply: 230 volts, 50 hz, single phase, AC Supply
• Place of Origin: Gujarat, India
• Loading rate: 50.8 mm/min
• Proving ring: 30 KN Capacity
• Rammer weight: 4.5 kg
• Breaking head assembly: complete with gauge disc and flow meter
• Mould Diameter: 4 Inches (100 mm)
• Port: Gujarat, Ahmedabad
• Rammer free fall: 47.7 cm
• Model Number: TM-041D
• Load frame: 50 KN Capacity

Tile Flexure Strength Testing Machine (AIM 460), Civil Infrastructure-Construction Chemicals, Railways Sleepers, Refractories, Dams & Tunnels. Metal & Material-Tiles & Ceramics

• Brand Name: Hopkinson’s

We offer the customers hopkinson’s test dc machine. The hopkinson’s test dc machine designed to demonstrate the fundamental concepts and also facilitates easy learning about the various losses of dc machine. One can also determine the efficiency of dc machine by separately calculating the losses. technical specifications 200 v fixed dc : 0 - 200 variable dctype : dc shuntvoltage rating : 200 vrpm : 1500 (no load)insulation : class 'b',’f’voltmeter : 300 vammeter (2 nos.).

User conduct shear, puncture, tear, bonding etc. test  PC communication via RS-485 converter for fast data collecting and every moment data collection to analyze product at each and every point.  User friendly software Easy installation of window based software in computer Over load and over elongation safety features is provided through software and PLC Auto graph scales on X axis as well as Y axis Software presents test results in tabular and graphical formats Configure the test using a standard test setup template which is pre-formatted for each type of test Report generation is through PLC via RS-232 to RS-485 converter Pre define profile feed to switch over from one test method to another test method

Automatic handling, storage, and distribution of the products become easy with our automated warehousing system. Also, our storage facility is timely upgraded to meet the changing market scenario. Experts' assistance is what makes our packaging reliable and highly durable as well. The packaging material used is certified and experts approved to ensure complete safety.

• Application: Hospital
• Material: Plastic
• Measurement Range: 1.1-33.3 mmol/L
• Box Contents: 1
• Display: analog
• Result Type: Semi-Quantitive

plastic testing machine, plastic testing equipments, Street Light Poles

Computerised Hydrostatic Pressure Testing Machine, air circulating oven

Charpy, Toxicity Tester, HTC LCR-4070 Digital LCR Meter, Analog Multimeter

Foam Flex Tester, Pick Glass, Mini Compass, Round Cutter for GSM

Colour Matching Cabinet, Toxicity Tester, Bar Bending Machine

digital testing machine, Digital Temperature Indicator, HV Spark Tester

Cube Test Machine, Slab Trolley with Rails, electrical meter