Tile Adhesives Dealers in Makarba, Ahmedabad

FTA (Floor Tile Adhesive) Product Description: "MYMIX ‐ FTA (Floor Tile Adhesive)" is a thin set Cementitious dry mix mortar For installing Ceramic, Vitrified tiles and natural stones for interior floor applications. "MYMIX ‐ FTA" is polymer modified tile adhesive which make it ideal for fixing tiles, natural stones and granite to most building substrates. Application: Specially for interior floors and walls Small and medium size tiles fixing For Internal use and External use Enquiry Advantages: Easy to Apply, single component adhesive Extended open time Superior adhesion properties with adhesion to varies substrates Suitable Substrates: Concrete wall and floor area Tile - on - tile aplication Cement mortar beds Dual purpose for floor and wall with good adhesion workability Suitable for solid subfloors Thin - set cementitious screeds Cement Plaster Packing: 25 kg. Project packing of 40 kg size is available on demand Shelf Life: Factory sealed bags are best before 12 months from the date of manufacturing in unopened condition stored in dry area How to Apply : Add 25 kg of “MYMIX‐FTA (Floor Tile Adhesive)” to approx. 6.5 litres. To 7.5 litres. Of cool and clean tap water and stir properly for 5 minute by hand or an electric stirrer to get a smooth and homogeneous mixture After stirring wait for 10 minutes, stir once again and apply the adhesive on the subfloor with the recommended adhesive notch trowel Press the tiles within 15 to 20 minutes with a shuffling movement in to the adhesive. Check regularly to ensure that the back of the tile is in full contact with the adhesive. Remove excess adhesive immediately from the joints The proper preparation of the surface will make the fixing easier and quicker ensuring a better finish. The surface should be flat with a tolerance of 4mm over a distance of 2 meters. It is essential that you waterproof wet areas prior to tiling. New concrete is recommended to be 1 month old for every 25mm thickness and completely dried before tiling. Under normal circumstances, i.e. a temperature of 20° C and a relative humidity of 65%, the joints may be filled after minimum 24 hours.

• Type: Tile Adhesives
• Material: BOPP Film, PE, PET, Polyimide, PTFE Fabric
• Color: Creamy, Green, Orange, Pink, Sky Blue, White, Yellow
• Application: Tiles Use
• Width: 0-10cm, 10-20cm, 20-30cm, 30-40cm, 40-50cm, 50-60cm, 60-70cm, 70-80cm, 80-90cm, 90-100cm
• Adhesive: Acrylic Based, Nature Rubber, Pressure Sensitive, Silicon
• Adhesive Side: Double Sided, Single Sided
• Feature: Antistatic, Heat Resistant, Holographic, Waterproof

•  :  
• Alumina Content: 80% minimum
• Compressive strength: 1500 kg/cm2
• Flexural strength: 350 kg/cm2
• Tensile shear strength: 170 kg/cm2
• Hardness Shore D.: 95D.
• Max. Operating Temp C.: 180 to 200 deg. C
• Working time 30 deg. C.: 30 to 40 minutes
• Kit Size: 10 & 30 kgs.
• Coverage: 4 kg/M2 WITH 3MM THK

Tiles Adhesive, Sanitaryware, Kitchen Sink

marble adhesive, Laminated Magnesium Oxide Board, cement cover block

Tile Adhesive, Floor Tiles, Bathroom Accessories, Fittings, Water Softner