Butterfly Valves Dealers in Kathwada, Ahmedabad

• Type: Wafer Type, Sandwich Type
• Brand Name: SYSCHEM
• Size: Up to 42 Inch
• Material: Cast Iron/ WCB/ SS 304/ SS 316
• Pressure: PN6, PN10,PN16,PN24
• Port Size: Up to 42 Inch
• Model Name/Number: SYSCHEM
• End Connection: Flangelss
• Operator: Lever, Gear, Pnumatic Operated
• Valve Size: Up to 42 Inch

• Material: Cast Iron, Stainless Steel
• Power: Manual
• Media: Air, Water, Gas
• Protection: IP 67 Weather Proof
• Applicable temperature: -15+150
• Feature: High durability, Low maintenance, Resistance to wear & tear

Bringing forth wide array of Butterfly Valves, we are amidst the celebrated Suppliers in this field. We are known for providing a qualitative array of products and thus our entire range is strictly checked against varied quality parameters.

• Size: 40MM TO 1200MM
• Type: Wafer Type, Slim - Seal Butterfly Valves
• PRESSURE RATING ASA: 150#, 300#
• SEAT: Neoprene / Nitrile / Viton / Silicon / PTFE Butterfly Valves
• MOC: Cast Iron / Cast Steel / SS 304 / 316, SS 304L / 316L.

• Sizes: DN50 to DN900 ( NPS 2 to NPS 36)
• Pressure Rating: Class 150 & PN10 / PN 16
• Design & Manufacturing Standard: BS 5155, API 609, AWWA C504
• Face to Face Std.: BS 5155, API 609, AWWA C504
• End Connection Std.: BS 5155, API 609, AWWA C504, ASME B16.5 & ASME B16.10
• Testing Standard: API 598
• Type of Bore: Standard (Full Bore)
• End Connection Type: Wafer Type, Lugged Type, Flanged Ends, etc.
• Seat Design: Soft Seat – EPDM, Nitrile, Viton, PTFE, RPTFE, etc.
• Disc Design: Centre Disc, Offset Disc, Double Offset Disc, Triple Offset Disc,
• Operated Type: Hand Lever, Gear, Pneumatic Actuator, Bare Shaft, etc.

Lug Type Butterfly Valves are of different types according to technique of sealing the perimeter of the disc in its completely closed arrangement. Our valves offer very durable as well as flawless performance. Our valves are used in an extensive array of applications in the industries of petroleum, packed water, food products, chemicals, fertilizers, paint etc. They are anti-corrosive and resistant in abrasion in nature. The body seat of this valve is designed to offer very low torque, and a tight shut off with absolutely no leakage.

• Material: Body
• Material: Body
• Sizes: 40 TO 1200 M.M.
• CATLOG FEATURE: MANUFACTURING STD.
• Design std.: As per AWWA C 504, BS 5155 & API 609
• Face To Face: BS – 5155 , AWWA-C 504
• End Connection: Wafer Type, Lugs Type, Flange Type
• Testing STD: As per API 598, ISO 5208
• Operation: LEVER / GEAR / PNEUMATIC ACTUATOR
• C.I., WCB, CF8, CF8M ETC: Body liner
• NITRILE,EPDM, VITON,PTFE: Disc
• 13% cr., ss 304,ss 316: Trim
• AISI 410/304/316: AVAILABLE IN DIFFERENT TYPES
• Design std.: As per AWWA C 504, BS 5155 & API 609
• Face To Face: BS – 5155 , AWWA-C 504
• End Connection: Wafer Type, Lugs Type, Flange Type
• Testing STD: As per API 598, ISO 5208
• Operation: LEVER / GEAR / PNEUMATIC ACTUATOR
• C.I., WCB, CF8, CF8M ETC: Body liner
• NITRILE,EPDM, VITON,PTFE: Disc
• 13% cr., ss 304,ss 316: Trim

