Twin Lobe Roots Blower Dealers in Vatva, Ahmedabad

Product Characteristics: Pressure Change automatically when system resistance change. Flow changes in little when pressure change. Different seal type to meet the requirement of varied medium. Advance structure ensuring reliable running, longer lifespan, easy operation and maintenance It can be Water Cooled or Air Cooled as per requirement Application: Widely used in electric power industries, Steel & Metallurgy, cement, textile, food industries.

We are offering Twin Lobe Roots Blower.

There are Positive Displacement Twin Lobe Compressors suitable for a wide range of operating speed to meet the exact capacity requirements of the application. They can do offered pressures in single stage upto 1Kg/cm2. Two stage machine can be offered for pressers upto 1.8- Kg/cm2. These machine can also be used as Exhausters, and for the compression of various gases. Air cooled design  continuous Air Flow  100% oil free Air Air Flow can be vertical or horizontal with adjustable feet V-belt drive can be used for complete rangeshaft center heights to suit motor as per IEC frame size special sealing arrangment suitable for gases othe then Air.   APPLICATION INDUSTRIES   Cement industries suagar industries paper industries Effuent tretment plants pollution control plants textile industries gas booster fertillizer industries chemical industries glass / bilb industries  

Features   Twin Lobe Roots Blower is also well known as Twin Lobe Rotary Compressors / Exhausters / Roots Vacuum Pump, used in various systems and plants like Sewage Treatment Plants. These are High volume-low pressure positive displacement (PD Type Roots Blowers) compressors. They operate on differential pressure and constant volume characteristics.     Twin Lobe Roots Blowers are suitable for different pressure up to 1 Kg/cm2 in Single Stage and up to 2.2 Kg/cm2 in Double Stage. Also suitable for Gas Duty as well as Vacuum Duty (Up to 600 mbar).     Twin Lobe Roots Blowers are used in various applications like Sewage Treatment Plants, Charging of Kilns in Cement and Steel Plants, Blending, Water Treatment Plants, Effluent Treatment Plants, Central Vacuum Cleaning System, Aeration in Storage silos, Pneumatic Conveying System, Dewatering, Air Drying, Chemical Plants, Aeration for fish farmetc.       Technical Specification

Salient Features of TMVT Compressors: TMVT make Twin Lobe Compressors (MTLK / MP / ETP Series) are enjoying tremendous reputation in the market since about 3 decades. Complete range of 18 Models of MTLK type covers requirements of various industries of divers nature. Suitable for different pressure up to 1 Kg/cm2 in Single Stage and up to 2.2 Kg/cm2 in Double Stage. Also suitable for Gas Duty as well as Vacuum Duty (Up to 600 mbar). Blower : The Main Body, Side Covers are manufactured from Graded Cast Iron as per CI IS 210 FG 260. Castings are procured from Foundries of repute like Bhagwati Spherocast, Ductile Iron Foundry, etc. etc. Rotors : The Rotors are of S. G. Iron as per grade 400 / 015 of smaller capacities up to 1500 M3/ Hr. For larger capacities of Twin Lobe Compressors, Rotors are having Lobes in Graded Cast Iron IS 210 FG 260 Construction. All types of Rotors are with EN-8 Shafts. For corrosive gases we supply blower in C.I. construction with electro less nickel plating on contact parts or complete blower in stainless steel construction. Machining : All components are machined to very accurate dimensions with extremely tight tolerance with guaranteed interchangeability. The Castings of Casing and Main Covers (Bearing Housing) are stress relieved after pre- machining for dimensional stability at elevated temperature. Lobe Profiles : The Lobes of Rotors are having involute profile ensuring Uniform clearances between rotor to rotor in any position of two rotors. The profile also ensures uniform clearances between Casing and Lobes unlike providing PTFE strips which is usually done as a cheap method of manufacturing for maintaining clearances. The Rotor profiles are machined on CNC machines and imported Copy Shaping/Planning Equipment ensuring profile with high accuracy/finish which result in power saving. MTLK type blower main chamber is sealed by labyrinth seal. Four numbers piston rings are fitted on each side of rotor. Lubrication : Both side of side casings are oil filled. All bearings and gears are splash lubricated. This increases life of bearings and gears. Timing Gears : The Timing Gears are wide for more load bearing, and having helical teeth, hardened and ground, maintaining backlash within the limit of 0.03 to 0.06 mm to ensure low noise level. Same are either Press-fit on rotor shafts by Tensioning Element or having taper locking on rotor shaft by hydraulic system making mounting and dismounting of Gears much easier. Bearings : In case of Air Cooled Compressors model MTLK, Bearings on the drive shafts have Spherical Taper Roller Bearings to take axial as well as thrust load whereas the gear Shafts have Angular contact Ball Bearings. In case of Water Cooled Compressors Model MP, all bearings are cylindrical Roller Bearings. Cooling : .Air Cooled as well as Water cooled models are available for specific requirements .In case of air cooling, housing surface is cooled by convection cooling. Making fins on the housing surface increases convection. In case of Water Cooling, water is flown in the casing constantly at the specific rate which cools the blower, lobes and oil.. Testing : All the Blower are individually tested with Test Procedure based on IS-10431/IS-5456-Rev. (BANGALORES-726/BS-1571-Part-II-Rev) for capacity, power consumption, temperature rise noise level as well as vibration level. MTLK Models : They are suitable for vertical as well as horizontal flow. In case of vertical flow compact assembly requiring no additional internal piping is being given. MP Models : In this design, for gas duty, there is special arrangement of shaft sealing. In this arrangement FOUR OIL SEALS are provided on Lobe shaft to ensure no leakage of gas to oil chamber. For additional reinforcement to this arrangement, Oil Seal, ‘O’ Ring and after space ring are provided on main shaft. This type of shaft sealing arrangement arrest gas leakage to great extent. LDB Models : They are used for low pressure duty in which gears are cooled by oil on one side and on the other side, bearings are cooled by grease. ETP Models : They are suitable for pressure upto 5000 mm WG. They are good for Water Treatment Plants. They can also used for other duties using Non Return Valves. Blower Unit: The Twin Lobe Compressors as well as various accessories like Two Silencers (for Suction and Discharge), Suction Filters, Safety Valves, Non Return Valves, Anti Vibration Pads, Flexible Bellows, etc. are having robust construction being as per conservative SWISS design. This ensures extremely reliable/trouble free operation and long life for critical process industries like Cement where low speed machines are usually preferred. Accoustic Hood :A drastic reduction of the noise level to 10 to 12 db(A) at 1 M distance is possible by employing a sound insulating hood, which can be opened to allow inspection. This hood can also be retrofitted without modifying the insulation

