Butterfly Valves Dealers in Saraspur, Ahmedabad

• Valve Size: 50 Mm To 600 Mm
• Brand Name: Durga
• Material: Stainless Steel
• Country of Origin: India
• Usage: Industrial
• Diameter (mm): 50mm, 50-600
• Type: Industrial Valves
• Condition: New
• Finishing: Coated
• Warranty: 1 Year
• Temperature: -20 Degree C to 90 Degree C

• Size Range: 1.1/2″ to 14″
• Construction Type: Double Eccentric Disc Design
• Body: CF8 / CF8M
• Disc: WCB / CFB / CFBM / CAST IRON
• Seat: PTFF ( available EPDM / Metal to Metal) Replaciable
• Shaft: AISI 410 / 304 / 316
• Plate Mounting: NAMUR Standerd
• Pressure Rating: ANSI 150 Class
• Operating: -20 °C TO 180° c (Soft Seating PTFE)
• Temp. Range: -50 °C TO 350° c (Metal to Metal Seating)

We offer ball valves as per international standards as well as per clients' specifications and requirements. These ball valves are used generally for quick shut off. Features One piece body Size:50 mm to 400mmPressure Class: BS 6755 Part-1Desing: BS5 155 ,Api609,Mss sp 67&iso5752Suitable to: BS 10 Table D,E,F,PN10/16    

• white: white

Laxmi valve manufacturer is provide best quility product and service of manufacturering disc check, ball valve,spring loaded valve,fountain nozzle in ahmedabad,gujarat, india.

• Brand Name: PROLINE VALVES
• Material: CAST IRON DUCTILE IRON S.S. 304 S.S. 316 S.S. 316L DUPLEX S.G IRON ALUMINIUM M.S
• Country of Origin: AHMEDABAD
• Type: WAFER TYPES, DOUBLE FLANGE TYPE LUGGED TYPE DAMPER TYPE, FABRICATED TYPES ALL TYPES OF BUTTERFLY VAL
• Technics: ALL TYPES OF BUTTERFLY MANUFACTURER IN INDIA, LOWEST CHALLENGING RATES IN INDIA FOR BUTTERFLY VALVES
• Power: ALL TYPES OF POWER AVAILABLE WITH ELECTRICAL ACTUATOR OPERATION
• Pressure: PN 05, PN 10, PN 16, 150 #, 300# 600#
• Structure: CETRIC DISC DESIGN, OFF SET DISC DESIGN, DAMPER TYPE
• Media: WATER, AIR, OIL, STEAM, VACUUM, VARIOUS CHEMICAL, SLURRY, CHILLER WATER AND MANY MORE
• Port Size: 15 MM TO 500 MM

• Country of Origin: India
• Material: Cast Iron
• Certification: ISI Certified
• Application: WATER, AIR, INDUSTRIAL
• Color: Blue
• Feature: Corrosion Proof
• Size: 1" TO 3"

