Ball Valves Dealers in Madhupura, Ahmedabad

We are offering pvc valve: pvc ball valve, thread ball valve, black valve, butterfly valve, etc. size:20-110mm color:grey body, red handl pvc valve: pvc ball valve, thread ball valve, black valve, butterfly valve, etc.. Standard: din/ bs/ ansi/ jis socket and thread end. 20mm (1/2'' )--- 160mm ( 6'' )

• Pressure Rating: 150 class / 300 class / 600 class
• Testing Standard: BS 6364

Cryogenic Valve except Check Valve are supplied with extended bonnet with a sufficient gas column length. Usually supplied by the user, to eliminate any chance of frosting of the packing area."HP" make cryogenic valves are installed on applications involving the production, transport and storage of liquefied gases such as oxygen, nitrogen, argon, natural gas, hydrogen or helium down to -254ºC.

• Size: 1/2 Inch, 2 Inch
• Certification: ISI Certified, ISO 9001:2008 Certified
• Color: Grey, Grey-silver, Shiny-silver, Silver
• Pressure: 0-10 Bar, 10-20 Bar
• temprature: 0-50 Deg C, 50-100 Deg C
• Country of Origin: India

We are offering flanged end float valves. While primarily designed for ammonia, this control is also suitable for r-22 and other non-corrosive liquids that have a specific gravity of 0.5 or more. the controller is ideal for the control of the operating level of liquid in liquid refrigerant accumulators and separators. Although this is normally done with a solenoid valve, the controller can activate an alarm or a pump or similar device. construction mechanical float: light deep drawn body drawn in one piece. Ball & stem are made from ss. Electronic control box made from abs in an inter nation size 96x96 housing. This device consists of two separate units, the float chamber and the electrical controller. The float chamber consists of a housing, float ball, float coil and coil enclosure. The float ball is located inside the housing and moves an attached magnetic stem up or down in an enclosure. The construction permits all high voltage connections and wiring to be made at a remote or non-hazardous location. Gravity equalization of the liquid level in the float chamber is a function of the liquid. For fluids having a high viscosity the response time will be slower. The level controller should not be used on water applications.

• Material: Stainless Steel
• Size: 50-100mm
• Country of Origin: India
• Pressure: High, Medium
• Type: Three Piece Ball Valve

• Material: Carbon Steel
• Pressure: High Pressure
• Automation Grade: Manual
• Application: Pipe Fitting
• Size: 25 to 100 mm
• Feature: Blow-Out-Proof, Durable, Easy Maintenance., Investment Casting
• Pattern: Plain
• Country of Origin: India

• Brand Name: PROLINE MAKE
• Material: S.S. 304 S.S. 316 S.S. 316L
• Pressure: PN 05, PN 10, PN 16, 150 #, 300# 600#
• Port Size: 15 MM TO 500 MM
• Type: FLANGE END SCREWED END BUT WELD END THREAD ENDS SOCKET WELD ENDS
• Model Number: PQV-BAV
• Application: Waster treatment plants, water works, power plants, steel plants, cement plants, agriculture industr
• Place of Origin: AHMEDABAD
• Power Supply: ALL TYPES OF POWER AVAILABLE
• Certificate: IP 67 CERTIFIED, EC APPROVED
• Media: WATER, AIR, OIL, STEAM, VACUUM, VARIOUS CHEMICAL, SLURRY, CHILLER WATER AND MANY MORE
• LESS PRICES: quick delivery

• Size: 1.1/2inch, 1.1/4inch
• Type: Ball Cock
• Material: Plastic
• Application: Water Fitting
• Feature: Durable, Easy Installation
• Pattern: Plain

To protect our entire range of products from external factors that can be damaging, we have a state-of-the-art packaging unit equipped with the latest secure packaging technologies and materials. We ensure on time distribution of wholesale as well as retail consignments owing to an extensive vendor, distributor and logistic facility base. The Stainless Steel Ball Valve is dimensionally accurate and low on maintenance.

