Butterfly Valves Dealers in Naroda, Ahmedabad

WAFER TYPE AND FLANGED AND Actuator and Electrical Operated

• Material: PVC & Metal
• Usage: Water Fitting
• Finishing: Coated
• Mounting Type: Vertical
• Warranty: 1 Year
• Specialities: Investment Casting, Durable

• Country of Origin: India
• Brand Name: Komal valve
• Material: Carbon Steel
• Certification: ISO 9001:2008 Certified
• Usage: Water Fitting
• Number Of Way: 2way
• Valve Size: 1inch, 1/2inch, 1.1/4inch, 2inch, 3/4inch
• Packaging Type: Carton
• Type: Butterfly Valves
• Temperature Pressure: High Temperature Pressure
• Packaging Size: 10 Pieces
• Condition: New
• Finishing: Polished
• Corrosion Resistance: Yes
• Mounting Type: Vertical
• Warranty: 1 Year
• Driving Mode: Manual
• Media: Water
• Actuation Type: Single Acting
• Automatic Grade: Manual
• Overall Length: 6-10 Inch

• Valve Size: 1inch, 1/2inch, 1.1/2inch, 1.1/4inch, 2inch, 3/4inch
• Material: Brass, Stainless Steel, Metal, Gun Metal, Cast Steel, Cast Iron, Carbon Steel, Carbon Steeel,WCB, SS 304
• Number Of Way: 2way
• Connection Type: Flanged
• Disc Material: Stainless Steel
• Brand Name: Zebco
• Usage: Water Fitting
• Color: Blue
• Certification: ISO 9001:2008 Certified
• Actuator Type: Gearbox
• Packaging Type: Wooden Box, Carton
• Country of Origin: India
• Warranty: 12 months

• Country of Origin: India
• Material: Cast Iron
• Certification: ISI Certified
• Application: WATER, AIR, INDUSTRIAL
• Color: Blue
• Feature: Corrosion Proof
• Size: 1" TO 3"