Brightech™ Cast Ductile Iron FEP/PFA Lined Butterfly Valve, High Performance, Tight Shut Off, Bi-directional, Wafer or Lug Style, Slim Seal, Integral Stem & Centric Disc Design, Lever / Gear Operated Type suitable for chemical corrossion & temperature resistance.Size Range: 50mm to 500mm Feature & Benefits STANDARD DESIGN Brightech™ Fully Lined Butterfly Valves are design in accordance with face to face dimension of API 609 Specification and suitable to mount between two flanges of ANSI B 16.5 # 150 flanges which permits this valves to replace with any standard Butterfly valve without altering existing piping FEP/PFA BODY & DISC LINER The high quality most advance fluoro-polymers liners on the Butterfly valve is melt–processible, avoids porosity problems.The non sticky properties of the liner ensure high performance of the valve under highly corrosive chemicals in conjunction with high pressure and temperature LOCKED IN DISC LINER The melt-processible fluoropolymer of this Butterfly valve is securely locked in to cast hole of disc, which helps to prevent liner to collapse in vacuume condition and blow out in high pressure conditions regardless of high temperature LIVE LOADED TOP SEALING Live loaded disc spring washers provides constant uniform packing pressure requires no manual seating from the top in running condition TIGHT SHUT OFF A silicon backing strip is provided inside deep machined body groove for the liner, to resist against the disc edge which creates tight shut-off Lining Specification OTHER LINING MATERIAL We offer other lining materials like PTFE, ETFE, ECTFE, PVDF, PP, HDPE LINING THICKNESS Min. 3.0mm/4.0mm overall SPARK TEST Body liners & all wetted parts are spark tested at 20,000 Volts The body material is generally Cast Ductile Iron Alternatively we offer completely CF8 / CF8M Body and Ball.   Copyright © 2007 Brightech Valves and Controls Pvt. Ltd.

• Pressure Rating: PN 10 / PN 16
• DESIGN STANDARD: BS 5155/API 609
• INSPECTION & TESTING STANDARD: BS 6755
• FACE TO FACE: AS PER ANSI B 16.10
• END CONNECTION: WAFER TYPE, FLANGE LESS,SUITABLE TO MOUNT BETWEEN ANSI B 16.5/BS 10/DIN/IS FLANGE
• SIZE RANGE: 1" TO 40"
• OPERATION: HAND LEVER / GEAR / PNEUMATIC /ELECTRICAL ACTUATOR OPERATED

• Butterfly Valve - Technical Specification: Size Range
• 40 NB through 1200 NB: Pressure Rating
• ASME / BS 125# / 150# / 300# / PN10 / PN16 / PN25: Type
• Center Disc, Single / Double / Triple Offset Disc. Fully Lined Body / Unlined Body: End Connection
• Wafer / Lugged / Flanged: Operation
• Wrench / Manual Gear / Pneumatic and Motorized: Port Opening
• Full: Seat
• Metal to Metal / Natural / Neoprene / Nitrile / EPDM / Silicon / Vitone Rubber or PTFE: Disc
• Solid-Dual Shaft / Single Shaft: Gasket & Packing
• Equivalent or better than seat material: MOC
• Ref Material of Construction & Pressure-Temperature Table: Design Code
• API - 609 / BS – 5155 / AWWA C504: Testing
• API 598 / BS 6755 Part - I: Inspection

We are offering butterfly valve. butterfly valve features design std. as per awwa c 504, bs 5155 & api 609 face to face bs – 5155 , awwa-c 504 end connection wafer type, lugs type, flange type testing std as per api 598, iso 5208 size 40 to 600 m.m. material body c.i., wcb, cf8, cf8m etc body liner nitrile,epdm, viton,ptfe disc 13% cr., ss 304,ss 316 dimensions 150 # size m.m f h l 40 37 98 290 50 43 122 290 65 46 130 290 80 46 130 290 100 52 160 290 150 56 180 290 200 60 205 290 250 68 280 250 300 78 310 250 350 78 320 250 400 102 375 250 500 127 425 250 600 154 680 250 *nett. Kg. Aprox (with out any obligation)

