Tile Adhesives Dealers in Thaltej, Ahmedabad

• Color: White
• Mixing ration: 5.6 to 6.4 ltrs/ bag 20 kg power
• Pot life: ≥ 4 hr
• Open time: ≥ 30 min.
• Adjustability: ≥ 45 min
• Bed thickness: 1.5mm to 10mm
• Grouting: ≈ 8 hr on wall / ≈ 24 hr on floor
• Packing: 5 Kg & 20 Kg Bag.
• Shelf Life & Storage: 12 months with original packing in dry storage place

Dubound's Power is a single component white adhesive. That is functional for high resistance laying of ceramic tiles, glass mosaics and homogeneous tiles. The tacking polymers deformability (superior speradability) and fine finishing of the material affixed.Areas of Application Facades, heat-radiant slabs, flooring and walls, indoor/outdoor use, in civil, industrial and commercial applications and for street furniture, in areas which are humid and subject to thermal shock and freezing. Floors and walls, for internal and external use Laying of ceramic and homogeneous tiles of all types, glass mosaic, stable marble and natural stone on flooring and walls, on cement-based deformable and non-absorbent substrates and heated subfloors. Suitable for homogeneous tiles, ceramics, large formats, low thickness slabs and stable natural stone Thicknesses up to 15 mm. Features & Benefits  : Guaranteeing the long life of floors and coverings subject to large temperature variations Mineral adhesive for high-performance, high-deformation laying or overlaying with no vertical slip Power develops high transversal deformation along with high resistance to the stress of water and freeze/thaw cycles Single-component with very low volatile organic compound emissions Preparation of substrates In general, cement-based substrates must be free from dust, oil and grease, dry and free from any rising damp, with no loose, flaky or imperfectly anchored parts such as residual traces of cement, lime and paint, which must be totally removed. The substrate must be stable and without cracks, must have already completed curing hygrometric shrinkage and must present suitable mechanical resistance levels. Undulated areas must be corrected with suitable smoothing and finishing products. Non- absorbent substrates : Smooth, non-absorbent substrates which are compact and wellanchored must be prepared by cleaning with products suitable for the type of dirt present. If chemical cleaning cannot be carried out, proceed with mechanical abrasion by means of sand-blasting or scarification of the superficial layer and, if necessary, correct the surface with suitable levelling products. High- absorption substrates : On screeds and plasters which are highly absorbent and have dusty flaky surfaces it is advisable to apply one or more coats of HydroPrime a professional, concentrated water-base, surface insulation product, in accordance with the instructions, to reduce water absorption and to improve spreadability of the adhesive. Preparation of Adhesive Paste Prepare Power in a clean container, first of all pouring in a quantity of water equal to approximately . of that which will be required. Gradually add Power to the water in the container, mixing the paste from the bottom upwards with a low-rev (≈ 400/min.) helicoidal agitator. Then add more water until the desired consistency is obtained. The mixture must be homogeneous and without any lumps. For best results, and to mix larger quantities of adhesive, a stirring device with vertical blades and slow rotation is recommended. Specific polymers with high-dispersion properties ensure that Power is immediately ready for use. The amount of water to be added, indicated on the packaging, is an approximate value and will vary between the Power. It is possible to obtain mixtures with a more or less thixotropic consistency, depending on the type of application. Adding extra water does not improve the workability of the product, and may cause shrinkage in the plastic phase of drying and result in less effective final performance with a reduction in compressive strength and adhesion to the substrate. Application Power should be applied with a suitable toothed spreader, to be chosen according to the size and characteristics of the rear surface of the tiles. It is best to use the smooth part of the trowel to spread a fine initial layer, pressing down hard so as to obtain maximum adhesion to the substrate and to regulate water absorption, after which the thickness can be adjusted as required by tilting the spreader at an angle. Spread the adhesive over a surface area which will allow for laying of the covering materials within the indicated open time, and check for suitability of the adhesive at regular intervals. The open time may vary considerably even during the application, depending on various factors such as exposure to sunlight, air currents, absorbency of the substrate, temperature and relative humidity of the atmosphere. Press down each tile to allow for complete, uniform contact with the adhesive. In the case of laying in environments subject to heavy traffic, in outdoor locations, on underfloor heating systems or with materials to be smoothed on-site and with formats > 900 cm2, the double-spread technique must be used, which ensures laying procedures on fresh adhesive, 100% coverage of the rear of the tiles and maximum adhesion. In general, ceramic tiles do not require preliminary treatment, however these materials should be checked to ensure they are free from traces of residual dust or materials not properly anchored to the surface Special applications : Partial replacement of mixing water with Tuffex AD professional elastomeric latex enhances the adhesive’s capacity for transversal deformation. The real necessity for deformability of the laying system must be verified, as use of an excessively deformable adhesive together with highly-rigid substrates and laying materials may cause breakage and early unexpected yielding of the covering materials when placed under heavy and concentrated strain or loads. To define the percentage of Tuffex AD to be added, on the basis of the various factors related to the system, consult the Dubond Products (India) Pvt Ltd’s official web site. Elastic joints : Provide desolidarisation joints and elastic fractionizing joints for areas of 20/25 m2 in indoor applications, 10/15 m2 in outdoor applications and for every 8 metres length in the case of long, narrow applications. Structural and string-course joints have to be marked on the external facade.   Elastic joints : Do not use on gypsum-base plasters and anhydrite screeds without the use of HydroPrime a professional concentrated, water-base, surface insulationproduct; on plastic or resilient materials, metals and wood; on substrates subject to continuous moisture rising Do not use the adhesive to correct substrate irregularities greater than 10mm Lay and press tiles onto fresh adhesive, making sure it has not formed a surface film the temperature, ventilation and absorption of the substrate and covering materials may vary the adhesive workability and setting times Protect against direct rain and freezing for at least 24 hours Use a toothed spreader suitable for the format of the tiles Use the double-spread technique for all outdoor laying   Coverage This shall depend on the nature and flatness of the surface and the method of application, but at 1.5 mm thickness it is approximately 100 sq. ft for 20 kgs bag with a "v" notch (3mmx3mm) trowel when using a solid-bed trowel. For good coverage, itis vitally important tha tall surfaces should be clean, smooth, plumb, level and free from defects and undulations.