Pinch valves, offered by our company, are the modified version of laboratory pinchcock in which rubber sleeve is protected under the casting made of cast iron. The main advantage of Pneumatic Pinch Valves is that the fluid passing from it does not come in contact with its metal parts except the sleeve. This property makes it corrosion resistive against the action of various fluids. Open Body Pinch Valves assure the smooth flow of water like pipeline and their collar sleeve eliminates gasket. Pinch valve is user friendly and can be operated easily as compared to other wheel operated valves. This valve allows positive control over flowing media because of its in between stoppage that gives desired throttling. These pinch valves are extensively used for handling corrosive slurry, liquid with solid suspensions, abrasive media, and many others. We offer pinch valve in best application range with flange as per BS, DIN, ASA & IS dimensions, and ranging between 15mm to 300mm. We are known widely as one of the proficient Pinch Valves Exporters and Suppliers. General Features & Highlights Seat Less & Glandless ValvesField Replicable Elastomer Sleeve.Elastomer Sleeve Having Four Reinforced LugsFlanged Ends & Drilled to Din, Ansi, Bs-10, Is, Etc.this Valve Incorporates allthe Design Modifications Based On Our Experience & is of Study Construction to Handle Abrasive Corrosive Media. BRIEF DETAILS OF PINCH VALVE Pinch Valve is a Seat less & Glandless valve.Pinch valve is a modified version of laboratory pinchcock. A rubber sleeve is protected under a cast iron casting.The fluid passing through do not come in contact with either body covering or any other metal parts of the valve except the sleeve.Hence the body and other metal parts are almost permanently not subjected to the corrosive action of the fluid.The flow through the valve is straight and full as that of a pipeline, when the valve is fully open. Further, the collar of the sleeve eliminates gasket.The valve is simple hand wheel operated of rising wheel type. Therefore the operation of the valve is just simple as other wheel operated valve.The in-between stoppage will allow the desired throttling. Thus the valve offers positive control over flowing media. Applications Pinch valve finds its best application in handling corrosive slurry, abrasive media, liquid with solid suspensions and many others, which are difficult to handle with seat valve. Range The flange of the pinch valve can be supplied in accordance to BS, DIN, ASA & IS dimensions The range for the valve is from 15 mm TO 300 mm. Actuation The valve can be supplied with Electrical and pneumatic actuation. Operating Manual OF PINCH VALVE THE PINCH VALVE is a modified version of the laboratory pinchcock. A rubber sleeve is protected under a Cast iron or Aluminum split body casting. The valve is a simple hand wheel operated of rising wheel type. The operation of the valve is same as other hand wheel operated valve, it closes when moved in clockwise direction and opens when moved in anticlockwise direction. The in-between stoppage will allow the desired throttling. Thus the valve offers positive control over flowing media. The flow through the valve is same as that of a pipeline, when the valve is in fully opened condition. Further, the rubber sleeve eliminates the need of a gasket. PRELIMINARY PRECAUTION On receipt of the valve please check the position of the valve, as it is advisable to keep the valve in fully opened condition. Also check the position of the travel limit nut, if found loose then tighten the set screw of the nut. INSTALLATION The valve can be installed without any gasket unless it is required for some specific purpose. Tighten the nut of the flanges evenly & equally, but avoid too much tightening. After installation check the free movement of the upper & lower pinching bar by opening & closing the valve. The valve is then ready for the service it is installed for. MAINTENANCE If the valve is found leaking through the seat after sometime even though in fully closed condition, then set the travel limit nut by just taking it 1 or 2 threads above & then tighten. This will allow more room for traveling of rubber sleeve & ensure the valve to zero leakage. This problem sometimes occurs when the sleeve is slightly worn out, when used under abrasive condition. Further, The Rubber sleeve of the valve up to 2” (50mm) have a single lug on either side and it goes into the hollow passage of the pinching bar where it is fixed with the lug clamping screws. In the higher sizes above 2” the sleeves have two lugs on either sides and is fitted overlapping the pinching bar. DISMANTLING THE VALVE & REPLACING THE RUBBER SLEEVE When the rubber sleeve is ruptured or totally worn out then it is to be replaced with a new one. In this case first dismantle the valve by following the instructions. Remove the hand wheel.Open the Tie Bar nuts.Disconnect the spindle from the Horseshoe connection and remove it completely with the bridge.REMEMBER not to temper the set screw of the yoke bush, unless if required it should be completely tight.Open out the nuts & bolts of the split body of the valve.Remove the screw of the lugs from both the pinching bars.Now fit the new rubber sleeve & reverse the operation to assemble the complete valve. NOTE It is advisable to keep a spare rubber sleeve for maintenance purpose, considering the self life of the Rubber as six months when packed & stored in dark. The Pinch valves should be stored in fully open condition only. We also offer complete spares of the valves, but request you to place your order a week in

We are engaged in manufacturing and supplying excellent quality pneumatic operated high performance butterfly valve to our valuable clients. Its popular among clients because of its long lasting life, performance and customers trust on our products. Salient feature size range: 1.12??? to 48??? construction type: double eccentric disc design body: wcb cf8 cf8m cast iron disc: wcb cf8 cf8m seat: ptfe(available epdmmetal to metal) shaft: aisi 410 304 316 plate mounting: namur standard pressure rating: ansi 150 class ansi 300 class(on request) end connection: wafer sandwiched lug type(on request) operating temp.range: -25??? to 180???(soft seating), -25??? to 600???(metal to metal seating) operating: hand lever, worm gera box, pneumatic actuated, electrical actuated