• Brand Name: MEGA VALVES
• Material: Cast Iron
• Power: Manual
• Pressure: PN 10/16
• Color: Blue, YELLOW
• Application: Gas Fitting, Oil Fitting, Water Fitting
• Technics: Gear Operated
• Certification: ISI Certified
• Feature: Casting Approved
• Size: UP TO 24 INCH
• Type: TEFLON
• Media: WATER / OIL / GAS
• Temperature Of Media: UP TO 180 D
• Country of Origin: India

• Country of Origin: India
• Size: 1.1/2" to 8"
• Type: Hand Operated Butterfly Valve
• Material: ALUMINIUM
• Application: Gas Fitting, Oil Fitting, Water Fitting
• Feature: Casting Approved
• Pattern: Plain
• Automatic Grade: Manual
• Pressure: High Pressure, Medium Pressure
• Temperature Of Media: -20 Deg C to 120 Deg C
• Number Of Way: 2way
• Color: GRAY
• Brand Name: ALUWING
• Type: GEAR TYPE OPERATED BUTTERFLY VALVE
• Material: ALUMINIUM
• Size: 1.1/2" TO 8"
• Country of Origin: INDIA

• Material: PFA Lined
• Power: Manual
• Country of Origin: Made in India
• Brand Name: Flow Line Valve
• Valve Size: More than 12 inch
• Construction: PFA

• Material: CF8 / CF8M / CF3M
• Country of Origin: Silicon
• Technics: Wafer -Center Disc Design Pharma Butterfly Valves
• Pressure: 6 kg
• Port Size: 150 to 300 mm (6" to 12")

We are offering Want to buy Pharma Butterfly Valves, Choose Jupiter Controls for better price Pharma Butterfly Valves Are you looking for a Suitable Supplier for Pharma Butterfly Valves? Various Pharma Butterfly Valves standards full range,fast delivery, contact Jupiter Controls for all types of Pharma Butterfly Valves. ,Pharma Butterfly Valves suppliers with a wide range of Stainles Steel Pharma Butterfly Valves, Bronze Pharma Butterfly Valves, Cast Steel Pharma Butterfly Valves, Cast Iron Pharma Butterfly Valves, The strength of our company lies in the strength of personnel who produce quality work. We believe in cohesiveness and team effort. The company is following the policy of continuous up-gradation of technology and processes while maintaining its cost effectiveness by making optimum use of its resources and goodwill.

• Material: SS
• Brand Name: SHREE
• Usage: Industrial
• Color: Sky Blue
• Packaging Type: Wooden Box
• Country of Origin: India

EXPORTER OF BALL VALVE , BUTTERFLY VALVE 

• Material: Metal
• Application: Water Fitting
• Color: Blue, Sky Blue
• Technics: Gear Operated
• Pressure: Triple Offset Butterfly Valve
• Port Size: 0.1mm-5cm

We present to our clients, Wafer Type Butterfly Valve. The Wafer Type Butterfly Valve has been fabricated from the best quality raw material, by our erudite professionals. The Wafer Type Butterfly Valve has been precision engineered to fulfill diverse industrial requirements and is available in various sizes and specifications. In addition, te Wafer Type Butterfly Valve complies with the prevailing industrial standards. Features Strong and sturdy Long working life Wide ranging applications High durability

• Material: Brass
• Usage: Water Fitting

• Country of Origin: India
• Material: Cast Iron
• Certification: ISI Certified
• Application: Gas Flow
• Color: Blue
• Feature: Blow-Out-Proof
• Rubber Sleeve: Yes

Our clients can avail from us a quality-assured range of Open Body Pinch Valves. These valves are the modified version of laboratory pinchcock. The rubber sleeve in these valves are protected under the iron casting. These are made using latest machines and technologies as per the set industry standards. We also offer these products in customized forms as per the needs of the clients. Features: * Durable* Resistant to corrosion* Easy maintenance