We are leading supplier of huge range of Ball Valves.

Based in Ahmedabad(India), we have garnered wide acclaim for making available quality and cost effective products to the lengths and breadths of the country. As, we have an extensive distribution system; we can gratify patrons by fulfilling massive requirements and making delivery as per schedule.

• Brand Name: AAIMA

We are offering Grooved Ball Valves. grooved ball valves material:-steel ductiron size:-34" to 12"

• Model :: BMW
• Actuator :: Single / Double / Acting
• Size Range :: ½" to 2"
• Ball Valve :: 3 Piece Design
• Body :: CF8 / CF8M / CF3M
• Ends :: Screwed / Flanged

3Pcs. Ball Valve With Pneumatic Rotary Actuator  

Design Descriptions Full Port Design Split Body Three Pieces Body for 12 &Above Trunnion Mounted BaU Type Blow-out Proof Stem Fire Durable Construction Anti Static Device Stopper Device Flanged or Butt Welding   Applicable Standards Steel Ball Valves API6D Fire Safe Anti Statics SteeL Valves ASME B16.34 Face To Face ASME B16.10 End Flanges ASME B16.5 Butt Welding Ends ASME B16.25 Inspection And Test API 598/API 6D   Materials Of Parts No. Part Name Carbon Steel Stainless Steel 1 Body A216-WCb A351-CF8M 2 Bonnet A216-WCB A351-CF8M 3 Ball A182-F304 A182-F316 4 Stem A276-304 A276-316 5 Seat A105+ENP Al 82-F316 6 Seat Insert   Glass Filled PTFE 7 Seat Spring A313-304 Inconel X-750 8 Seat 0-Ring NPR Vrton 9 Stem 0-Ring NBR Vrton 10 Bonnet Gasket Graphtte+304 Graphite+316 11 Bonnet 0-Ring NBR Vrton 12 Antistatic Spring A313-304 A313-316 13 Lower Cover A216-WCB A182-F316 14 Bonnet Stud A193-B7 A193-B8 15 Bonnet Stud Nut A194-211 A194-8 16 Trunnion A276-304 A276-316 17 Trunnion Bearing 304+ PTFE 316+ PTFE 18 Gland Range A216-WCB A351-CF8M 19 Gland Mt A193-B7 A193-B8 20 Stop Plate Carbon Steel Carbon Steel +Zn 21 Handle   Carbon Steel   Dimensional Datas Of Ansi Class 150 LB   NPS 2 2½ 3 4 6 8 10 12 14 16 18 20 24 26 28 30 32 36 in DN 50 65 80 100 150 200 250 300 350  400  450  500  600 650 700 750 800 900 mm L 7 7.5 8 9.00 15.5 18 21 24 27.00  30.00  34.00  36.00  42.00 45 49 51 54 60 in (RF) 178 190 203  229 394 457 533 610 686  762  864  914  1067 1143 1245 1295 1372 1524 mm L1 8.5 9.5 11.12 12.00 18 20.5 22 25 30.00  33.00  36.00  39.00  45.00 49 53 55 60 68 in (BW) 216 241 283 305 457 521 559 635 762  838  914  991  1143 1245 1346 1397 1524 1727 mm H 7 7.5 8.25 9.25 20.88 24.62 25.62 30.75 31.00  36.25  38.25  43.38  45.25 50.75 55.12 64.12 70.88 80.75 in   177 190 210 235 530 625 650 780 790  920  970  1100  1150 1290 1400 1630 1840 2050 mm W 14 16 20 20 24 24 24 24 32  32  32  32  32 32 32 32 32 32 in   350 400 500 500 600 600 600 600 800  800  800  800  800  800 800 800 BOO 800 mm Wt(kg.) 15 19 27 38 81 140 160 205 260  390  510  750  1200 1400 1860 2100 2530 2970 BW   13.5 15.5 24.5 32.5 76 132 147 182 241  370  495  726  1125 1250 1640 1930 2390 2760   Dimensional Datas Of Ansi Class 300 LB   NPS 2 2½ 3 4 6 8 10 12 14 16 18 20 24 26 28 30 32 36 in DN 50 65 80 100 150 200 250 300 350  400  450  500  600 650 700 750 800 900 mm L 8.5 9.5 11.12 12.00 15.88 19.75 22.38 25.5 30.00  33.00  36.00  39.00  45.00 49 5300 55 60   in (RF) 216 241 283 305 403 502 568 648 762  838  914  991  1143 1245 1346 1397 1524   mm L1 8.5 9.5 11.12 12.00 18 20.5 22 25 30.00  33.00  36.00  39.00  45.00 49 53 55 60   in (BW) 216 241 283 305 403 521 559 635 762  838  914  991  1143 1245 1346 1397 1524   mm H 7 7.5 8.25 9.25 20.88 24.62 25.62 30.75 31.00  36.25  38.25  43.38  45.25 50.75 55.12 64.12 70.88   in   177 190 210 235 530 625 650 780 790  920  970  1100  1150 1290 1400 1630 1840   mm W 14 16 20 20 24 24 24 24  32  32  32  32  32 32 32 32 32   in   350 400 500 500 600 600 600 600 800  800  800  800  800  800 800 800 800   mm Wt(kg.) 19 24 34 48 101 175 200 225 325  485  635  935  1500 1750 2450 2225 2870   BW   14 16 25 34 82 145 155 185 238  375  516  782  1280 1375 2180 1825 2260  

