Control Valves Dealers in Memco, Ahmedabad (64 products available)

• Material: Stainless Steel
• Application: Water Fitting
• Feature: Good Quality, Durable, Corrosion Proof

Single piece ball valve, These Ball Valves come in Single Piece (12 to 4) Two Piece (1 to 8) as well as in Three Piece Design (12 to 12) to suit various critical, non-critical applications and pressure rating up to 1500 class in both full bore & regular (reduce) bore design.

• Control Pressure Range: 5-25 MPa
• Flow Capacity: 45 Lpm
• Fluid Temperature: -15 +80 Degree Cal
• Media: Oil
• Packaging Type: Box

• Size: 1.1/2inch, 1.1/4inch, 1/2inch
• Material: Metal
• Application: Gas Fitting, Oil Fitting
• Color: Blue
• Feature: Casting Approved, Durable
• Automatic Grade: Manual
• Pattern: Plain

• Size: 1/2" to 4" ( 15 MM to 100 MM)
• Design & Manufacturing Standard: BS 5351
• Testing Standard: DS 6755 Part - 1
• Body & Connector: AISI 304 / 316
• Ball: AISI 304/316/ASTM A 351 Gi. CF8/CF8M
• Stem: AISI 304 / 316
• Seat & Seal: PTFE
• Ends: Flanged to BS 10 Table - F
• Lever: CS / SS with PVC sleeve
• Option: Reduced Port.
• Ends: BS 10 Table D/E, ANSI B 16.5 RF (150#)

Simex offers the wide array of disc check valves which are having compact wafer design and low cost that made it a popular choice when space and price are major factors in valve selection. Our disc check valves are recommended after traps discharging into closed systems to guarantee against return or spill back. Dcvs feature a compact and rugged stainless steel design and are suitable for any process liquid & gas, not just steam. Main advantage of these check valves is they can be mounted between pipe flanges in any direction. Disc check valve which is having the movable disc that block the flow or allow forward flow. The seat opening cross-section may be perpendicular to the centerline between the two ports or at an angle. Although the disc check valves are available in various sizes in order to meet the requirements of different applications. The valve allows full, unobstructed flow and automatically closes as pressure decreases. These valves are fully closed when flow reaches zero, in order to prevent backflow.

We present to our esteemed clients, Jacketed Ball Valve. The Jacketed Ball Valve is an important industrial equipment, which has found diverse industrial applications. The Jacketed Ball Valve is manufactured in accordance with the international standards of quality. Fabricated from the best quality raw material, the Jacketed Ball Valve can be availed at nominal prices. Features

• Packaging Type: Carton
• Valve Size: 1inch, 1/2inch, 3/4inch
• Voltage Range: DC 12V, 24V
• Specialities: Durable
• Diametre (milimetre): 100 To 1000 Mm
• Type: Smart Gas and Water Valve
• Brand Name: SmartiQo
• Color: Black
• Condition: New
• Automatic Grade: Automatic, Manual
• Warranty: 2 Year
• Country of Origin: China
• Number Of Way: 2way
• Ambient Humidity: ＜95%
• Color: Black
• Product Name: WiFi Smart gas and water valve
• Feature: Adjustable Valve mounting Max. 1/2" inch size Pipe
• Feature: Valve pressure:1.6MP , Torque: 30-60KG.CM
• Feature: Compatible with Alexa and Google Assistant, IFTTT
• Feature: Time off WiFi valve auto: 5-10 seconds
• Power voltage:: DC12V 1A

• Hydraulic Modular Valves: Hydraulic Modular Flow Control Valves
• Hydraulic Modular Valves Control Type: Hydraulic Modular Valves

We are offering hydraulic modular valves. We have established ourselves as coveted organization, involved in manufacturing and supplying hydraulic modular valves that are widely appreciated for their durability and resistance against rust. These valves are manufactured using high grade raw material employing latest tools and techniques. All the valves offered by us are widely appreciated by our valuable clients for their excellent features such as high tensile strength. Further, we offer these valves in various sizes, dimensions and other specifications at an affordable rate. features: easy installation high reliabilitlong lasting anti-corrosive easy maintenance perfect fittings we are dealing & equivalent replacement to 1:1 hydraulic valves make : eaton hydraulic valves, parkar hydraulic valves, yuken hydraulic valves, rexroth hydraulic valves, vickers hydraulic valves also many other brands.