• Brand Name: Dubond

We offer tile adhesives. Tile adhesive is a grey or white cement based higher grade polymer modified high-strength, flexible tile adhesive for fixing of any type of tiles on interior and exterior situation. It has a special function that works specifically to counter conditions such as external pressures on cladding tiles of the skyscrapers and large format tiles with overlaying on existing floors. It is a secure professional method of laying and has deform ability up to 10 mm thickness.

Keeping the stern check on packaging procedures, we ensure that the products are packed using the finest packaging material, followed by a stringent check of the whole batch by the professionals. To make our transactions secure, we allow our clients to make payment through both offline and online mediums.

• Product: tiles adhesive

Bathroom Tiles Adhesive, 20 kg colour white  Price - $8 per bag  MOQ- 1 pallet  Delivery days - 10 days 

• Brand Name: Dubond
• Classification: Epoxies
• Grade Standard: Industrial Grade
• Packaging Size: 10 kg
• Features: Water Resistant
• Surface of Application: Ceramic, Wood, Glass, Ply
• Form: Powder & Liquid
• Origin: Natural
• Packaging Type: Bucket & Bottle
• Minimum Order Quantity: 5 Pack

• Coverage Approximately: 30 to 40 sq.mtr. / ltr.
• Spec. gravity: (20°C): 0,820 gr. ⁄cc
• Flashing point: 46°C

FLOOR SEAL is a water and oil-repellent product excellent as a dirt proof and stain proof for honed or polished porcelain stoneware. Effective against oil, grease, beverages, felt-pens stains, it offers a protection without changing the look nor the original colour of the floor. It does not form a film. The high penetration power of FLOOR SEAL allows a protective action which proves extremely effective and lasting for a long time. X

• Brand Name: MYK Laticrete
• Types: Cement
• Form: Powder
• Packaging Size: 20 Kg
• Model: MYK Laticrete 307
• Advantages: Ideal for fixing ceramic tiles on floor & wall,Exceeds ANSI A 118.1,Extended open time,Smooth&Creamy

Tenax Fluid Marble Adhesive, Ormat Stone Cutting Blade

Features • Single component • Easy to apply • Self curing • Non-shrink • Excellent adhesion properties • Ready to use as only water needs to be added   Applications • Used for interior and exterior floor and wall applications • Used for fixing ceramic tiles, vitrified tiles, porcelain tiles,natural stones, granites and marbles

Roff STA, Fugabella Eco Porcelana 0-5, Benchmark Electric Geyser