Pinch valves, offered by our company, are the modified version of laboratory pinchcock in which rubber sleeve is protected under the casting made of cast iron. The main advantage of Pneumatic Pinch Valves is that the fluid passing from it does not come in contact with its metal parts except the sleeve. This property makes it corrosion resistive against the action of various fluids. Open Body Pinch Valves assure the smooth flow of water like pipeline and their collar sleeve eliminates gasket. Pinch valve is user friendly and can be operated easily as compared to other wheel operated valves. This valve allows positive control over flowing media because of its in between stoppage that gives desired throttling. These pinch valves are extensively used for handling corrosive slurry, liquid with solid suspensions, abrasive media, and many others. We offer pinch valve in best application range with flange as per BS, DIN, ASA & IS dimensions, and ranging between 15mm to 300mm. We are known widely as one of the proficient Pinch Valves Exporters and Suppliers. General Features & Highlights Seat Less & Glandless ValvesField Replicable Elastomer Sleeve.Elastomer Sleeve Having Four Reinforced LugsFlanged Ends & Drilled to Din, Ansi, Bs-10, Is, Etc.this Valve Incorporates allthe Design Modifications Based On Our Experience & is of Study Construction to Handle Abrasive Corrosive Media. BRIEF DETAILS OF PINCH VALVE Pinch Valve is a Seat less & Glandless valve.Pinch valve is a modified version of laboratory pinchcock. A rubber sleeve is protected under a cast iron casting.The fluid passing through do not come in contact with either body covering or any other metal parts of the valve except the sleeve.Hence the body and other metal parts are almost permanently not subjected to the corrosive action of the fluid.The flow through the valve is straight and full as that of a pipeline, when the valve is fully open. Further, the collar of the sleeve eliminates gasket.The valve is simple hand wheel operated of rising wheel type. Therefore the operation of the valve is just simple as other wheel operated valve.The in-between stoppage will allow the desired throttling. Thus the valve offers positive control over flowing media. Applications Pinch valve finds its best application in handling corrosive slurry, abrasive media, liquid with solid suspensions and many others, which are difficult to handle with seat valve. Range The flange of the pinch valve can be supplied in accordance to BS, DIN, ASA & IS dimensions The range for the valve is from 15 mm TO 300 mm. Actuation The valve can be supplied with Electrical and pneumatic actuation. Operating Manual OF PINCH VALVE THE PINCH VALVE is a modified version of the laboratory pinchcock. A rubber sleeve is protected under a Cast iron or Aluminum split body casting. The valve is a simple hand wheel operated of rising wheel type. The operation of the valve is same as other hand wheel operated valve, it closes when moved in clockwise direction and opens when moved in anticlockwise direction. The in-between stoppage will allow the desired throttling. Thus the valve offers positive control over flowing media. The flow through the valve is same as that of a pipeline, when the valve is in fully opened condition. Further, the rubber sleeve eliminates the need of a gasket. PRELIMINARY PRECAUTION On receipt of the valve please check the position of the valve, as it is advisable to keep the valve in fully opened condition. Also check the position of the travel limit nut, if found loose then tighten the set screw of the nut. INSTALLATION The valve can be installed without any gasket unless it is required for some specific purpose. Tighten the nut of the flanges evenly & equally, but avoid too much tightening. After installation check the free movement of the upper & lower pinching bar by opening & closing the valve. The valve is then ready for the service it is installed for. MAINTENANCE If the valve is found leaking through the seat after sometime even though in fully closed condition, then set the travel limit nut by just taking it 1 or 2 threads above & then tighten. This will allow more room for traveling of rubber sleeve & ensure the valve to zero leakage. This problem sometimes occurs when the sleeve is slightly worn out, when used under abrasive condition. Further, The Rubber sleeve of the valve up to 2” (50mm) have a single lug on either side and it goes into the hollow passage of the pinching bar where it is fixed with the lug clamping screws. In the higher sizes above 2” the sleeves have two lugs on either sides and is fitted overlapping the pinching bar. DISMANTLING THE VALVE & REPLACING THE RUBBER SLEEVE When the rubber sleeve is ruptured or totally worn out then it is to be replaced with a new one. In this case first dismantle the valve by following the instructions. Remove the hand wheel.Open the Tie Bar nuts.Disconnect the spindle from the Horseshoe connection and remove it completely with the bridge.REMEMBER not to temper the set screw of the yoke bush, unless if required it should be completely tight.Open out the nuts & bolts of the split body of the valve.Remove the screw of the lugs from both the pinching bars.Now fit the new rubber sleeve & reverse the operation to assemble the complete valve. NOTE It is advisable to keep a spare rubber sleeve for maintenance purpose, considering the self life of the Rubber as six months when packed & stored in dark. The Pinch valves should be stored in fully open condition only. We also offer complete spares of the valves, but request you to place your order a week in

• Material: PVC & Metal
• Usage: Water Fitting
• Finishing: Coated
• Mounting Type: Vertical
• Warranty: 1 Year
• Specialities: Investment Casting, Durable

• Country of Origin: India
• Material: Stainless Steel
• Certification: ISO 9001:2008 Certified
• Color: Grey, Grey-silver, Shiny-silver, Silver
• Type: Butterfly Valves
• Condition: New
• Driving Mode: Gear
• Media: Air, Gas, Water
• Specialities: Investment Casting
• Size: 40MM TO 900MM

With us, clients can stay assured of the quality of the products as we make use of the first class raw material that is tested on several measures prior to product manufacturing. Therefore, we are reckoned as the best double flanged butterfly valve exporters in India and some other countries. We are appreciated amidst the celebrated names in the sphere of providing an exclusive range that includes double flanged butterfly valve. We ensure that the products reach your destination within the committed timeframe.