• Size: DN15 to DN200
• Application: Steam, Thermic Oil, Water, Chemicals
• Rating: ASA 150#
• Body Material: C.I.IS 210 Gr FG 200/ASTM A216 Gr WCB/ ASTM A 351 Gr CF8/CF8M
• Type: 2 way, 3 way
• Yoke: SG Iron
• Bonnet: Standard Carbon Steel Fabricated. Extension Column & Radiation Fins for 3 way Valves
• End Connections: Flanged according to ASA 150#
• Seat: S.S.304/316 Screw in Type
• Plug: S.S.304/316/410 ‘V’ Port Characteristics/Teflon Filled
• Shaft: SS.304/316 screwed in the Actuator Stem
• Sealing Type: Metal-to-Metal Seal/Soft Seal
• Packing Box: Preformed Rings in Graphoil Packings/Teflon Rings Combinations of Both
• Valve: Normally closed. Normally open on request
• Working Pressure: 10Kg/cm²
• Maximum Temperature: 180°C for 2 way & 400°C for 3 way Valves
• Testing & Inspection: Standard
• Seat Leak Test: 12.5Kg/cm² for 150#
• Body Hydraulic Test Pressure: 20Kg/cm² for 150#
• Valve Mounting: Horizontal
• Industries: Textiles, Plastics, Dairy, Pharmaceuticals, Food-Processing Petrochemicals, Lamination, Leather, Etc.

• Type: On Off type, Modulating Type
• Size: 1/2" to 6"
• Flow Pattern: 2 Way & 3 Way
• Actuator Travel: Linear
• Power Failure: Stay put (manual over ride optional)

FFV offer motorized control valves.these Electrical Actuator operated Control valves are design for on-off and throttling applications.these are widely used in oil and gas production industry.Where availability of power supply are in Wide range & from remote controlling room it is been operated.   Features Power supply availability of wide ranges Have less noise pollution Have less maintenance on over all accessories equipped by system Less friction & lubrication Components are lightweight Optional manual override Top indicators optional     Valve Body ASTM A 216 Gr. WCB/A 351 Gr. CF8 / CF8M Protection Class IP 55, IP 65 Enclosure Aluminum pressure die cast Motors Non Blocking A.C. motors/ Class F Power Supply 220/110 V AC 50/60 HZ 1 Phase Trims Stainless Steel 13 Cr Gland Packing & Seals PTFE,Graphoils Pressure Rating 150#,300# Temperature up to 450°C End Flanged to ANSI B16.5

• Construction:   One Piece Body
•   Design:   Top Entry
•   Size Range:   50, 65 & 80 mm. (Screwed/Plain End)
•   Max working temp.:   85°C (Consistently)
•   Gasket / Stem Seal:   Nitrile
•   Test Pressure:   10kg/cm²

Special Features of One Piece Top Entry Ball Valve : One Piece Ball Valve Is Manufactured By Polypropylene. One Piece Ball Valve Is Very Perfect And Needful For Drip Irrigation System. Chemical Industries And Suger Factory. It Is Working Maximum Temperature Of 85°C And Made From Original Teflon. All Internal Parts Can Be Replaced Without Removing The Valve From The Pipe Line. It's Black Color Resistivity Against The Ultraviolet. Water Tested At 10kg/Cm². No Leakage, Swelling Or Bursting Observed. One Piece Rugged Body Eliminates Joints, Union, Gasket, Fasteners And Consequently Elimanates And Corrosion.

• Type: Normally Closed / Normally Open / PID.
• Size: 1/2” to 8” (15mm to 200mm).
• Body Bonnet Mate: C.S.
• Trim Parts: SS 410 , SS 304.
• W. Pressure: 4 BAR, 6 BAR, 8 BAR, 10 BAR, 12 BAR / 20 BAR.
• Temp: 180°C, 300°C, 450°C.
• Action: Linear and Reversible With change of Power
• Media: Steam, Thermic Oil, Water, Chemical.
• Use in: Textile Industries / Food and Pharma / Beverage Plant / Packaging / Printing Industries / Cement Plant.
• As customer required: Manual Override Will Be Extra Charge.

• Material: Cast Iron
• Pressure: 5-10 Bar
• Finishing: Polished
• Packaging Type: Box
• Media: Water

electric butterfly valve Valve comply with BS 5155, API 609, MSS SP 67 and ISO 5752 valves designed to fit without gaskets between flanges drilled to ANSI 125, DIN. ND 10,16, BS 10 tables D E and F of BS4505 PN 1016 tables 6,7 and 8 of IS: 6418 and tables 11,15 of IS:6392.

• Construction :: Investment casted, slim seal, wafer type, double offset disc
• MOC :: WCB / CF8 / CF8M / CF3 / CF3M
• Size Ranges :: 40 NB TO 300 NB
• Design and Mfg Std :: API 609
• Inspection And Testing Std :: API 598
• Face To Face :: API 609 ‘B’
• End Connection :: Wafer type – suitable to fit between two flanges
• Pressure Rating :: ASA 150 #

PTFE Seat Butterfly Valves are giving extremely high performance at very lower operating torque with some significant features like lower weight, compact design, replaceable seat and easy maintenance. PTFE seat ensures smooth working life under temperature up to 210° centigrade. For higher size, these valves are strongly recommended.

