Turbine Pumps Dealers in Ahmedabad

• Shape: Vertical
• Application: Industrial
• Voltage: 220V
• Material: Cast Iron

a wide range of vertical pumps are available for handling clear water or contaminated water application. These pumps are designed to operate at 50hz and 60hz , in single or more than one stages according to head required. These pumps consisting of bowl assembly, column pipe-assembly, bearing housing assembly along with n.r.r (non reverse ratchet) assembly & motor stool/driving unit assembly. range capacities up to 20,000 m3/hr, head up to 300 mtrs. bowl sizes from 100mm to 1600 mm constructions • self-water lubrication, oil lubrication external water lubrication • motor water lubrication] • combination motor-gear drive above ground / under ground discharge • standard / special material of construction. applications • general water pumping /conveying used for various industries. • spray and injection water in sugar industry. • cooling tower circulation. • irrigation and drainage for agriculture. • process and cooling water pumps for power plants. • fire fighting. • tube well irrigation / open well irrigation and river / canal irrigation • sprinkle irrigation • urban water supply / rural water supply • domestic water supply in high rise building and water fountain. • raw & threaded water services / mine dewatering. • fire fighting services. • on line boosting • oil / petroleum handling services. special features • vertical pumps take little space in plan since the liquid in led away to the axis of shat. • the impeller is submerged, so pump does not require to be primed and is always ready to use. • the suction condition also prevents the caviation in the pump and pitting in impeller & diffuser. • due to positive head at suction the pump gives its rated performance as well as high ovarall efficiency, whereas in horizontal pumps due to losses in suction line,foot valve etc. The rated performance of the pumps is not achieve.     techanical specification bowl assembly:- bowl assembly consists of suction bell , impeller , bowl, pump shaft. suction bell:- suction bell designed for smooth & steady entrance of liquid with minimum losses. bowl :- the bowl is a casing with diffuser vane cast integrally to reduce the velocity of the liquid coming from impeller & increasing the pressure. impeller:- impellers are of open (propeller),semi-open (mixed flow) & closed (vertical turbine) type depending upon the specific speed of pumps and are accurately machined ,dynamically & hydraulically balanced. shaft:- the shaft is of high tensile strength steel. column pipe assembly:- it consists of column pipe, line shaft & line shaft bearing. column pipe:- casted or fabricated, it houses line shaft bearing retainer. line shaft bearing:- line shaft bearing provided in leaded bronze shell with cut less rubber (natural/synthetic) bearing lubrication self or pressurized external water. trust bearing assembly:- anti friction bearings are provided to take care of axial thrust & weight of rotor assembly as well as radial load. Lubrication with oil/grease non reverse ratchet are provided with thrust bearing housing assembly to avoid the rotation of impeller (pump) in opposite direction causing opening of the threaded coupling. discharge head / discharge elbow:- either cast of fabricated designed to direct flow from column pipe to discharge pipe. It may be on ground level or below ground level. motor stool:- m.s fabricated heavy duty to ensure vibration free operation. couplings:- for line shaft threaded barrel or muff type coupling as per requirement. For pump to motor pin bush flexible coupling are provided. direction of rotation:- counter clock wise when viewed from driving end.

• Features: Vertical pumps require a minimum of NPSH since the lowest impeller is submerged in the liquid.

vertical pumping applications require the units be available in a variety of pumping configurations to meet user needs. Fairbanks Morse meets these demands by providing pump bowls from V-6,V-8,V-10 in diameter. Turbine bowls can be staged in series to produce the necessary discharge pressures.Materials of construction include cast iron, bronze, stainless steel and G.I Pipes or other machineable materials. Wear rings are available to provide a renewable surface.Open line shafts allow the product to lubricate the shaft bearings. Enclosed line shafts can provide external water flush, oil, or grease-bearing lubrication. Threaded or flanged column and line shaft assemblies are available in both short and deep-set applications.Drive shafts extending through the discharge head can be sealed using either packing or mechanical seals. A wide range of mechanical seal designs are available along with an assortment of packing box designs, including those for high-pressure applications. Fairbanks Morse also offers an array of discharge head designs, including cast iron or fabricated steel construction, above-or below-ground discharge, and flanged or plain-end discharge connections.Vertical turbine pumps can be driven by vertical monoblock motors, vertical solid-shaft motors, or through right-angle gears by an internal combustion engine, steam turbine, or horizontal motor. operate with gas kate and wind-mill.When vertical monoblock drivers are used, impeller-to-bowl clearances can be maintained with an adjusting nut located at the top of the driver. When vertical solid-shaft drivers are utilized, impeller clearance is regulated with an adjustable coupling.

