Ball Valves Dealers in Ashram Road, Ahmedabad

• SIZE RANGE: 15 NB TO 200 NB(1/2" TO 8")

JACKETTEDBallvalves offer all the proven design attributes of standard 2-way valves and are available in a wide range of different jacket connections, Am Tech jacketed valves are especially used for media that might crystallize or seize and therefore must be influenced through additional heating or cooling, The welded jackets consisting of two shells reach from flange to flange and assure consistent valve heating or cooling of the process media to prevent crystallization or seizing of flow media. This applies especially to media like bitumen, liquid sulfur, resins, etc. In addition, the efficient flow of media is ensured through the elimination of pockets. Oil, steam, water, brine can be used as carrier for heating or cooling media. The special valve design allows the hydrostatic and pneumatic examination of the valve body prior to the jacket welding process. Following our quality assurance rules, every valve is tested again after the jackets have been welded to the body.

We are offering trunnion mounted ball valve. Oswal's trunnion mounted ball valve is the result of innovative engineering. It embodies all the quality, performance, value and safety features required for critical applications. In trunnion mounted ball valve, the ball rotates without moving on the horizontal axis, where as seats are floating and free to move on the same axis. As the pressure increases the force on the seat ring by the pressure pushes towards the ball giving 'bidirectional' sealing. Thrust due to (fluid pressure + spring) both on the upstream and downstream, pushes seat ring towards the ball for positive sealing under all conditions. When the valve is in closed position, the fluid trapped in the body cavity is subjected to thermal expansion and the valve cavity pressure increases. The excessive pressure buildup within the valve cavity is relieved automatically when the pressure inside exceed the spring load on the seat. Internal trunnion reduces the chance of fluid leakage to the atmosphere as in the case of external trunnion mounted ball valves.

UNI DIRECTION/BI DIRECTION KNIEF EDGE GATE VALVE ELECTRIC OPERATED AMTECH makes high performance Knife Edge Gate Valves features with design suitable for specific media.We have unidirectional knife edge gate valves. The gate of knife edge gate valve is made from SS 304, SS 316,SS 410 and we can do the special treatment for lincrease the life span. A wide variety of hardened trim options are also available for the Gate, Seat and Wear Rings. Knife-Edge Gate Valves withstand high temperature & abrasive slurries in Mining, Steel, Power, Chemical, and Paper Industries Ideal for high-density Slurry Lines.We mfg special valves for the Power plants with quick opening design.We have soft seated valves with Teflon ,Nitrile,EPDM,Viton,Silicon etc. Please click on the links below, to know more about each of the knife gate valves   Specification  

They are available made from bar stocks sand casted , investment casting in various materials, likes SS 304,SS 304L ,SS 316 ,SS 316L , IC CF8,IC CF8M,IC CF3, ICCF3M .AMTECH SINGLE PC design are regular exporting valves to Europe, America ,Asia and Gulf Countries .Sizes -14" to 4"(6 NB TO 100 NB).We manufacture valves from genuine guaranteed raw material with material test certiÚcate , hydraulic test certiÚcates , Mill TC 3.1.b available with all supply.

We are offering pvdf ball valves - screwed or threaded ends. Construction end connection m.o.c. (material) pp-isotactic pp-etfe-hdpe-pvdf-ball-valves-screwed-threaded-ends; solid etfeball 3 piece design screwed ends pp single piece stem bsp threaded isotactic pp reinforced ball pph ptfe seated etfe full bore pvdf sizes : 15 mm to 100 mm hdpe

We, along with our veteran packaging professionals, ensure that the packaging products commence keeping the packaging guidelines in consideration. We strictly use quality packaging material to evade loss during transit. In order to ensure zero defects to the products, we have installed automated warehousing system in our spacious warehouse. The system is supervised by well-trained personnel only.