• Sizes: DN50 to DN900 ( NPS 2 to NPS 36)
• Pressure Rating: Class 150 & PN10 / PN 16
• Design & Manufacturing Standard: BS 5155, API 609, AWWA C504
• Face to Face Std.: BS 5155, API 609, AWWA C504
• End Connection Std.: BS 5155, API 609, AWWA C504, ASME B16.5 & ASME B16.10
• Testing Standard: API 598
• Type of Bore: Standard (Full Bore)
• End Connection Type: Wafer Type, Lugged Type, Flanged Ends, etc.
• Seat Design: Soft Seat – EPDM, Nitrile, Viton, PTFE, RPTFE, etc.
• Disc Design: Centre Disc, Offset Disc, Double Offset Disc, Triple Offset Disc,
• Operated Type: Hand Lever, Gear, Pneumatic Actuator, Bare Shaft, etc.

• Size: 2 to 24 Inch
• Material: Metal
• Application: Water Fitting
• Feature: Casting Approved, Durable
• Pressure Class: 150#
• Finish: Polished

• Material: Cast Iron, Stainless Steel
• Power: Manual
• Media: Air, Water, Gas
• Protection: IP 67 Weather Proof
• Applicable temperature: -15+150
• Feature: High durability, Low maintenance, Resistance to wear & tear

Bringing forth wide array of Butterfly Valves, we are amidst the celebrated Suppliers in this field. We are known for providing a qualitative array of products and thus our entire range is strictly checked against varied quality parameters.

• Type: Wafer Type, Sandwich Type
• Brand Name: SYSCHEM
• Size: Up to 42 Inch
• Material: Cast Iron/ WCB/ SS 304/ SS 316
• Pressure: PN6, PN10,PN16,PN24
• Port Size: Up to 42 Inch
• Model Name/Number: SYSCHEM
• End Connection: Flangelss
• Operator: Lever, Gear, Pnumatic Operated
• Valve Size: Up to 42 Inch

• Size: 40MM TO 1200MM
• Type: Wafer Type, Slim - Seal Butterfly Valves
• PRESSURE RATING ASA: 150#, 300#
• SEAT: Neoprene / Nitrile / Viton / Silicon / PTFE Butterfly Valves
• MOC: Cast Iron / Cast Steel / SS 304 / 316, SS 304L / 316L.

• Material: Brass
• Usage: Water Fitting

• Brand Name: MEGA VALVES
• Material: Cast Iron
• Power: Manual
• Pressure: PN 10/16
• Color: Blue, YELLOW
• Application: Gas Fitting, Oil Fitting, Water Fitting
• Technics: Gear Operated
• Certification: ISI Certified
• Feature: Casting Approved
• Size: UP TO 24 INCH
• Type: TEFLON
• Media: WATER / OIL / GAS
• Temperature Of Media: UP TO 180 D
• Country of Origin: India

Our FLOEC Lug Type Butterfly Valves are of different types according to technique of sealing the perimeter of the disc in its completely closed arrangement. Our valves offer very durable as well as flawless performance. Our valves are used in an extensive array of applications in the industries of petroleum, packed water, food products, chemicals, fertilizers, paint etc. They are anti-corrosive and resistant in abrasion in nature. The body seat of this valve is designed to offer very low torque, and a tight shut off with absolutely no leakage.

We are the leading exporter and supplier of this products.

• Pressure: As Per Size Pressure - 6Kg To 10 Kg
• Media: Water
• Power: Manual
• Material: PP (Polypropylene)
• Size: 2\
• Operator: Manual
• End Connection: Flange End

Available Size - 2" to 8" inch CONSTRUCTION : Single piece body. DESIGN AND MANUFACTURING STD. : As per Manufacturer's Standard END CONNECTIONS : Flanged as per ASA 150

• rubber diaphragms: black

We are manufacturer of rubber diaphragms . From epdm . Fda approved with test certificate. You can send us your requirement we will give you best price

* Wafer Type Butterfly valves * Lug Type Butterfly valve * Flanged Type Butterfly valve * Metal Seated Butterfly valves * Teflon Lined Butterfly valves * Fire Safe Design Butterfly Valve * Gear Pneumatic Operated