Butterfly Valves Dealers in Bakrol, Ahmedabad

• Country of Origin: India
• Size: 1/2inch
• Type: Wafer Butterfly Valve
• Material: Carbon Steeel, Cast Iron, Stainless Steel
• Certification: ISO 9001:2008 Certified
• Application: Water Fitting
• Color: Blue
• Feature: Blow-Out-Proof, Casting Approved, Durable, Investment Casting
• Technics: Gear Operated
• Power: Manual, Solenoid
• Pressure: Triple Offset Butterfly Valve
• Structure: Double Half Shaft
• Port Size: 2cm-50cm
• Number Of Way: 2way
• Brand Name: SARANG
• Media: Water
• Temperature Of Media: -20 To 80' C
• Size: 1/2
• Product: wafer type butterfly,
• MOQ: 10

PP Butterfly Valves are the most preferred choice among clients for regulating and isolating the flow of liquefied and gaseous materials in various industrial high pressure applications. These valves are designed using premium quality polypropylene material in conformation with the industrial quality standards. The valves can be accessed in various sizes, shapes, thicknesses, dimensions and connection ends.   

• SS: CS

All valves shall meet API-609 MSS-SP-67 ISO 5272 face-to-face dimensions. Valve sizes from 2" to 12" are rated at 200 psig WOG service and valve sizes from 14" to 30" are rated at 150 psig WOG service. All valves are full rated on dead-end service. All bodies shall be ductile iron 65-45-12 and bi-directional tested in both directions and be bubble tight with zero leakage. Lug bodies shall be full lug rated and all bodies shall be suitable for ANSI 125150 lb, JIS, DIN or B.S. Flanges. Secondary seals shall be self-adjusting. All elastomers, all internal bearings shall be non-corrosive and non-metallic. All seats shall be suitable for 250°F sustained high temperature and capable of 2000 PPM on chlorinated applications. Advantages of Butterfly Valves: • Open and close easily and quickly, effort, fluid resistance is small, can operate frequently. • Simple structure, small size and light weight. • It can carry mud, with the least accumulation of fluid in the pipeline opening. • Low pressure, it can achieve a good sealing. • Good regulating performance. Many different types of valves are used in flow control. They are used for a variety of reasons, such as phase (liquid or gases), pressure, piping restrictions and solids content. Other valves are chosen for their capability to open and close in a quarter turn. Of all the valve types, the butterfly valve is used as a control device for many reasons including some or all of the above. This article explains the workings of a butterfly valve and its operation. The butterfly valve offers many advantages that include quarter-turn, openness for less plugging and good control capabilities. Both manual and control versions are used.

• Media: Water, Air, Fuel
• Size: 24 Inch
• Material: Metal
• Condition: New
• Temperature Range: -20^oC to 180^oC
• Packaging: Bulk

Made from the finest of materials available, our Double Offset Butterfly Valves promise international levels of quality and performance. Our reputation is continuously growing owing to the fact that our goods deliver high levels of client satisfaction. We are well equipped to deal even with urgent orders. The delivery will be done in a short period of time, as soon as possible without any kind of delay.

design features : design and manufacturing : api 609 , bs en 558 , din 3202, iso 5752 flange :ansi , bs , din , iso, uni , jis,as pressure rating: tripple eccentic high perfomance dn40-300: pn16 (200 psi) dn350 & above: pn10 (150 psi) testing: api 598 , mss sp 61 , ansi b16.104

• Technics: Gear Operated, Hard Sealing
• Port Size: 0.1mm-5cm, 2cm-50cm, 51cm-60 Cm, 6cm-20cm
• Application: Gas Fitting, Oil Fitting, Water Fitting
• Color: Blue
• Pressure: Triple Offset Butterfly Valve
• Power: Hydraulic, Manual, Solenoid
• Material: Cast Iron

hello sir,

• Number Of Way: 2way, 3way, 4way
• Size: 1.1/2inch, 1/2inch, 2inch, 4/5
• Technics: Gear Operated, Hard Sealing
• Pressure: 1000 Kpa, 520 Kpa
• Feature: Blow-Out-Proof, Casting Approved
• Port Size: 0.1mm-5cm, 2cm -50cm, 5cm-60cm

Series 20 manually operated diaphragm valve has a flow optimized forged stainless steel body, a diaphragm, a bonnet and manual handle. The stainless steel body is available with various surface finish.   Key Features: Cavity free and self-draining Hermetical separation of fluids from the operating mechanism by diaphragm Fully machined from SS 316L bar-stock– no welded components Fully Autoclavable Full traceability as per EN 10204 3.1 and ASME BPE Various internal surface finish available each with less than 0.40 Ra.

• Material: cast iron
• Code: 5542
• Model: BFV-SLS-CI-SS304d
• Type: Wafer Type
• Size: 65mm to 150mm
• Application: To Regulate flow from close to full opening quickly

• Brand Name: HAWA Valves

We supply every type of Valve. Specially butterfly valve,(center disc design, off center disc design) gate valve,(bolted bonnet api 600, pressure seal bonnet, through conduit api 6d, through conduit api 6a) plug valve,(pressure balanced, pressure balanced) double block and bleed valve,(double block & bleed, double block & bleed, double block & bleed) globe valve,(bolted bonnet, pressure seal bonnet, din) check valve,(dual plate, bolted cover, pressure seal cover) ball valve(fully welded,1 piece, top entry2 piece, trunnion mounted3 piece, trunnion mounted1 piece, floating, 2 piece, floating, 3 piece, floating) in almost each and every size. Category

• Manufacturing Standard: API609/ BSEN 593 (BS 5155)
• Size Range: 50 to 600 mm
• Pressure Ratings: PN10, PN16

SABION is pleased to offer top-of- line product in pipeline flow control. SABION wafer and lugged Butterfly valves have been developed with extensive application, design and manufacturing expertise. These products are produced by employing modern manufacturing practices under a robust quality assurance system. These practices ensure consistent product quality and dependable performance. SABION is pleased to offer top-of- line product in pipeline flow control. SABION wafer and lugged Butterfly valves have been developed with extensive application, design and manufacturing expertise. These products are produced by employing modern manufacturing practices under a robust quality assurance system. These practices ensure consistent product quality and dependable performance. FEATURES Top plate double drilled to fit ISO 5211 dimensions and standard secondary bolt circle dimensions Unique centre-lock seat design virtually eliminates any seat movement during the seating and un-seating of the disc Unique stem retention system to provide blow-out proof stem and easy assembly and disassembly of valve Heavy duty one piece wafer and lugged wafer body designed to withstand specified pressures Nylon coated high strength disc with hand polished disc edge and hubs ensures excellent corrosion resistance to several chemical media Heavy duty square grooved seat design with moulded O-ring seals to serve as flange gasket One piece stem with close tolerances double D drive eliminates the need for disc screws or taper pins Heavy duty bearing absorbs the forces acting on the stem/disc assembly due to line pressure APPLICATIONS Water works Power plants Sewage plants Process industries Chemical and petrochemical plants

• Specialities: Rust proof, Sturdy design, High durability.

Butterfly Valves, Ball Valves, Ball Valves, Ball Valves

Teflon Lined Butterfly Valve, PTFE Lined Valves, PTFE Lined Ball Valves

Butterfly Valves, electric proof mats, contract labour supplier

Butterfly Valve, Globe Valves, Gate Valves, Check Valves, gland flange

Butterfly Valve