Designed from superior quality material and components, we make available precision engineered Flanged Ball Valves. These Flanged Ball Valves are manufactured under the supervision of experts to assure an optimum range enriched with excellent features. We offer Flanged Ball Valves to various industries where they find varied applications. The clients can avail this efficient range at the market leading price. Applications Petroleum IndustriesPetro-Chemical IndustriesOEM�s like Hydraulic Machine manufacturers Product Details Sizes : ½� to 12�Material : SS-304 or SS-316Standard Followed : IS / APIMinimum Order Qty : 100 Nos Features Good FinishChoice of Pump MaterialsLong LifeEfficient Operation

• End Connection: Screwed
• Material: Stainless Steel
• Country of Origin: India
• Color: Silver
• Type: Stainless Steel Ball Valve

Stainless steel 304/316 /316L standard 

• Material: PVC
• Packaging Type: Box
• Media: Water
• Country of Origin: India
• Application: Industrial
• Brand Name: Ashirvad
• Thickness: 1-10mm
• No of Handle: One
• Length: 5-10mtr., 10-15mtr.
• Speciality: Crack Free, High Tensile Strength, High Ductility

We bring forth a wide gamut of PP Ball Valves. The Polypropylene Ball Valves offered by us are available from 1/2'' to 6'' in size. Made from 100% virgin polypropylene grade, these PP Ball Valves are of performing nature. Each PP Ball Valves is hydraulically tested at 10 kg/cm2. Our PP Ball Valves have dimensional accuracy and resistance to corrosion. Moreover, to cater to distinctive need by providing a wide range of PP Ball Valves at market leading price. Industries : Chemical IndustrySugar IndustryColor and Paint IndustryVarnish plantBreweries and distilleriesWater worksAutomobile industryAgricultureFood and Dairy Industry Industrial Application : For Industrial purpose and Sprinkler/Drip Irrigation System Product Range : 1", 1.25", 1.5�, 2� with Screw End2.5", 3", 4", 6" with Flanged End Heavy Duty Valves Standard : BS -10 (D,E,F) ANSI 16.5 (ASA 150) ND-10-D

• Brand Name: AAIMA

We are offering Grooved Ball Valves. grooved ball valves material:-steel ductiron size:-34" to 12"

• Pressure Rating: 150 class / 300 class / 600 class
• Testing Standard: BS 6364

Cryogenic Valve except Check Valve are supplied with extended bonnet with a sufficient gas column length. Usually supplied by the user, to eliminate any chance of frosting of the packing area."HP" make cryogenic valves are installed on applications involving the production, transport and storage of liquefied gases such as oxygen, nitrogen, argon, natural gas, hydrogen or helium down to -254ºC.

• Model :: BMW
• Actuator :: Single / Double / Acting
• Size Range :: ½" to 2"
• Ball Valve :: 3 Piece Design
• Body :: CF8 / CF8M / CF3M
• Ends :: Screwed / Flanged

3Pcs. Ball Valve With Pneumatic Rotary Actuator  

Principal: Ball Type Check Valves (NRV) B-01 was the first of the valve at Normex with unique design and technology for the first time in India. A very simple and robust design with no mechanism involved. The heart ofб═ valve is rubber coated ball. The mechanism hinge-pin-disc used in conventional check valves is eliminated and Normex has put in this rubber coated ball to arrest flow media in return condition. As the pump starts, the ball moves out totally from the flow path when the pumping is on giving a full bore maximum flow/discharge with minimum head losses. (Fig. A). As the pump stops, the ball rolls back and seats perfectly on the rounded valves seat ensuring totally leak proof sealing.(Fig. B) Salient Features: Lowest possible pressure drop across the valves. 100% leak proof sealing years over years. Non-clogging and self cleaning as ball rotates during operation. Virtually no wear and tear, no maintenance and longer service life. Higher solid handling capacity due to full bore and straight internal path. Lower head loss-high discharge, reduced pumping time-All leading to Energy Saving. Applications: Clean water, Raw water, Sewage, Slurry, Waste water, Viscous liquids etc. Used in industries like: Fire fighting, Plumbing, Water distribution, Water/Sewage treatment, Irrigation/agriculture, Sewage plants, Steel mills, Power stations, Chemical/process industries, HVAC, Sugar/food industry, Breweries, Mining and many more.