Jay Agro Turbine pumps are of High quality, rugged, heavy-duty construction designed to successfully operate in a multitude of applications such as pumping from water source including wells, lakes, cooling ponds, tanks, rivers and oceans. These applications include raw water intake, liquid transfer, cooling water circulation, booster service, storm water, flood control, marine, process services, volatile fluids, condensate, fuel pumps and mine dewatering. Jay Agro Turbine pump applications are found in a variety of markets including: urban and rural municipal water, irrigation, chemical processing, primary metals, petroleum, power plants, mines, food processing, offshore platforms, and more. Parameters of vertical pumping applications require the units be available in a variety of pumping configurations to meet user needs. Fairbanks Morse meets these demands by providing pump bowls from V-6,V-8,V-10 in diameter. Turbine bowls can be staged in series to produce the necessary discharge pressures. Materials of construction include cast iron, bronze, stainless steel and G.I Pipes or other machineable materials. Wear rings are available to provide a renewable surface. Open line shafts allow the product to lubricate the shaft bearings. Enclosed line shafts can provide external water flush, oil, or grease-bearing lubrication. Threaded or flanged column and line shaft assemblies are available in both short and deep-set applications. Vertical pumps require a minimum of NPSH since the lowest impeller is submerged in the liquid. However, even when the system design does not provide enough NPSH, vertical turbine pumps can be supplied with its own reservoir or "pot". In this way, submergence required by the first stage impeller can be achieved to ensure reliable performance. Vertical turbine pumps can be driven by vertical monoblock motors, vertical solid-shaft motors, or through right-angle gears by an internal combustion engine, steam turbine, or horizontal motor. operate with gas kate and wind-mill.When vertical monoblock drivers are used, impeller-to-bowl clearances can be maintained with an adjusting nut located at the top of the driver. When vertical solid-shaft drivers are utilized, impeller clearance is regulated with an adjustable coupling.

AAAG Turbo Pump, made of Aluminium alloy, of approximate 1200 lpm capacity at 7 kg/cm2 inlet pressure (2 m depth). The turbine shall have 63 mm Male Instantaneous Inlet and 63 mm Female Instantaneous Outlet, while the evacuation pump shall have 63 mm Female Instantaneous outlet for discharging the evacuated liquid.

• Country of Origin: Made in India
• Head Size: up to 139 meters
• Usage/Application: Ultra-filtration systems, Reverse osmosis systems, Pressure boosting in domestic, civil and industrial.
• Flow range: 0.5 to 4 m³/h
• Head range: up to 139 metres
• Power Rating: 1 phase – 0.75 to 2.20 kW and 3 phase – 0.75 to 2.20 kW
• Rated speed: 2900 rpm

• Country of Origin: Made in India
• Flow range: 0.5 to 4 m³/h
• Rating: 1 phase – 0.75 to 2.20 kW & 3 phase – 0.75 to 2.20 kW
• Rated speed: 2900 rpm
• Head: up to 139 meters
• Usage/Application: Ultra-filtration systems Reverse osmosis systems Pressure boosting in domestic, civil and industrial

regenerative turbine pumps, Radial Piston Motors, Axial Piston Fixed Pump

Ste is one of the leading manufacturing and supplying company of high quality customized turbine pumps in india.

Turbine Pumps, Pressure Booster Pumps, repair electric motors

turbine pump, Pump

Multistage Turbine Bore Pump, Fountain Pumps, ring fit pipes

Vertical Turbine Pump, Pressure Booster Pump, Worm Gear Box

vertical turbine pumps, affluent submersible pumps