• Weight: 5Kg
• Packaging Type: Wooden Box
• Valve Size: 1inch
• Voltage Range: 24 V AC
• Brand Name: SRK
• Material: Stainless Steel
• Color: White
• Structure: U Section
• Diameter (mm): 40 Mm, 50mm
• Overall Length: 6-10 Inch
• Specialities: Non Breakable, Investment Casting, Heat Resistance, Casting Approved
• Diametre (milimetre): 100 To 1000 Mm
• Type: Industrial Valves
• Condition: New
• Finishing: Coated
• Automatic Grade: Manual
• Warranty: 1 Year
• Actuation Type: Single Acting

• Fluid temperature: 20 to 70 degree C
• Viscosity Range: 10 CST to 380 CST
• Normal flow capacity: 32 LPM
• Max flow capacity: 100 LPM
• Working Pressure Port T: 16 Mpa

We have numerous dealers and distributors associated with us to make our products available to buyers with ease and make timely delivery. We are a noteworthy name, engaged in offering qualitative lot of products that are the perfect outcome of premium material and modern work methods. Also, the material is sourced from the trusted places after complete quality checking.   Features : Accurate dimension Easy to install Robust construction

• Material: Metal
• Usage: Water Fitting
• Color: Sky Blue
• Number Of Way: 2way
• Brand Name: Audco
• Packaging Size: 10 Pieces
• Finishing: Polished
• Warranty: 1 Year
• End Connection: Butt Weld
• Size/Dimension: 15 to 600 mm
• Usage/Application: Water
• End Connection Type: Flanged
• Installation temperature: -29

• Country of Origin: Made in India
• Material: Stainless Steel
• Size: 0.5-4'
• Pressure: 900 PSI

• rubber diaphragms: black

We are manufacturer of rubber diaphragms . From epdm . Fda approved with test certificate. You can send us your requirement we will give you best price

• Material: Stainless Steel
• Media: Water
• Temperature Of Media: High Temperature
• Pressure: High Pressure
• Surface Finishing: Polished

flanged butterfly valve Valve comply with BS 5155, API 609, MSS SP 67 and ISO 5752 valves designed to fit without gaskets between flanges drilled to ANSI 125, DIN. ND 10,16, BS 10 tables D E and F of BS4505 PN 1016 tables 6,7 and 8 of IS: 6418 and tables 11,15 of IS:6392.

APPLICATIONS Water treatment plants Water distribution systems Sewage plants Power stations Chemical industries Steel mills Sugar factories / Breweries Textile industries Food processing industries Cement industries Paper Mill QUALITY FEATURES Excellent flow control in quarter turn operation. Compact space saving design. Low weight, low maintenance, log service life. Both shafts mounted in bearing supports for easy operating torques. Replaceable / Bonded seat options. Suitable for mounting between all standard flanges. Gasket packing not required to install between flanges. ORDERING DATA Size of valve. M.O.C. for body, disc & seat. If any specific change to standard material of other parts. Operation manual / Gearbox / Actuator (give details of Actuator). Details of flow medium i.e., name, temperature, pressure.

CodeSTD PackingSize 250103 1 2" 250104 1 2.50" 250105 1 3" 250106 1 4 250107 1 5" 250108 1

• Range :: 1″ to 30″
• Pressure Class :: PN-10 / PN-16 / 150#
• End Connections :: Flanged, Wafer, Lugged type
• Manufacturing Standards :: BS – 5155 / API – 609 / AWWA C – 504
• End flanges :: As per ANSI / BS / DIN
• Testing Standard :: API – 598

HAND LEVER , FINGER LEVER, ROLLER LEVER & FOOT OPERATED VALVES (3/2, 5/2, 5/3, - ( 1/4",  3/8",  1/2",  1") Medium:- Compressed Air, Filtered, Lubricated or Non Lubricated Operating Pressure:- 2-10 bar

• Construction :: Investment casted, slim seal, wafer type, double offset disc
• MOC :: WCB / CF8 / CF8M / CF3 / CF3M
• Size Ranges :: 40 NB TO 300 NB
• Design and Mfg Std :: API 609
• Inspection And Testing Std :: API 598
• Face To Face :: API 609 ‘B’
• End Connection :: Wafer type – suitable to fit between two flanges
• Pressure Rating :: ASA 150 #

Spherical Disc Type Butterfly Valves are giving extremely high performance at very lower operating torque with some significant features like lower weight, compact design, replaceable seat and easy maintenance. PTFE seat ensures smooth working life under temperature up to 210° centigrade. For higher size, these valves are strongly recommended.

Single Piece / Three Piece Design Body / Ball / Stem Material UPVC 25 mm to 200 mm available size Seat Material Teflon / PTFE Flanged End / Screwed End / Socket Weld End   Butterfly Valve Description Body / Disc / Stem Material UPVC 25 mm to 200 mm available size Seat Material Teflon / PTFE Wafer type

• Material: Stainless Steel
• Media: Air, Water, Gas
• Temperature Of Media: High Temperature, Low Temperature, Medium Temperature
• Power: Manual
• Valve Size: 15 mm to 25 mm
• Seal Form: Auto Sealed
• Work Pressure: 1.6 MPa