• Connector Type: Screwed
• Material: Mild Steel
• Size: 15mm To 200mm
• Brand Name: Racer

• Material: Stainless Steel
• Media: Water
• Automation Grade: Manual
• Packaging Type: Box
• Color: Silver

Scorpio steel ball valves are designed and manufactured to provide maximum service life and dependability. All Ball valves are full ported and meet the design requirements of American Petroleum Institute standard API608 &API 6D. British standard Bs5351 and generally, Conform to American Society of Mechanical Engineers standard ASME B16.34. Valves are available in a complete range of bodybonnet materials and trims.

• Material: NR, PGR, EPDM, NBR, IIR, CR, FPM, CSM
• Body Type: Enclosed or Sealed
• Body Material: Ductile iron (CRN available) or aluminum
• Available size: 1″ (25mm) to 60″ (1500mm)
• Standard Face-to-Face: ASME B-16.10, DIN 3202, ISO 5732
• Temperature: -50deg F to 250deg F
• Actuator options: Electric Actuator or manual hand wheel (120V, 240V, 360V, or 480V)
• In-Line Tube Change: Yes
• Wear Sensor: Yes, option available
• Max. Working: Pressure Up to 300psi (20bar) (consult for higher pressures)

Ball valve handles levers with or without printing of co. name & logos and your required colour & sizes.

the manufacturer and supplier of good quality of Ball Valves. Our experienced professionals are involved in offering optimum worth range of Ball Valves. In this we use quality tested raw material in production process to ensure that the end product is corrosion resistant and robust. End Connection in screwed, Flanged or socket weld, Flanged can be drilled to ANSI, BS & DIN Std.Lever operated, Gear Operated or can be fitted with actuators.

These Ductile Iron Resilient Gate Valves are appreciated by the domestic as well as international clients for their long life and sturdy design. We are stationed amongst credible Manufacturers,

We are offering pvc valve: pvc ball valve, thread ball valve, black valve, butterfly valve, etc. size:20-110mm color:grey body, red handl pvc valve: pvc ball valve, thread ball valve, black valve, butterfly valve, etc.. Standard: din/ bs/ ansi/ jis socket and thread end. 20mm (1/2'' )--- 160mm ( 6'' )

• Size: 15mm To 50mm
• Type: Triclover end Investment Casting Ball lValve
• Brand Name: GURUKRUPA ENGINEERS
• Minimum Order Quantity: 1 Piece

• Size: 2inch
• Material: CI
• Color: Blue
• End Connection: Flanged
• Design: Plain
• Number Of Holes: 5
• Usage/Application: Industrial

• Size: 1/2"-2" (15-50mm)
• CLASS: 400, 800

 SPECIFICATION :      Three-piece construction, Cast/Forged Steel, Floating Ball, Full/Regular Bore, Welded and Threaded Ends. (|) APPLICATION :      Process and general industry, For water, steam, gas, oil and other media, Further applications on request.

Pvc Ball Valves are made from the highest quality grade of Pvc Resin. Its main function is to control the flow of water.

• Material: Cast Iron
• Application: Water Fitting, Oil Fitting, Gas Fitting
• Certification: ISO 9001:2008 Certified
• Country of Origin: India
• Type: Cast Iron Ball Valve

We are offering ball valves globe valves gate valves check valves forged steel butturfly steam traps ptfe lined valves plug valves flush bottom tank strainer. Material astm specification cast iron is 210 gr. Fg 2oo.220260 & s g iron cast steel a 216 gr.wcb,a 217 gr.wc 1 wc6wc 9 a 352 gr.lcb. Cast stainless steel a 351 gr.cf8 cf8m cf3 cf3m forged carbon steel astm a 105 alloy 20, hastalloy b & c astm.a. 351 gr. Cn7m and ck 20 glandless cavity free 2pcs design ball valves….asa#150…….size:15mm to 150mm…flange end diaphragm valves………………………asa & din………………size:15mm to 100mm…flange end butter fly valve……………….awwa asa & din…………….size:50mm to 200mm…wafer type plug valve………………………………asa & din……………….size:15mm to 100mm…flange end flush bottom tank, valves…………….asa#150………………size:40mm to 150mm….flange end