• Material: NR, PGR, EPDM, NBR, IIR, CR, FPM, CSM
• Body Type: Enclosed or Sealed
• Body Material: Ductile iron (CRN available) or aluminum
• Available size: 1″ (25mm) to 60″ (1500mm)
• Standard Face-to-Face: ASME B-16.10, DIN 3202, ISO 5732
• Temperature: -50deg F to 250deg F
• Actuator options: Electric Actuator or manual hand wheel (120V, 240V, 360V, or 480V)
• In-Line Tube Change: Yes
• Wear Sensor: Yes, option available
• Max. Working: Pressure Up to 300psi (20bar) (consult for higher pressures)

the manufacturer and supplier of good quality of Ball Valves. Our experienced professionals are involved in offering optimum worth range of Ball Valves. In this we use quality tested raw material in production process to ensure that the end product is corrosion resistant and robust. End Connection in screwed, Flanged or socket weld, Flanged can be drilled to ANSI, BS & DIN Std.Lever operated, Gear Operated or can be fitted with actuators.

The series 500 valves consists of a wide range of float valves. Valves are available for horizontal mounting and vertical mounting. They are designed to controls the level of liquids in open tanks, ponds, basins, and other similar reservoirs. The series consists of 501-modulationg float valve, 502-float on-off globe type valve, 503- float angle type valve. Additional Relief/Sustaining Function-500 501-Modulating Float Valve 502-Float on/off globe type valve 503-Float on/off angle type valve Maximum Range : 0-300 psig Specifications Globe : 15-80 mm screwed, 50-150 mm Flanged Angle : 50-100 mm screwed, 100-150 mm flanged. Pressure Ratings : 150 & 300 # Temperature Range : -40 to 90 deg.C. Media : Any Liquid Services

We bring forth quality certified Ball Valves the surface of which is treated with paints for corrosion resistance. The ball valve we offer is suitable for handling media like water and oil. It complies with the highest quality standards.

The Ball Valve offered by us is majorly used by various industries in India & Globally. Nilon ball valves are available in regular port, full port, & multi port. Nilon ball valves are smooth machined and strait through flow area totally avoid pressure drop across the valve. Nilon has also design specialty ball valve for various projects.