TowerTech Cooling Systems Pvt. Ltd. Narol, Ahmedabad, Gujarat

Spray cooling tower the air flow is opposite to the water flow. Air flow enters to an open area under the fill media, and is then drawn up vertically. The water is sprayed through pressurized nozzles near the top of the tower, and then flows downward through the fill, opposite to the air flow.

Requirement When The Air Passes Through The Drift Eliminator. Water Droplets Are Separated From The Air Drift At The Three Direction Change Points On The Drift Eliminator. For Cross flow Tower Applications, The Almost Vertical Water Conduits Provided by the CD-100 Drift Eliminator Remove the water droplets out of the drift eliminator area and return them back into the tower and does not allow any re-entry.Drift Eliminators, Made Out Of Rigid PVC, Are Designed To Remove Entrained Particles From Air Steam Efficiently, With Minimum Pressure Drop, Thereby Reducing The Fan Power

Pultruded cooling tower is made of Fibre-Reinforced Plastic (FRP ) is known for its high corrosion-resistance capabilities. FRP is a composite material.. The fibres are usually glass, carbon, or aramid, although other fibres such as paper or wood. Pultuded FRP is produced using pultrusion technology, and has become the most common structural material for small cooling towers. It offers lower costs and requires less maintenance compared to reinforced concrete, which is still in use for large structures. FRP cooling tower are commonly used in the aerospace, automotive, marine, and construction industries.

Induced Draft Cooling Tower Induced draft cooling tower — Its a mechanical draft tower alongwith a fan at the discharge which pulls air up through the tower. The fan induces hot moist air out the discharge. This produces low entering and high exiting air velocities, reducing the possibility of recirculation in which discharged air flows back into the air in take. This fanfin arrangement is also known as draw-through

Fanless cooling tower is working on the principle of evaporative cooling. In which hot water comes directly in to contact with ambient air and cooling is achivead mainly by small portion of water gets converted to vapour,

Evaporative cooling towers for providing cool water for air-conditioning, manufacturing and electric power generation. The smallest cooling towers are designed to handle water streams of only a few gallons of water per minute supplied in small pipes like those might see in a residence,

Counterflow cooling tower are designed to handle water streams of only a few gallons of water per minute supplied in small pipes like those might see in a residence, while the largest cool hundreds of thousands of gallons per minute supplied in pipes as much as 15 feet (about 5 meters) in diameter on a large power plant.

Cooling counter design, the air flow is opposite to the water flow. Air flow enters to an open area under the fill media, and is then drawn up vertically. The water is sprayed through pressurized nozzles near the top of the tower, and then flows downward through the fill, opposite to the air flow.