Our long lasting pneumatic Control Valves are designed in a unique manner. Our industrial control valves are used in various fields and are highly effective. Our control valves are manufactured in a manner that they do not give any problem later on. We stand as an overriding control valves supplier in India.

A well known Direction Control Valve supplying company.

• PNEUMATIC TEST: 6 Kg/cm2
• SEAT & BACK SEAT: 22 Kg/cm2

Steam valve, DESIGN FEATURES globe valves MANUFACTURING STANDARDS : BS : 1873API-6DANSI B 16.34 FACE TO FACE AS PER ANSI B 16.10 ENDS FLANGED & DRILLED AS PER ANSI B 16.5 R.F. TESTED AS PER BS : 5146 ABAILABLE WITH ACTUATOR OPERATOR ABAILABLE WITH WXTENSION STEM

• Size: 10 mm to 50 mm

Steam valve High velocity of flashing condensate create low pressure beneath the disc, at the same time pressure is build up in the chamber that force the disc on the seat. Now the condensates in the chamber decrease the pressure and when it is lower then the inlet pressure, the disc lifts. This cycle repeats again and again.

  STARTEK Single Plate Wafer Check Valves conform to API 6D-ISO 14313/API 594/API Pressure Ratings to ASME B 16.34 class 150(PN 20) through 2500(PN 420) and API Pressure class 2000PSI through 10000 PSI and class 125,PN10 through PN40 Single Plate Wafer Type Design suitable for mounting between flanges. One piece body cofiguaration provides reduced weight and size.this results savings in initial cost.space and pipe support element installation Extremely low crack opening pressure Low pressure drop Efficient flow characteristics Lapped body / disc seats No fugitive emissions   Option Short pattern and long pattern Closure assisted by spring loading Soft seat

• Material: SS
• Gland Packing: Teflon/Grafoil
• Plug Type: On/Off, Equal Percentage and Linear
• Model: CRM 2/3
• Size: 15 mm

From the team of engineers and developers, we (oilpower developers and manufacturers) bring some super power programs and products with extended range of direction and mobile control valves. We and our products are promising you for the increased performance in industrial and commercial machineries. The first and main objective for our directional and controlling valves and it is allowing us for the flow of liquid into several distinct paths. These paths are acquired from different sources and this duty lies over the mobile control valves exporters, direction control valve exporters, and many others.

• Material: Carbon Steeel, Metal, PP, PVC, Stainless Steel, UPVC
• Application: Gas Fitting, Oil Fitting, Water Fitting
• Color: Black, Blue, Red, Sky Blue, White
• Automatic Grade: Automatic, Manual
• Feature: Blow-Out-Proof, Casting Approved, Durable, Investment Casting
• Number Of Way: 2way, 3way
• Type: Pneumatic Control Valves
• Pattern: Plain
• Pressure: High, Low, Medium

We are the main supplier of this product.

With well-developed manufacturing facility to back us, we bring forth assorted range of Y Type Strainer Valve. The Y Type Strainer Valves are designed under strict quality control in accordance with the industry set norms. Buyers can acquire Y Type Strainer Valves in a variety of specifications from us. We are a well-reckoned name as Y Type Strainer Valve Manufacturer, Exporter and Supplier in Gujarat, India. Standard Features Y-type/Basket TypeStainless Steel Wire MeshOver 4 times Filtration Area Details Optional Features : Double meshSize : From 1� to 12�ANSI Class : #150 to #300Material : All Grades of Carbon Steels, Stainless Steels and Alloy SteelsEnds : Flanged and Butt-weld Ends Standards Pressure-Temperature : ANSI B16.34Face to Face : ANSI B16.10Inspection : API 598 Applications AirChemicalsSteam

SALIENT FEATURES More economical than conventional Sluice Valve. trouble free service with positive shutoff, totally reliable mechanically and structurally structurally strong & sound. Streamlined Disc gives smooth & flutterless flow with low pressure drop. Designed for Horizontal & vertical installation Compared to other Valves, weight wise or dimensionlly. It is easy to install.

• Body Type: 2 ways, 3 ways, angle & jacketed
• Size: 0.5” to 12" (15 mm to 300mm) or Required
• Pressure Class: 150 # to 1500# or Required
• Body material: All Cast alloys like CS, SS, CI, GM, etc.
• Bonnet: Standard bolted, extended with fins
• End cons: Flanged / Screwed, as per BS, ANSI,DIN & ISS Gland : Grafoil / PTFE Or Required
• Gland Type: Grafoil / PTFE Or Required

FLOW CONTROLS VALVE (D.R.V )   FLOW CONTROLS VALVE 5000 psi operating pressure • 8 sizes, 1/8” - 1-1/2” NPTF or SAE O-Ring threaded connections, or manifold mountingFlows to 80 GPM Carbon steel housing Provision for panel mountingTemperature Range: -4° to 212°F at full pressureSize up to 16 zinc plated • Size 20 and up phosphated