Blowers, compressors and centrifugal fans are used to pump out gases. It is widely used in industries to maintain air pollution free environment. Apart from that blowers are of different types and each type is destined for specific purpose. Twin lobe roots blower is one among them that is preferred in industries for the following advantages,

• Type: Air Cooled Roots Blower
• Application: Industrial Use
• Weight: 100-1000kg
• Voltage: 110V
• Condition: New
• Automatic Grade: Automatic
• Driven Type: Electric

Twin lobe air compressor capacity 50cmh to 10000cmh and pressure upto 1 kg cm2. Mainly use in rmc plant , etp, stp, wtp, sugar mill, chemical, pharmaceutical industries.

Twin Lobe Roots Blower, Cement Feeding System, bulker unloading system

• Warranty: 1 YEAR
• Country of Origin: Made in India
• Brand Name: AMRUTA
• Motor Power: 50 HP
• I Deal In: New Only
• Model Name/Number: AMI 022

Twin Lobe Root Blower, Root Blower Manufacturer   Wide range of Twin Lobe Root Blower, Root Blower offered by us. We Manufacture a wide range of Twin Lobe Root Blower or Root Blower with the assistance of our engineering excellence. these are positive displacement air blowers can generate pressure up to 1 kg./cm for continuous duty operation find application in effluent treatment plant, chemical industries, cement blending, aeration fluidization, sulphiton process-sugar industry, chemical petrochemical, oil & gas fertilizer, glass industry, dairy industry, pneumatic conveying, ash handling in boiler plants, vacuum cleaning. Range of product from 50 CMH to 2500 CMH. Backed by the rich experience of this industry, we are offering a wide range of Twin Lobe Root Blower or Root Blower. Our adept professionals use quality assured components and ultra-modern techniques to manufacture this blower in line with international quality norms. Our offered blower has its wide range of applications in water treatment plants, aquaculture, and other processing industries. In addition to this, this blower is available in technical specifications to cater the various requirements of the clients We are engaged in offering our clients a comprehensive assortment of Rotary Twin Lobe Roots Blowers. It is manufactured applying an tried and tested volumetric principle, which says the generated volume is proportional to rotation speed, offers 100 % oil-free air and transported gas that is free from contamination. This product comprises two identical twin or tri lobes that rotate in opposite directions.

Twin Lobe Roots Blower, Water Ring Vacuum Pumps, centrifugal process pumps

Twin Lobe Roots Blowers, Liquid Ring Vacuum Pumps

Twin Lobe Roots Blower, Two Stage Liquid Ring Vacuum Pumps

Twin Lobe Roots Blowers, Liquid Ring Vacuum Pumps, direct drive vacuum pump

Twin Lobe Roots Blower, cement feeding systems, mechanical vacuum boosters